PA700 Rugged Handheld Computer User’s Manual Version 1.
Table of content Table of content..............................................................................................2 1. Package Contents......................................................................................3 2. Getting started ...........................................................................................4 2.1 Device overview ...................................................................................4 2.2 Assembly ..............................................
1.
2. Getting started Unitech PA700 is an Android platform device. Android platform device has great flexibility that allows you to make customized configurations and enhancements by install and remove Apps. With Android operation system, your device has limitless possibilities to update to latest features and improvements. 2.1 Device overview 1. Receiver 7. Back button 2. LED indicator 8. Flash LED 3. Search button 9. 5M Camera with AF 4. Microphone. 10. Reset button 5. Menu button 11.
13. Bar code Scan Engine 15. Volume Down button 14. Scan button 16. Volume Up button 17. Micro USB port 19. Power button 18. Phone jack 20.
2.2 Assembly Accessing battery, Micro SD card and SIM card 1. Using a proper tool (ex. a coin) to loosen the two screws on the battery cover by turning anticlockwise. 2. Remove the back cover and pull the battery out. 3. Now you can access the micro SD card slot and SIM card slot. 1. Micro SD card slot 2.
Put battery back to PA700 1. Using a proper tool (ex. a coin) to loosen the two screws on the battery cover by turning clockwise. 2. Put battery into battery compartment and put back cover .
2.3 Charging the battery Connect PA700 to the charger, it will be charged automatically. 1. Connect the standard USB connector to the charger. 2. Connect the micro USB connector to the micro USB port at the bottom. 3. Plug the AC charger into a wall outlet. If needed, attach a plug converter onto the AC charger. 2.4 Data Communicating with PC Device 1. Connect the standard USB connector to the USB port of the PC device.
2. Connect the micro USB connector to the micro USB port at the bottom. 2.5 LED status Green The battery is fully charged Lights Red The battery is charging. The battery level is between low and full Blue Message is received. 2.6 To check the battery level and to access the battery usage menu 1 From your Home screen, tap .
2 Find and tap Settings. 3 Find and tap Battery.
3. Basic Operation 3.1 Accessing and using applications To open the Application screen From your Home screen, tap . To browse the Application screen From the Application screen, flick right or left. To create a shortcut to an application on the Home screen 1 From your Home screen, tap . 2 Touch and hold an application icon and then the Home screen opens. 3 Drag the icon to the desired page on the Home screen by flicking left or rught, then release your finger.
To Remove a shortcut of an application on the Home screen 1 From your Home screen, touch and hold the icon of the desired application you want to remove 2 “X Remove” shows on the top of the home screen. 3 Drag the icon to be removed to the “X Remove”. Calling Call handling To make a call by dialing 1 From your Home screen, tap . 2 Find and tap Phone. 3 Enter the number of the recipient and tap Call. To delete a number, tap To end a call • Tap . 3.2 Barcode Scanning (For Imager Version only) 1.
3.3 RFID Sensing 1. Tap the NFC Reader .
4. Specification System Features CPU TI OMAP 4470 1.5Ghz Dual Core Processor Memory 1GB Mobile DDR RAM 8GB eMMC Flash OS Android 4.1.1 Jelly Bean Languages support English, Simp. Chinese, Traditional Chinese, Japanese, Spanish, German, French Display Gorilla Glass II with 5-point capacitive touch panel 4.
Other Sensors GPS eCompass Light & Proximity sensor G-sensor RFID/HF (Optional) Frequency: 13.56MHz Tag Support: ISO15693, ISO14443A , ISO14443B Support NFC GPS 12 x 12 mm patch antenna Power Source Main Battery 11.9Wh 3.7V @3220mAh Li-Polymer battery pack Backup Battery capacity 1 hour Enclosure Weight 285g (with battery) Dimension 160mm x17.
Appendix Worldwide Support Unitech’s professional support team is available to quickly answer questions or assist with technical-related issues. Should an equipment problem occur, please contact the nearest Unitech regional service representative. For complete contact information please visit the Web sites listed below: Unitech America Los Angeles, Houston http://us.ute.com e-mail: info@us.ute.com http://can.ute.com info@can.ute.com Mexico http://latin.ute.com e-mail: info@latin.ute.
Regulatory Compliance Statements FCC Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications.
FCC Label Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
TaiwanNCC Warning Statement 低功率電波輻射性電機管理辦法 第十二條: 經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用 者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 第十四條: 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現 有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。低功率射頻電機 需忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 SAR 標準值 2.0W/Kg,送測產品實測值為 w/Kg Laser Information The Unitech PA700 series is certified in the U.S. to conform to the requirements of DHHS/CDRH 21CFR Subchapter J and to the requirements of IEC 825-1. Class II and Class 2 products are not considered to be hazardous.
Battery Information CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.