Rugged Handheld Computer - TB128 - User's Manual Version 1.0 © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Revision History Date Change Description Version © 2017 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Preface About This Manual Thank you for purchasing the unitech product. This manual explains how to install, operate and maintain our product. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, such as photocopying, recording, or information storage and retrieval systems, without permission in writing from the manufacturer. The material in this manual is subject to change without notice.
1. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure requirements, avoid direct contact to the transmitting antenna during transmitting. Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. 3.
European Conformity Statement unitech Electronics co., Ltd herewith declares that the unitech product is in compliance with the essential requirements and all other provisions of the R&TTE 1999/5/EC directive, the EMC 2014/30/EU directive and the Low Voltage 2014/35/EU directive. The declaration of conformity is available for download at : https://portal.unitech.
Laser Information The unitech product is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J and to the requirements of IEC 825-1. Class II and Class 2 products are not considered to be hazardous. The unitech product contains internally a Visible Laser Diode (VLD) whose emissions do not exceed the maximum limits as set forth in the above regulations.
Battery Notice 1. To guarantee optimal performance, it is recommended that rechargeable batteries be replaced every year, or after 500 charging cycles are completed. It is normal for the battery to balloon or expand after one year or 500 cycles. Although it does not cause damage, it cannot be used again and must be disposed of according to the location's safe battery disposal procedures. 2. If a battery performance decreases more than 20%, the battery is at the end of its life cycle.
CAUTION! RISK OF EXPLOSION IF BATTERY IS REPLACED INCORRECTLY. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Battery charge notice It is important to consider temperature when the battery pack is charging. Charging is most efficient at normal room temperature or in a slightly cooler environment. It is essential that batteries are charged within the stated range of 0°C to 40°C. Charging batteries outside of the specified range could damage the batteries and shorten their life cycle.
Storage and safety notice Although charged batteries may be left unused for several months, their capacity may be depleted due to build up of internal resistance. If this happens, they will require recharging prior to use. Batteries may be stored at temperatures between -20°C to 60°C, however they may deplete more rapidly at higher temperatures. It is recommended to store batteries at room temperature. * The message above only applies to the usage of the removable batteries.
Hearing Damage Warning Zx.3 Warning The warning shall be placed on the equipment, or on the packaging, or in the instruction manual and shall consist of the following: - the symbol of Figure 1 with a minimum height of 5 mm; and - the following wording, or similar : To prevent possible hearing damage, do not listen at high volume levels for long periods.
Worldwide Support unitech’s professional support team is available to quickly answer questions or assist with technical-related issues. Should an equipment problem occur, please contact the nearest unitech regional service representative. For complete contact information please visit the Web sites listed below: Taipei, Taiwan – Headquarters Europe Tel: +886-2-89121122 Tel: +31-13-4609292 E-mail: info@hq.ute.com E-mail: info@eu.ute.com Address: 5F, No.
Warranty Policy The following items covered under the unitech Limited Warranty are free from defects during normal use: The warranty period is varied from each country. Please consult with your supplier or unitech local office for actual length of warranty period to your purchased product. Warranty becomes void if equipment is modified, improperly installed or used, damaged by accident or neglect, or if any parts are improperly installed or replaced by the user. xii © 2016 unitech Electronics Co., Ltd.
Table of Contents Preface............................................................................................................. i Regulatory Compliance Statements .............................................................. i Laser Information ......................................................................................... v LED Information ........................................................................................... v Battery Notice...........................................
TB128 User’s Manual Overview 1.1 Package Please make sure the following contents are in the TB128 gift box. If something is missing or damaged, please contact your unitech representative. The standard package contents TB128 Battery Hand Strap USB cable (Standard USB to Micro USB) Power Adapter Regulatory Compliance Statements Quick start Guide QR code card Optional accessories Desk Dock Cradle 1 © 2016 unitech Electronics Co., Ltd. All rights reserved.
TB128 User’s Manual 1.2 Product Detail TB128 Overview 6. 1. 2. 3. 11. 8. 7. 10. 4. 5. 1. 7" LCD touchscreen 6. Trigger button 2. 2M pixels front camera 7. LED flashlight 3. LED indicator 8. 5M pixels rear camera with AF 4. Cradle connector 9. Speaker 5. Physical keyboard (37 keys) 10. Mounting screw for battery cover 11. Bar code Scan Engine 2 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd. 9.
TB128 User’s Manual 15. 12. 13. 14. 12. Micro USB port 13. DC-IN port 14. Earphone jack 15. Cradle connector 3 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
TB128 User’s Manual Physical keyboard overview 1. 6. 7. 8. 2. 3. 9. 4. 5. 10. 11. 12. 13. 14. 1. Power on/off key 8. Escape key 2. Android BACK key 9. Alpha/Numeric keys 3. Android HOME key 10. Enter key 4. Android APP List key 11. H.E.S. keys (programmable) 5. Soft keypad on/off key 12. Volume up/down keys 6. Function keys to enter F1-F10 13. 4 directional keys 7. Alpha key 14. Scan key 4 © 2016 unitech Electronics Co., Ltd. All rights reserved.
TB128 User’s Manual 1.3 Specifications System Features CPU Memory OS Languages support MTK MT8735 1.3Ghz Quad Core Processor 3GB Mobile DDR RAM 16GB eMMC NAND Flash Android 6.0 English, Simplified Chinese, Traditional Chinese, Japanese, Spanish, German, French and multiple languages Display Gorilla Glass II with capacitive touch panel 7" Color Transmissive TFT IPS LCD 720x1280 dots LCD Keypad 37 physical keys.
TB128 User’s Manual 2D (SE4750) (2D is only available when the 2D imager is on your device ) ISSN EAN Code 128 Code 39 Code 93 Code 11 Interleaved 2 of 5 Discrete 2 of 5 Codabar MSI Chinese 2 of 5 Matrix 2 of 5 GS1 DataBar(RSS) 2D symbologies PDF417 MicroPDF417 Code128Emulatio n DataMatrix DataMatrixInverse Maxicode QRcode MicroQR Aztec Aztec Inverse Han Xin Han Xin Inverse 1D symbologies UPC/EAN UPC‐A UPC‐E UPC‐E1 EAN‐8 EAN‐13 Booklan E
TB128 User’s Manual Bookland ISBN Format Decode UPC/EAN/JAN Supplementals Transmit UPC‐A Check Digit Transmit UPC‐E Check Digit Transmit UPC‐E1 Check Digit UPC‐A Preamble UPC‐E Preamble UPC‐E1 Preamble Convert UPC‐E to A Convert UPC‐E1 to A EAN‐8/JAN‐8 Extend Postal Netherlands KIX Code USPS 4CB/One Code/Intelli gent Mail UPU FICS Postal GS1 DataBar (RSS) Composite Composite CC‐C Composite CC‐A/B Composite TLC‐39 UCC Coupon Extended Code ISSN EAN Engines 1D S
TB128 User’s Manual 2D SE4750SR ( LASER AIMER ) : Sensor Resolution: 1280 x 960 pixels Field of View: Horizontal: 48°, Vertical: 36.
TB128 User’s Manual Environmental Operating temperature Storage temperature 14°F to 122°F (-10°C to 50°C) Relative Humidity 5% ~ 95% ( non-condensing ) -4°F to 140°F (-20°C to 60°C) Drop test to 1.2 meter Concrete Environmental IP65 Sealing Vibration and Shock MIL-STD-810G test Mobile Device Management Software and Service MoboLink® FCC ID HLETB128BTNF 9 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
TB128 User’s Manual 1.4 Getting Started 1.4.1 Installing the Battery 1. Using a proper tool (ex. a coin) to loosen the two screws on the battery cover by turning anticlockwise. 2. Put battery into battery compartment and put back cover. 3. Lock the two screws on the battery cover by turning clockwise. 10 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
TB128 User’s Manual NOTE: After installing the battery, make sure the battery cover is securely closed, or you may be unable to turn ON the terminal. WARNING! There is a risk of fire and burns if the battery pack is handled improperly. DO NOT disassemble, crush, puncture, short external contacts, or dispose the battery pack in fire or water. DO NOT attempt to open or service the battery pack. Dispose of used batteries according to local recycling guidelines in your area. 1.4.
TB128 User’s Manual 1.4.3 Turning on the terminal for the first time After you have initially charged your device for about 24 hours, the device is ready to be used. You can now start up your device. You can then set up the languages, WiFi setting, and date and time. Power-On Button Turn ON your device by pressing the power button on the physical keyboard. 1.4.4 Checking the LED status Status Message Power LED Description Blue light blinks Message received Lights Red The battery is charging.
TB128 User’s Manual Checking the Battery Status To check the battery level and to access the battery usage menu 1. From your Home screen, tap . 2. Find and tap Settings. 3. Find and tap Battery. 13 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
TB128 User’s Manual 1.4.5 Using the SD/SIM Card The TB128 has SD/SIM card slots inside the battery compartment. Inserting a SD/SIM Card 1. Using a proper tool (ex. a coin) to loosen the two screws on the battery cover by turning anticlockwise. 2. Remove the back cover and pull the battery out. 3. Now you can access the micro SD card slot and SIM card slot. Micro SD card slot SIM card slot © 2016 unitech Electronics Co., Ltd. All rights reserved.
TB128 User’s Manual 4. Put battery into battery compartment and put back cover. 5. Using a proper tool (ex. a coin) to Lock the two screws on the battery cover by turning clockwise. Removing the SD/SIM Card 1. 2. 3. 4. 5. 6. 7. Using a proper tool (ex. a coin) to loosen the two screws on the battery cover by turning counterclockwise. Remove the battery cover and the main battery. Press the card in and release. The card pops out. Remove the card from the slot. Put the battery back into the battery cover.