ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST.CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE. BASIC ASSEMBLY TECHNIQUES When lock or spring washer is used in an assembly, please make sure the lock or spring washer is placed between the larger flat washer and the head of the screw or bolt. Position each part correctly and insert screws or bolts into their respective holes by hand tighten or using the proper hand tool.
/8 5/8
Align long and short aprons (#2,3) to the holes of the table legs (#4), then secure by using bolts (#E). Align table back to the table top (#1), then secure by using screws (#B). There will be no pre-drilled holes on the table top (#1).
DO NOT FULLY TIGHTEN BOLTS UNTIL ASSEMBLY IS COMPLETED FOR CHAIRS 2) Secure connecting bar (#7) to side frames (#5,6) by using bolts (#C). 3) Secure connecting bar (#7) to side frames (#5,6) by using bolts (#C) with washers (#D). 1) Align connecting bars (#7) to the holes of the side frames (#5,6), then secure lower holes of the connecting bars (#7) by using bolts (#A). Align seat back (#8) to the holes of the frames, then secure by using bolts (#A).
Rest seat board (#9) to the top of the table, then align seat frame to the holes of the seat board (#9). Secure by using bolts (#C).