Rugged Handheld Computer - PA720 - User's Manual Version 1.2 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Revision History Date Change Description Version 20160726 first published version 1.0 20160817 Modified 2.3, 2.4 1.1 20160829 Modified power source 1.2 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Preface About This Manual Thank you for purchasing the unitech product. This manual explains how to install, operate and maintain our product. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, such as photocopying, recording, or information storage and retrieval systems, without permission in writing from the manufacturer. The material in this manual is subject to change without notice.
1. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure requirements, avoid direct contact to the transmitting antenna during transmitting. 3.
European Conformity Statement unitech Electronics co., Ltd herewith declares that the unitech product is in compliance with the essential requirements and all other provisions of the R&TTE 1999/5/EC directive, the EMC 2004/108/EC directive and the Low Voltage 2006/95/EC directive. The declaration of conformity is available for download at : https://portal.unitech.
Taiwan NCC Warning Statement 交通部電信總局低功率電波輻射性電機管理辦法 第十二條:經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者 均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 第十四條:低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有 干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。 低功率射頻電機需忍受合法通信或工業、科學及醫療用電波輻射性電機設備 之干擾。 注意事項: 1. 使用過度恐傷害視力。 2. 使用30分鐘請休息10分鐘;2歲以下幼兒不看螢幕,2歲以上每天看螢幕不要超過 1小時。 3. 減少電磁波影響,請妥適使用。 SAR 標準值 2.0W/Kg,送測產品實測值為 0.217 W/kg@10g iv © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Laser Information The unitech product is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J and to the requirements of IEC 825-1. Class II and Class 2 products are not considered to be hazardous. The unitech product contains internally a Visible Laser Diode (VLD) whose emissions do not exceed the maximum limits as set forth in the above regulations.
Battery Notice 1. To guarantee optimal performance, it is recommended that rechargeable batteries be replaced every year, or after 500 charging cycles are completed. It is normal for the battery to balloon or expand after one year or 500 cycles. Although it does not cause damage, it cannot be used again and must be disposed of according to the location's safe battery disposal procedures. 2. If a battery performance decreases more than 20%, the battery is at the end of its life cycle.
CAUTION! RISK OF EXPLOSION IF BATTERY IS REPLACED INCORRECTLY. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. 如果更換不正確之電池行事會有爆炸的風險 請依製造商說明書處理用過之電池 如果更换不正确之电池行事会有爆炸的风险 请依制造商说明书处理用过之电池 Battery charge notice It is important to consider temperature when the battery pack is charging. Charging is most efficient at normal room temperature or in a slightly cooler environment. It is essential that batteries are charged within the stated range of 0°C to 40°C.
Product Operation and Storage Notice The unitech product has applicable operation and storage temperature conditions. Please follow the limitation of suggested temperature conditions to avoid failure, damage or malfunction. *For applicable temperature conditions, please refer to the specification of each product. Adapter Notice 1. 2. 3. 4. Please do not leave the power adapter in the socket when it is not connected to your unitech product for charging.
Hearing Damage Warning Zx.3 Warning The warning shall be placed on the equipment, or on the packaging, or in the instruction manual and shall consist of the following: - the symbol of Figure 1 with a minimum height of 5 mm; and - the following wording, or similar : To prevent possible hearing damage, do not listen at high volume levels for long periods.
Worldwide Support unitech’s professional support team is available to quickly answer questions or assist with technical-related issues. Should an equipment problem occur, please contact the nearest unitech regional service representative. For complete contact information please visit the Web sites listed below: Taipei, Taiwan – Headquarters Europe Tel: +886-2-89121122 Tel: +31-13-4609292 E-mail: info@hq.ute.com E-mail: info@eu.ute.com Address: 5F, No.
Warranty Policy The following items covered under the unitech Limited Warranty are free from defects during normal use: The warranty period is varied from each country. Please consult with your supplier or unitech local office for actual length of warranty period to your purchased product. Warranty becomes void if equipment is modified, improperly installed or used, damaged by accident or neglect, or if any parts are improperly installed or replaced by the user. xi © 2016 unitech Electronics Co., Ltd.
Table of Contents Preface............................................................................................................. i Regulatory Compliance Statements .............................................................. i Laser Information ......................................................................................... v LED Information ........................................................................................... v Battery Notice...........................................
Chapter 3 – Introduction to Applications.........................................45 3.1 Scan Service ........................................................................................ 45 3.2 File Manager ........................................................................................ 49 3.3 Update Center ...................................................................................... 51 3.4 Sound Recorder ...................................................................................
PA720 User’s Manual Chapter 1 - Overview 1.1 Package Please make sure the following contents are in the PA720 gift box. If something is missing or damaged, please contact your unitech representative.
PA720 User’s Manual 1.2 Product Detail PA720 Front View Receiver 5 megapixel camera Back button Camera button Microphone Home screen button Menu button 2 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual PA720 Rear View Barcode scanner window 8 megapixel / Autofocus camera Flash LED Reset button Knobs Battery cover Speaker Cable / Cradle connector 3 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual PA720 Left and Right View Earphone Jack Power key Volume up/down Push to talk Scanner trigger button 4 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 1.3 Specifications System Features CPU MT8735 1.3GHz Qual Core ARM A53 64bit Memory 3GB Mobile SDRAM 16GB eMMC / MLC Flash OS Android 5.1 Lollipop Languages support English, Simplified Chinese, Traditional Chinese, Japanese, Spanish, German, French and multiple languages Display Gorilla GlassⅢ with 5-point capacitive touch panel 4.
PA720 User’s Manual Engines 1D SE655 : Illumination/AIMER : LED 630 ± 30 nm Optical Resolution : 5 mil (minimum readable bar code module size) Scan Repetition Rate : Nominally 50 scans/second Print Contrast : 20% (minimum print contrast) Ambient Light Immunity Light Source: 4845(lux) ± 5% 2D SE4750SR ( LASER AIMER ) : Sensor Resolution: 1280 x 960 pixels Field of View: Horizontal: 48°, Vertical: 36.
PA720 User’s Manual External Storage Support MicroSD memory card up to 32GB Other Sensors G-sensor , Light + Proximity sensor , E-Compass Power Source Standard Battery 3120mAh / 3.6V, full charge should over 95% capacity Enclosure Weight No Engine Standard Battery: 277g;Double Battery: 307g 1D Engine Standard Battery: 297g;Double Battery: 327g 2D Engine Standard Battery: 307g;Double Battery: 337g Dimension 1D: Approximately 171.3mm (L) x 25.
PA720 User’s Manual 1.4 Getting Started 1.4.1 Installing the Battery 1. 2. 3. 4. To loosen the two knobs on the battery cover by turning counterclockwise. And pull the two knobs up to remove the battery cover. knobs Slide and position the battery pack, making sure the battery contacts are aligned with the contacts in the compartment. Battery Compartment Contacts Use your thumb to snap the battery in place. Plastic Tab Put back the battery cover. 8 © 2016 unitech Electronics Co., Ltd.
PA720 User’s Manual 5. To tighten the two knobs on the battery cover by turning clockwise. NOTE: After installing the battery, make sure the battery cover is securely closed, or you may be unable to turn ON the terminal. WARNING! There is a risk of fire and burns if the battery pack is handled improperly. DO NOT disassemble, crush, puncture, short external contacts, or dispose the battery pack in fire or water. DO NOT attempt to open or service the battery pack.
PA720 User’s Manual 1.4.2 Charging the Battery Before using the terminal for the first time, you need to charge it for about 24 hours. After that, you can charge the terminal for 4 hours to recharge the battery to full capacity. Charge the terminal using the USB charging cable or the docking station. 1. After PA720 is connected to the charging cable, push up the release buttons on the both sides of the USB charging cable to lock PA720. 2. Use USB charging cable to connect the AC adapter. 3.
PA720 User’s Manual 1.4.3 Turning on the terminal for the first time After you have initially charged your device for about 24 hours, the device is ready to be used. You can now start up your device. You can then set up the languages, WiFi setting, and date and time. Power-On Button Turn ON your device by pressing the power button on the right side of the terminal. 1.4.
PA720 User’s Manual 1.4.5 Using the SD/SIM Card The PA720 has SD/SIM card slots inside the battery compartment. Inserting a SD/SIM Card 1. To loosen the two knobs on the battery cover by turning counterclockwise. And pull the two knobs up to remove the battery cover. 2. Remove the battery cover and the main battery. 3. Now you can access the SD card slot and SIM card slot. Put the battery back into the battery cover. 12 © 2016 unitech Electronics Co., Ltd. All rights reserved.
PA720 User’s Manual 4. Replace the battery cover. To tighten the two knobs on the battery cover by turning clockwise. Removing the SD/SIM Card 1. 2. 3. 4. 5. 6. 7. To loosen the two knobs on the battery cover by turning counterclockwise. Remove the battery cover and the main battery. Press the card in and release. The card pops out. Remove the card from the slot. Put the battery back into the battery cover. Replace the battery cover. To tighten the two knobs on the battery cover by turning clockwise.
PA720 User’s Manual Chapter 2 – Installation & Operation 2.1 Barcode Setting 1. Tap go to APPS, and tap ScanService. © 2016 unitech Electronics Co., Ltd. All rights reserved. 14 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 2. You are now enter the ScanService application: There are three items appear on the screen : Settings, Test and Version. ■ Settings Tap the default barcode symbologies for a different application Tap On / Off to enable / disable to work in background Tap Exit to leave ScanService © 2016 unitech Electronics Co., Ltd. All rights reserved. 15 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual For Save / Load Settings, and Factory Default section, Please tap and then tap Save / Load Settings. To save settings, please tap Save Settings -- OK © 2016 unitech Electronics Co., Ltd. All rights reserved. 16 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual The save setting data is stored in File Manager. (Please see 3.2 File Manager ) © 2016 unitech Electronics Co., Ltd. All rights reserved. 17 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual ■ Test Scanned data information 2 1 Tap Clear : Clear all scanned data ① Tap Save to file. ② Choose the path and filename to save the scanned data. 18 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual ■ Version Touch and hold anywhere inside the yellow line area until the pop up screen shows up. To update ScanService, please tap Update to get the latest version. The recent version of ScanService © 2016 unitech Electronics Co., Ltd. All rights reserved. 19 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual ■ More Options For more options and settings, please tap . © 2016 unitech Electronics Co., Ltd. All rights reserved. 20 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 2.2 HF Setting 1. Tap go to APPS, and tap Settings. 2. Tap More and you will find NFC, and tap to enable / disable NFC. © 2016 unitech Electronics Co., Ltd. All rights reserved. 21 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 2.3 UHF Setting Current model is not available. 2.4 MSR Setting Current model is not available. 22 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 2.5 WWAN Setting 1. Turn off the terminal to insert the SIM card. Note : For the instruction, please refer to 1.4.5 Using the Micro SD/SIM Card. It only applies to the device which supports WWAN. 2. Turn on the terminal, 4G signal will show at the top of the screen. 2.5.1 Mobile network settings 1. Tap go to APPS, and tap Settings. © 2016 unitech Electronics Co., Ltd. All rights reserved. 23 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 2. Go to Wireless & networks, Tap More, and tap Cellular networks. 3. You can have more Cellular network settings in this section. For network type, please tap Preferred network type. © 2016 unitech Electronics Co., Ltd. All rights reserved. 24 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 2.6 WLAN Setting 1. Tap go to APPS, and tap 2. Go to Wireless & networks, Tap Wi-Fi Settings. © 2016 unitech Electronics Co., Ltd. All rights reserved. 25 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 3. To see available networks, turn Wi-Fi ON. And tap to choose the available networks. 4. Choose the available networks, and enter the Password and tap Connect. 26 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 2.7 PAN Setting 1. Tap go to APPS, and tap Settings. 2. Go to Wireless & networks, Tap Bluetooth (PAN) Tap ON / OFF to enable / disable Bluetooth (PAN). To pair the available device, turn Bluetooth ON to choose the available device. © 2016 unitech Electronics Co., Ltd. All rights reserved. 27 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 2.8 GPS Setting 1. Tap go to APPS, and tap 2. Go to PERSONAL , Tap Location. Settings. © 2016 unitech Electronics Co., Ltd. All rights reserved. 28 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 3. Tap ON/OFF for the permission to use your location information. 4. Tap Mode for more location mode settings. ■ High accuracy : Use GPS, Wi-Fi and cellular networks to determine location ■ Battery saving : Use Wi-Fi and cellular networks to determine location ■ Device only : Use GPS to determine your location © 2016 unitech Electronics Co., Ltd. All rights reserved. 29 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 2.9 PC Setting 1. Connect the USB charging cable to the USB port of the PC device. Release Buttons Push up : Lock Push down: Unlock 2. After connecting the terminal to PC with USB, you can find a removable storage on my computer. © 2016 unitech Electronics Co., Ltd. All rights reserved. 30 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 2.10 Camera Setting 1. Tap go to APPS, and tap Camera. Or use the camera button as below : 31 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 2. The following are the introduction of the camera interface. Swipe left / right Multi angle view mode for other options Panorama mode Motion Track mode Live photo mode Normal mode Slow motion HDR Flash Mode Camera switch Record / Camera Settings © 2016 unitech Electronics Co., Ltd. All rights reserved. 32 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 3. More options / settings ■ camera filter effects ( for normal mode only ) Swipe left / right for other filter effects ■ Tab for More settings as below. Main settings Camera settings Video Setting © 2016 unitech Electronics Co., Ltd. All rights reserved. 33 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 2.11 Performing a Hardware Reset You may have to perform a reset if the device freezes (i.e., the terminal no longer responds to the buttons or tapping on the screen). 1. 2. Use a pin, a paper clip, or tip of a pen. Lightly press the reset button located on the back side of PA720. Reset button 3. The terminal will restart the system after you press the reset button. © 2016 unitech Electronics Co., Ltd. All rights reserved.
PA720 User’s Manual 2.12 Performing Factory data reset 1. Tap go to APPS, and tap Settings. 2. 3. Go to PERSONAL , tap Backup & reset Go to PERSONAL DATA, tap Factory data reset © 2016 unitech Electronics Co., Ltd. All rights reserved. 35 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 4. Tap Reset phone and then tap ERASE EVERYTHING © 2016 unitech Electronics Co., Ltd. All rights reserved. 36 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 2.13 Programmable Keys The PA720’s keys can be programmed for users to be able to perform different functions or applications. 2.13.1 Programming a key 1. Tap go to APPS, and tap Settings. © 2016 unitech Electronics Co., Ltd. All rights reserved. 37 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 2. Go to SYSTEM, Tap Programmable keys, and select the keys to remap. (ex. tab Push toTalk ) 3. Tab one of KEYCODES or APPS that lists the available functions or applications and select one shortcut to map to the key. (ex. tab VOLUME_UP ) © 2016 unitech Electronics Co., Ltd. All rights reserved. 38 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 4. The key is successfully mapped to a key code. 2.13.2 Enable/ Disable wakeup After the key is mapped to a key code, check the Enable wakeup checkbox to wake PA720 by pressing the programmable keys when PA720 is in sleep mode. Note: This function only applies to KEYCODES. © 2016 unitech Electronics Co., Ltd. All rights reserved. 39 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 2.13.3 Export / Import a Programmable Key Configuration file ■ Export file 1. Tab 2. Select Export 3. Tab OK Programmable keys exported successfully © 2016 unitech Electronics Co., Ltd. All rights reserved. 40 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual The Programmable Key configuration can be exported to a text file or imported into PA720. Note: The configuration file (keys_config.txt) is saved in File Manger. (For File Manager setting, please refer to 3.2 File Manager ) © 2016 unitech Electronics Co., Ltd. All rights reserved. 41 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual ■ Import file Before importing the file, please make sure the configuration file (keys_config.txt) is in File Manager. 1. Tab 2. Select Import 3. Tab Ok Programmable keys imported successfully The new configuration will be applied immediately after import. © 2016 unitech Electronics Co., Ltd. All rights reserved. 42 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual Reset default 1. Tab 2. Select Reset to default 43 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 2.14 Battery Swap Please follow the steps for the battery swap. 1. Long press power botton until you see the pop up window and tap Batt swap. 2. The LED indicator will start showing solid red light. Please swap the battery after the LED red light goes off. Make sure do not turn on PA720 during the battery swap. 3. When the battery swap is done, you can press the power button to restart PA720. Note :Please see 1.4.1 Installing the Battery for more information.
PA720 User’s Manual Chapter 3 – Introduction to Applications 3.1 Scan Service 1. Tap go to APPS, and tap ScanService. Note : For more Scan Service settings, please refer to 2.1 Barcode Setting. © 2016 unitech Electronics Co., Ltd. All rights reserved. 45 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 2. You are now enter the ScanService application. Tap Test to start scanning barcodes. 3. Aim the Barcode Scan Engine to the barcode and press one of two scan trigger buttons. Barcode Scan Engine Scanner trigger button © 2016 unitech Electronics Co., Ltd. All rights reserved. 46 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 4. After scanning the barcodes, the screen will show the barcode information. Scanned data information 2 Tap Clear : Clear all scanned data 1 ①Tap Save to file. ②Choose the path and filename to save the scanned data. 47 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual ■ More Options For more options and settings, please tap ■ Auto Scan ■ Scan2Key Setting . ■ Device Option ■ Save/ Load Settings © 2016 unitech Electronics Co., Ltd. All rights reserved. 48 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 3.2 File Manager 1. 2. Tap go to APPS, and tap File Manager. : File categories : Search : Refresh : View as grid / Add folder / Add to bookmark / Settings / Manage bookmark © 2016 unitech Electronics Co., Ltd. All rights reserved. 49 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 3.2.1 Solutions Folder Tap Internal Storage; tap Solutions on the drop down menu. Note: The solutions folder is subject to change on different sub-release of OS. © 2016 unitech Electronics Co., Ltd. All rights reserved. 50 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 3.3 Update Center 1. Tap go to APPS, and tap Update Center. 2. To update or check the latest version of software and applications, you will need to do it manually. Refresh © 2016 unitech Electronics Co., Ltd. All rights reserved. 51 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 3.4 Sound Recorder 1. Tap 2. Recording : Tap red dot to start the sound recording. Record Button go to APPS, and tap Sound Recorder. Pause Stop © 2016 unitech Electronics Co., Ltd. All rights reserved. 52 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 3. Save files : Tap stop button during the sound recording and choose save. Tap to the recording file list. Save Button Recording file list 4. Delete files : Tap to the recording file list and long press the file you choose to remove. Tap file. and press OK to delete the 53 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 5. More settings : Tap ■ Voice quality for Voice quality / Recording mode. ■ Recording mode © 2016 unitech Electronics Co., Ltd. All rights reserved. 54 unitech is a registered trademark of unitech Electronics Co., Ltd.
PA720 User’s Manual 3.5 Push to Talk To operate push to talk, please go to Google Play store to download the walkie talkie apps which can support any android device. For example, Zello PTT Walkie Talkie is the most recommended walkie talkie app. Push to Talk 55 © 2016 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.