User's Manual

ManualsBrandsUNION COMMUNITY ManualsElectronicsTHE PRODUCT IS GENERAL PURPOSE CARD READER USING RFID

VS-R20(SC & RF). User Guide

Version Eng-1.00

Summary of content (13 pages)

PAGE 1
VS-R20(SC & RF). User Guide Version Eng-1.00 Copyright 2000 By Union Community Co., LTD.
PAGE 2
Smart-i 사용자 가이드 2 Version Date Description Firmware Version 1.00 2012-0822 Initial Release 10.51.00000.00 < Glossary > z Admin, Administrator - As a user who can enter into the terminal menu mode, he/she can register/modify/delete terminal users and change the operating environment by changing settings. - If there is no administrator for a terminal, anyone can change the settings, so it is recommended to register at least one administrator.
PAGE 3
Smart-i 사용자 가이드 3 Table of Contents ..................................................................................... 2 ........................................ 오류! 책갈피가 정의되어 있지 않습니다. 1. Before use ........................................................................................... 4 1.1. Safety Precautions ..................... 오류! 책갈피가 정의되어 있지 않습니다. 1.2. Terminal Description ......................................................................... 5 1.3.
PAGE 4
Smart-i 사용자 가이드 4 1. Before use 1.1. Safety precautions z Warning Handling with wet hands or allowing liquid to flow into it is not advised. -> It may cause an electric shock or damage Do not place a fire source near the unit. -> It may cause a fire. Do not disassemble, repair, or modify the unit. -> It may cause an electric shock, fire or damage. Keep out of reach of children. -> It may cause accident or damage. an - If the above warnings are ignored, it may result in death or serious injury.
PAGE 5
Smart-i 사용자 가이드 5 1.2. Terminal Description 1.3. LED Signal during operation ● Abnorm al Red ON: When authentication is failed ● Success Green ON: When authentication is successful State White Flickering: Waiting for a card to input ON: If is set as “LED is always ON” in terminal settings ㈜유니온커뮤니티 / 서울시 송파구 방이동 44-3 현대토픽스 빌딩 3층 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.
PAGE 6
Smart-i 사용자 가이드 6 1.4. Necessary Keys during operation [F1]~[F4] [Hold down] - They are used to change authentication mode F4 - Hold [F4] key down longer than 4 seconds It is used to enter menu 1.5. Voice information during operation Action Voice information Authentication is successful You are authorized. Authentication is failed Please try again 1.6.
PAGE 7
Smart-i 사용자 가이드 7 2. Introduction 2.1. Features z Quick and convenient authentication function - Simple and quick authentication with only using a card z Card authentication method provided - 125khz card and 13.56Mhz card supported per product z IP65 Outdoor Rating – Die Cast Casing : The terminal can be installed outdoor.
PAGE 8
Smart-i 사용자 가이드 2.2. Configuration ㈜유니온커뮤니티 / 서울시 송파구 방이동 44-3 현대토픽스 빌딩 3층 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.
PAGE 9
Smart-i 사용자 가이드 9 2.3. Specifications Item Spec Description CPU 32bit RISC 72MHz ST Micro Pin Pad 4key F1~F4 LED 3 LED (Red, White, Blue), 4 LED (key_Led) Flash Internal 256k Byte , External 8Mbyte Number of enrolled users 10,000 users 50,000 Log Voice Message Various languages supported (Possible to download from PC) Possible to control volume Buzzer Sound Possible to control volume Card Module 125KHz RF 13.
PAGE 10
Smart-i 사용자 가이드 10 3. Environment settings 3.1.Check items before setting the environment 3.1.1. Entering menu ▶ [Hold F4 down] Æ (Red & Green LED On) Menu Mode If you hold [F4] key down longer than 4 seconds, you can enter menu mode. When you enter menu mode, red and green LED on a terminal are on to classify menu mode.
PAGE 11
Smart-i 사용자 가이드 11 4.2. Authentication 4.2.1. Card Authentication Swipe a card on the card input area. 4.3. Control Dip Switch It has 6 switches, and they are divided in 485 ID Setting (3pole), changing 485 <-> Wiegand (1pole), and selecting BLC015/BLC020/CP040(2pole) ↓ 1 Functio n 2 485 ID Setting 3 4 485 <-> Wiegand 5 6 BLC015/BLC020/CP04 0 7 8 Admin Not using ※ VS-R20 enables to change to Wiegand In mode or to Wiegand Out mode with using SW52.
PAGE 12
Smart-i 사용자 가이드 12 - 485 ID Setting (No.1,2 and 3 Switch) 1 2 Function 3 ID Value 0 0 0 0 0 0 1 1 0 1 0 2 0 1 1 3 1 0 0 4 1 0 1 5 1 1 0 6 1 1 1 7 - Wiegand Setting (No.1,2 and 3 Switch) Bits 1 2 3 0 0 0 26bit 1 1 1 34bit Function - Changing 485 <-> Wiegand (No. 4 Switch) 4 Mode 1 Weigand 0 RS485 Function - Changing BLC015/BLC020/CP040 (No.
PAGE 13
Smart-i 사용자 가이드 13 * NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. ㈜유니온커뮤니티 / 서울시 송파구 방이동 44-3 현대토픽스 빌딩 3층 (138-050) Tel : 02-6488-3000 , Fax : 02-6488-3099, E-Mail :sales@unioncomm.co.kr http://www.unioncomm.co.