User's Manual

Wireless Motion Sensor User's Manual

Product Name : Wireless Motion Sensor

Model No : SMT-230

Input Power: 4.5V DC(Battery) / 5V/1A(Power Adaptor)

Features Description:

1. The use of Infrared Motion Detection of sensor detector, it self cannot transmits light

wave of the infrared.

2. The use of three UM-3 AA 1.5V alkaline batteries，battery power is insufficient to inform

the host will automatically operate a very low power, the battery can be used for more

than one years.

3. Easy link, when install at the first time to press the set button on the side of product

Joining with Gateway、Panel Coordinator or Route.

4. Can use the WPW-220 (Wireless Power Controller) do so with even control, For

example: Corridor night auxiliary lighting.。

5. When the device is connected to the power supply, it will automatically cut off the

battery power.

6. This device must be compatible with Gateway using, if beyond the effective reception

distance will not be used.

Outline Dimensions:

PAGE 1
Wireless Motion Sensor User's Manual Product Name : Wireless Motion Sensor Model No : SMT-230 Input Power: 4.5V DC(Battery) / 5V/1A(Power Adaptor) Features Description: 1. The use of Infrared Motion Detection of sensor detector, it self cannot transmits light wave of the infrared. 2. The use of three UM-3 AA 1.5V alkaline batteries，battery power is insufficient to inform the host will automatically operate a very low power, the battery can be used for more than one years. 3.
PAGE 2
Installation Hints: 1. First use UM-3 AA 1.5V alkaline batteries into SMT-230 (Wireless Motion Sensor) battery holder, and check the battery positive and negative polarity marked is correct. 2. The SMT-230 (Wireless Motion Sensor) by pressing the SET button at the side, and then press the Gateway、Panel Coordinator or Route at the bottom of the SET button, Wait for 1 second to 15 seconds. If green LED indicator light flash and long light that means linking success.
PAGE 3
Input : AC 100 ~ 240V , 47 ~ 63Hz at AC Adapter 0.19A MAX Output : DC 5V/1A 5W MAX Battery Type AA Alkaline battery x 3 Battery Life up to 3 year Sensor Detection Range 8 M 25°C, Angle 110, LED Indicator Red Environmental Requirement Operating Temperature 0°C to 40°C Storage Temperature -10°C to 55°C Humidity 90% RH Max., Non-Condensing Mechanical Specification Dimension (WxHxD, mm) 86.3*53.