User's Manual

ManualsBrandsUnited Integrated Services ManualsElectronicsWIRELESS ALARM CONTROLLER

Wireless Alarm Controller User's Manual

Product Name: Wireless Alarm Controller

Model No: WAC-110

Input Power: AC 120V, 50/60Hz

Features Description :

1. Base on wireless way to receive from repeater alarm status. Be able to use many

WAC-110 (Wireless alarm controller) to provide wider range of alarm that increases

protection of everyday.

2. WG-110 (Wireless Gateway) receives alarm information from WCS-110 (Wireless contact

sensor) or WMS-110 (Wireless motion sensor) …etc. WG-110 (Wireless Gateway)

transmission alarm state to WR-110 (Wireless Repeater).When WR-110 (Wireless Repeater)

pass alarm state toWAC-110(Wireless alarm controller) then alarm sound out.

3. Easy install, only Insert the WCS-110 (Wireless contact sensor) to power plug. If power

lose the WCS-110 (Wireless contact sensor)well send RF

signal and alarm sound

4. If alarm the panel limpid button red LED well flesh. Push the button then alarm is ceased.

5. 100dB sound of alarm.

6. Easy link, when install at the first time to press the set button on the side of product

binding with repeater.

Outline Dimensions :

Summary of content (4 pages)

PAGE 1
Wireless Alarm Controller User's Manual Product Name: Model No: Input Power: Wireless Alarm Controller WAC-110 AC 120V, 50/60Hz Features Description : 1. Base on wireless way to receive from repeater alarm status. Be able to use many WAC-110 (Wireless alarm controller) to provide wider range of alarm that increases protection of everyday. 2. WG-110 (Wireless Gateway) receives alarm information from WCS-110 (Wireless contact sensor) or WMS-110 (Wireless motion sensor) …etc.
PAGE 2
Feature Locator :: 1. State of LED window 2. Button and red LED 3. Alarm voice hole 4. (SET) Setting button 5. America power plug Installation Hints :: 1. First time when WAC-110 into the power plug., please wait 3~5 minute let the battery of WAC-110 charge in advance. 2. Linking way with WR-110 needs to press set button of side of WAC-110. Continuing press set button of bottom of WR-110. Wait for 30sec. to 1 minute. If linking success indicator light of LED will flash three times.
PAGE 3
2. Problem : Unable to link with WR-110 (wireless repeater). Solution : a. It needs to confirm the distance between WAC-110 (Wireless alarm controller) and WR-110 (Wireless repeater). Wireless connects in non-camouflage straight line effective range 10 meters. May pull closer between booth's distance test to have a look first, whether to have the improvement segment condition Specification: Wireless Alram Contrller Model No. WAC-110 Electrical Specification Transmit Frequency 2.
PAGE 4
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.