VIRDI 6000 TM Configuration Manual Draft version eng-1.01 Copyright 2006 By UNION COMMUNITY Co., Ltd.
VIRDI 6000 TM Administrator Manual Disclaimers Information in this document is provided in connection with UNION COMMUNITY products. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document.
VIRDI 6000 TM Administrator Manual sensor and in-house one-stop processing capability regarding hardware, software, product design, etc., our services to government sector and various commercial sectors like security, construction and enterprise are in full swing through fast problem-solving approach to meet market trends or demands. As a result, UNION COMMUNITY exports its market-proven fingerprint products to over 40 countries including Japan, USA, Europe and China.
VIRDI 6000 TM Administrator Manual < Glossary> l Admin, Administrator - As a user who can enter into the terminal menu mode, he can register/modify/delete terminal users and change the operating environment by changing settings. - If there is no administrator for a terminal, anyone can change the settings. In this regard, it is recommended to register at least one administrator.
VIRDI 6000 TM Administrator Manual l Function keys [F1], [F2], [F3], [F4], [ENTER] are used, and they are used for direct authentication and each key represents each authentication mode. UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong, Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099, E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.
VIRDI 6000 TM Administrator Manual Table of Contents UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong, Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099, E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.
VIRDI 6000 TM Administrator Manual ..................................................................................................................................... < Glossary>................................................................................................................ 4 Table of Contents ....................................................................................................... 6 1. Before use...............................................................................
VIRDI 6000 TM Administrator Manual 3.2.1.6. User Picture Registration ................................................... 39 3.2.1.7. User Type (Normal/Administrator) ..................................................... 39 3.2.2. Deleting a User ................................................................... 40 3.2.3. Modifying a User ..................................................................... 41 3.2.4. Viewing Users ...................................................................
VIRDI 6000 TM Administrator Manual 3.5.3.2. Sound Volume ..................................................................................... 53 3.5.4. Date/Time Settings .................................... 54 3.5.3.2. Display Format .................................................................................... 54 3.5.3.2. Set Current Date .................................................................................. 55 3.5.3.3. Set Current Time .................................................
VIRDI 6000 TM Administrator Manual 3.7. Theme Settings .......................................................................... 67 3.7.1. Main Background ................................................................................... 67 3.7.2. Daily Background Update...................................................................... 67 3.7.3. Arrange Icons ......................................................................................... 68 3.8. Terminal Information .......................
VIRDI 6000 TM Administrator Manual 1. Before use 1.1.0. Safety precautions l Warning Handling with wet hands or allowing liquid to flow into it is prohibited. -> It may cause an electric shock or damage. Do not place a fire source near the terminal. -> It may cause a fire. Do not disassemble, repair, or modify the terminal at discretion. -> It may cause an electric shock, fire or damage. Keep out of reach of children. -> It may cause an accident or damage.
VIRDI 6000 TM Administrator Manual 1.1.1. Terminal description 1 12 2 11 3 10 4 9 5 No.
VIRDI 6000 TM Administrator Manual 1.1.2. List of Icons During normal operation or when a new event occurs an icon will appear on the current display. Each icon is a symbol representing the event that has just occurred. Below is a list of possible icons that can appear on the display. Icon Description ID Icon – displayed when an id number is used to access the terminal. Password Icon – displayed when a password is used to access the terminal.
VIRDI 6000 TM Administrator Manual Fire Status Icon ON – when the terminal is notified of an external fire event this picture will appear. If there is no fire trouble no icon will appear. Door Status Icon OPEN – when the door connected to the terminal is opened this picture will appear. Door Status Icon CLOSE – when the door connected to the terminal is closed and normal status this picture will appear.
VIRDI 6000 TM Administrator Manual Configuration Button – when terminal setup and configuration is needed touching this button will enter terminal configuration mode. See configuration manual for setup details. Status Bar – all status items will appear in this bar. The text item in the center will show the current status of the terminal. Access; Attend, Leave, In, Out, Meal etc. UNION COMMUNITY Co., Ltd.
VIRDI 6000 TM Administrator Manual 1.1.3. Voice Operation Voices are played during certain events. Below is a list of possible voices that will be played. Voice volume can be controlled separately from the sound volume. The voice feedback can be turned off if needed. “Please enter your fingerprint” Enter fingerprint using the fingerprint input window “You are authorized” Successful authentication “Please try again” Authentication failed “Input your ID” When a user ID is required 1.1.4.
VIRDI 6000 TM Administrator Manual The example windows show the red areas that are interactive. When touching the number field entry area a number pad will appear for you to enter data. When touching a button the image will change. When touching a combo box, a list of items will appear, while your finger is down slide your finger to the selection and release. For Dialog Buttons and Check Boxes just touch the area and the option will change to a new icon.
VIRDI 6000 TM Administrator Manual 1.1.7. Correct fingerprint registration and input methods The AC6000 makes it easy for scanning fingerprints. The color LCD will show a picture of the fingerprint on the display, this picture is not saved, only displayed. This can be used as a guide when scanning your finger. When registering or scanning a fingerprint, the user should see their fingerprint on the LCD; they should check the alignment and placement of their finger on the sensor window.
VIRDI 6000 TM Administrator Manual l Be aware of certain fingerprint conditions Depending on the user’s fingerprint condition, some fingerprints may not be used or may cause an inconvenience. Ø If the fingerprint is damaged or very unclear, then it cannot be recognized. Please use a password instead in this case. Ø When a finger is dry, breathe on the finger for smooth operation. Ø For kids, it may be tricky or impossible to use the terminal because their fingerprints are too small or very unclear.
VIRDI 6000 TM Administrator Manual 2. Introduction 2.1. Features l Access control system using LAN - Communication between the unit and the authentication server is done through a UTP cable and TCP/IP protocol, so an existing LAN can be used. This guarantees network-based administration and monitoring as well as easy expansion, high reliability, and higher speed. The AC6000 can work on 10 or 100mb LAN.
VIRDI 6000 TM Administrator Manual window. l Touchless Buttons - The function keys and call button are specially designed for easy operation. The buttons will sense the finger before the finger touches, which does not require the button to be touched. l Customized Look - The main screen can be customized by adding any background (customer logo), and also can be programmed to automatically change everyday at midnight. The time and date can also be moved anywhere on the screen.
VIRDI 6000 TM Administrator Manual FP|PW Fingerprint and password registration Fingerprint or password authentication FP&PW Fingerprint and password registration Password authentication after fingerprint authentication RF Card registration Card authentication RF|FP Card or fingerprint authentication RF&FP Card and fingerprint registration Fingerprint authentication after card authentication RF|PW Card and password registration Card or password authentication RF&PW Card and password registratio
VIRDI 6000 TM Administrator Manual 2.2. Configuration 2.2.1. Network configuration Network Server (authentication server) UTP Switch Hub UTP UTP UTP LET 36 6410 Tx Rx 641 Tx Rx 1 Tx Rx 1 3 Tx Rx 2 Tx Rx 1 2 4 Tx Rx 1 Tx Rx Tx Rx 1 2 1 2 3 2 6423 1 2 2 1 643 8 641 0 2 3 4 5 6 7 8 9 10 11 12 2 2 643 7 3 4 5 6 2 Tx Rx 1 1 2 Tx 3 Rx 2 4 5 7 6 8 9 10 11 12 1 3 4 WAN TCP/IP UTP 2.2.2.
VIRDI 6000 TM Administrator Manual 2.3. Specifications ITEM SPEC CPU 32Bit RISC CPU REMARK 128M DDRAM MEMORY 256M FLASH (Default) 512M FLASH (Option) Fingerprint sensor Optical Authentication speed <1 sec. Scan Area / Resolution 12.9 * 15.2mm / 500 DPI FRR / FAR 0.1% / 0.001% Communication Port TCP/IP, RS-232, Wiegand RS-485 (Option) Temperature / Humidity -10 ~ 50 / Lower than 90% RH LCD 800x480 TFT LCD Display Area 103.8 x 62.
VIRDI 6000 TM Administrator Manual 3. Device configuration settings 3.1. Terminal Setup The terminal should be setup by the administrator prior to using. The terminal configurations allow different setup options for the fingerprint sensor, card reader, add/delete modify users, view log information, set time/date, change languages etc. It is important the administrator setup the terminal to the desired settings before using.
VIRDI 6000 TM Administrator Manual 3.1.2. Administrator Main Screen UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong, Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099, E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.
VIRDI 6000 TM Administrator Manual 3.1.3. Programming Reference Chart This chart is a summary of each programming option available; it will help you quickly locate the option you need to program. Use this chart as a reference.
VIRDI 6000 TM Administrator Manual Terminal Settings User ID Length Terminal ID Number Authentication Method - terminal/server - server/terminal - server only Case Tamper Enable/Disable Language Change Screen Saver Timeout Sound Settings Date/Time Settings Authentication - user ID/Group ID - user display option - 1:N matching - Card only Database control - compress user data - compress log data - clear settings - clear log data - clear picture data - delete all External Devices Fingerprint Sensor - 1:N l
VIRDI 6000 TM Administrator Manual Theme Setup Main window background selection Daily update background Main window icon move Terminal Information System Information Terminal Information Ethernet Information User Capacity Summary Log Data Summary View Log Data USB Operation Import to AC6000 from USB - system options - user data - background images/languages - firmware upgrade Export from AC6000 to USB - User data - Event Log - System Options - Picture Data - All UNION COMMUNITY Co., Ltd.
VIRDI 6000 TM Administrator Manual 3.2. User Management In the user management section you can add, delete, modify or view all users in the terminal. This window will show you how many registered users are in the terminal. Touch the icon to enter the user management area. 3.2.1. Registering a User When registering a user the following steps are necessary. 1) Assign a user ID number for the user.
VIRDI 6000 TM Administrator Manual The following is a step by step guide on registering a user. Touch the icon to register a new user. A window will appear to enter a user ID. This is an identification number that uniquely identifies the user in the system. This window will always show the next available user ID number. Touch to use the current displayed number.
VIRDI 6000 TM Administrator Manual 3.2.1.0. User Registration Window After the OK button is touched a window will be displayed with all the user information. If some options are not programmed for the user they will not show until they are programmed. Status area displays number of fingerprints, cards or if password is enrolled. Authentication type is also displayed. User database picture if picture is taken.
VIRDI 6000 TM Administrator Manual 3.2.1.1. Registering a Fingerprint Touch the finger registration button. You will have 30 seconds to complete this process before the window automatically closes. When registering a fingerprint you are required to enter the finger two times for verification. If more than 5 fingerprints are already registered for a user this icon will not appear, to cancel the process at anytime just touch the fingerprint registration window.
VIRDI 6000 TM Administrator Manual If unsuccessful you can enter your finger again and repeat steps 1-5, or touch the window to finish. 3.2.1.2. Registering a Card Touch the card registration icon. You will have 30 seconds to scan your card to register it before the window automatically closes. Follow the messages that are displayed on the window. If more than 5 cards are registered for the user this icon will not appear. 1) Scan your card 2) Successful card registration.
VIRDI 6000 TM Administrator Manual 3.2.1.3. Registering a Password Touch the password registration icon. When registering a password you must enter a unique 1-8 digit number. You must re-enter the number to confirm the password. After 10 seconds the window will close automatically. 1) Password screen will appear, touch anytime to cancel. 2) Enter your password. 3) Touch OK when finished.
VIRDI 6000 TM Administrator Manual 3.2.1.4. Authentication Type There are up to 11 different ways a user can be authenticated at the terminal, this provides flexibility for users who do not have a card, or have an unreadable fingerprint, or where extra verification is needed for authentication. This depends on the setup by the administrator. The four basic authentication methods are: Fingerprint Card ID Password Combinations of the four basic methods are available.
VIRDI 6000 TM Administrator Manual Touch the auth type icon to select the authentication type for the user. A window with different options will appear. Just touch the appropriate authentication type icon for the user. Touch to cancel and close the window at anytime. After you have touched the appropriate authentication button type the window will close and the authentication type you selected will be displayed in the status area of the user window.
VIRDI 6000 TM Administrator Manual 3.2.1.5. User Fingerprint Options User fingerprint options only apply if a fingerprint has been registered. These options are advanced features, and should only be set if needed. If no fingerprint is registered this icon will not be visible. There are two options available 1) 1:1 Verification Level – this is the ‘security level’ of the registered fingerprint. The higher the number, the higher the security level.
VIRDI 6000 TM Administrator Manual 3.2.1.6. User Picture Registration A user database picture is not required for authentication. It is used for displaying on the LCD when the user is authenticated at the terminal or displaying on the server. It is a quick and easy way to identify the users in the terminal without having to know their ID number. Registering a picture is easy; just touch the camera icon. The picture should show in the center of the user information window.
VIRDI 6000 TM Administrator Manual 3.2.2. Deleting a User The deleting user option will allow you to delete all users or a single user. If you delete a single user you must know the user ID of the user you would like to delete. Touch the icon 1) Touch CANCEL if you only want to delete a single user 2) If CANCEL is touched a user ID entry window will appear. At this time you can enter the user ID number of the user you wish to delete. Touch OK when finished. At anytime touch the X icon to cancel.
VIRDI 6000 TM Administrator Manual 3.2.3. Modifying a User Modifying an existing user requires that you know the user ID of the user you wish to change. You must enter the user ID to change the user settings. Touch the icon to modify an existing user. A window will appear to enter a user ID. Enter the user ID you wish to change.
VIRDI 6000 TM Administrator Manual 3.2.4. Viewing Users The viewing users screen is an interactive screen. There are areas in which you can touch to select to delete users, or select an individual user for modifying. A maximum of six users can be displayed on one window at a time. The areas marked in red are interactive and can be touched for selection. 12 11 10 9 8 7 1 2 6 3 4 5 Number Description 1 Delete Column Title. This area is interactive.
VIRDI 6000 TM Administrator Manual 4 Down Icon. Similar to scrolling forward. Touching this will go forward through the list of users. If you have reached the maximum users this button will not do anything 5 Back Icon. Touch this to exit 6 Card Number Column. If the registered user has a card, the card number will be displayed. 7 Close Icon. Same as #5. Touch this to exit. 8 Password Column. If the registered user has a password, an icon will show. 9 Fingerprint Column.
VIRDI 6000 TM Administrator Manual 3.3. Network Settings The networks settings area allows you to setup IP addresses, gateways, subnet mask, dhcp or static settings. See section 1.1.6. Touchscreen Usage. For static IP usage you must program the Terminal IP, Subnet Mask and Default Gateway. If DHCP is selected, these values cannot be programmed and will be grayed out. The port number must match the port number that is programmed in the Authentication Server.
VIRDI 6000 TM Administrator Manual 3.4. Time/Attendance Settings In the Time & Attendance programming area you can setup the terminal in 1 of 3 Application Modes. The terminal can only operate in one mode. The top status bar will show the current mode of operation and the icon will be highlighted. 3.4.1. Access Control Mode Time schedules are not programmable in this mode.
VIRDI 6000 TM Administrator Manual 3.4.2.1 Time & Attendance Schedules Touch the icon to change the start time, normal time and finish time. For programming the times see section 1.1.6. Touchscreen Usage. Touch the area you wish to change and a number pad will appear for you to enter your data. Touch ‘Done’ to save and finish. For each area enter a time range that best represents that time.
VIRDI 6000 TM Administrator Manual Touch the icon to change to this mode. A time schedule icon will appear. 3.4.3.1 Meal Mode Schedules Touch the icon to change the start time, normal time and finish time. See section 1.1.6. Touchscreen Usage. Touch the area you wish to change and a number pad will appear for you to enter your data. Touch ‘Done’ to save and finish. Each programmable time area is self explanatory. For each area enter a time range that best represents that time.
VIRDI 6000 TM Administrator Manual 3.4.4. Function Key Programming Function Keys can be used for a variety of different applications. They are used to identify the current mode of operation by the user. When using function keys the user is required to touch the function key, then authenticate their fingerprint, card, ID number or password. Function Keys are grouped together as a set of four keys. On the main terminal case there are four function keys.
VIRDI 6000 TM Administrator Manual Touch the icon to change the function key settings. The four function keys on the terminal case are the same four function keys that can be displayed on the LCD. To change options just touch the area. ‘F1, F2, F3, F4 Enabled/Disabled’ – if a check mark appears in the box next to the option the function key is enabled. This also controls the function keys on the terminal case. A function key that is disabled will not produce any action, sound or display on the LCD.
VIRDI 6000 TM Administrator Manual 3.5. Terminal Settings Terminal settings control details about the terminal. In this screen all you need to do is to touch the icon button on the left (system/display/sound/Date/time/Database/Authentication) and a window with the options will appear on the right. Touching the Done button will close and save the changes. The following options are available in this section.
VIRDI 6000 TM Administrator Manual 3.5.1. System Settings Touch the system icon. Then touch the area which you would like to change. 3.5.1.1. User ID Length The user ID length can be 2 to 8 digits in length. It should be programmed as the same value in the server program. The user ID length will be the length of the user ID required to authenticate. Any place that requires the entry of a user ID will be restricted to the length that is programmed in this area.
VIRDI 6000 TM Administrator Manual · Server Only – The authentication is done only at the network server. 3.5.1.4. Case Tamper If this option is enabled and the case tamper on the back of the terminal is ‘opened’ (terminal removed from the wall), an error sound will be heard every 5 seconds when the main window is displayed. During administrator programming this sound does not occur. Also, if a case tamper occurs the status icon for ‘trouble’ will be on. See Icon list for details.
VIRDI 6000 TM Administrator Manual 3.5.3. Sound Settings Touch the Sound icon. Then touch the area which you would like to change. 3.5.3.1. Voice Volume The voice volume controls the volume of the voice prompts in the terminal. This volume is separate from the sound volume. If you do not want any voice prompts put the slider all the way to the left, off. For maximum volume put the slider all the way to the right.
VIRDI 6000 TM Administrator Manual 3.5.4. Date/Time Settings Touch the Date/Time icon. Then touch the area which you would like to change. 3.5.3.2. Display Format The Date/Time Display Format will change the way the date and time is displayed on the main screen.
VIRDI 6000 TM Administrator Manual 3.5.3.2. Set Current Date Touch the current date that is displayed in the edit box, a calendar will appear. Month: You can either; touch the ‘Next Month’ or ‘Previous Month’ arrow icons and scroll to the month you want or you can touch the Month Name and directly select the month you want. Year: Touch the year number and then an arrow up/down icon will appear. Touch the up or down button until the number you want appears.
VIRDI 6000 TM Administrator Manual 3.5.3.3. Set Current Time Touch the area where the time is displayed. A number pad will appear. Enter the time in the format HH:MM: SS. For example current time is 11:14:00pm, enter 2,3,1,4,0,0, and then press OK when finished. If a number is invalid or there is no entry, pressing OK will do nothing. UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong, Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099, E-Mail:sales@unioncomm.co.
VIRDI 6000 TM Administrator Manual 3.5.5. Database Options When any of the options are selected a popup window will show and ask you to confirm what you are about to do. 3.5.5.1. Compress User Data When users are deleted from the system they are marked for deletion in the database, from the server and the terminal. When a new user is added to the system it will not overwrite the users marked for deletion. When you use this option it will delete the marked users in the system and reorder the database.
VIRDI 6000 TM Administrator Manual Database Export. 3.5.5.6. Delete All This option will reset the terminal settings, delete all the picture logs, delete all users and all log information. UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong, Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099, E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.
VIRDI 6000 TM Administrator Manual 3.5.6. Authentication Settings 3.5.6.1. User Group ID If User ID is selected for this option then normal authentication is performed when the user enters their ID number. If Group ID is selected authentication is performed among users with the same first digit and/or less than the user ID number. For example, if the user ID is ‘1234’, the user would enter ‘12’ only for their authentication. The matching is performed with user IDs from 1200 – 1299.
VIRDI 6000 TM Administrator Manual User Display Option = Key ID User Display Option = User Name 3.5.6.3. 1:N Matching When this option is checked, it is possible for the user to authenticate with a fingerprint only. A user ID or card is NOT required. If this option is not checked then 1:1 authentication is performed. The default setting is 1: N Matching. See Glossary of Terms for 1:1 and 1:N.
VIRDI 6000 TM Administrator Manual 3.6. External Devices External Devices settings control details about the devices separated from the terminal (Fingerprint Sensor, Camera, Wiegand IN/OUT, Locking and Door Options). In this screen all you need to do is to touch the icon button on the left (Fingerprint Sensor, Camera, Wiegand, Lock Terminal, Door Options) and a window with the options will appear on the right. Touching the Done button will close and save the changes.
VIRDI 6000 TM Administrator Manual 3.6.1. Fingerprint Sensor Settings 3.6.1.1. 1:N Level This option represents the security level between the captured fingerprint (from the sensor window), and the fingerprints stored in the terminal that are marked for 1:N authentication. This level represents the terminal level, not individual users. Possible values are from 3-9. The default value is 5. The higher the value, the higher the security level, which means more comparisons are done on the fingerprint data.
VIRDI 6000 TM Administrator Manual 3.6.1.4. Enhanced Registration This option allows registration of the same fingerprint. Some applications require registration of the same fingerprint. The default value is off, unchecked. This means the terminal will not allow the same fingerprint to be registered in the terminal. 3.6.2. Camera Settings The terminal has the ability to store a total of 12,500 pictures. These pictures can be either user registered pictures or log data pictures.
VIRDI 6000 TM Administrator Manual 3.6.3. Wiegand Settings Wiegand support is available in the terminal. In the back of the AC6000 there are terminals for Wiegand IN0 and Wiegand IN1, Wiegand OUT0 and Wiegand OUT1. Wiegand Connection Option 1 When using an external reader that supports wiegand you can connect the reader to Wiegand IN0 and Wiegand IN1. This will allow the reader data to be sent to the AC6000 terminal.
VIRDI 6000 TM Administrator Manual 3.6.4. Terminal Locking The purpose of terminal locking is to prevent access to the terminal.. This feature can be used when you do not want any users to access the terminal. No functions on the main window are available, only entering configuration mode is possible. You should have an administrator programmed to allow unlocking and locking. The server program can also lock out the terminal.
VIRDI 6000 TM Administrator Manual 3.6.4.1. Door Monitor This option is a combo selection box; you have three choices, disabled, normal open or normal closed. Select the appropriate value depending on your lock type. 3.6.4.2. Lock Type This option is a combo selection box; the choices are Motor type or strike/auto door type. Select the appropriate value depending on your lock type application. 3.6.4.3. Warn Time The Door Warning Time is programmable from 00-99 seconds. The default value is 20 seconds.
VIRDI 6000 TM Administrator Manual 3.7. Theme Settings The Theme Settings area allows you to customize the look of the main window. You can change the background, move icons or automatically change the background everyday. 3.7.1. Main Background The terminal has 15 preset images to choose from. The image names are background1background15.jpg. The terminal is also capable of importing new images with the USB device. See 3.9.1.
VIRDI 6000 TM Administrator Manual 3.7.3. Arrange Icons If this option is checked (enabled) you will be able to move the time and date icons, ID and Access Icons on the main screen to any location you want. When you are finished arranging your icons on the main screen it is recommended to turn this option off, or else any user can change the location of the images. Turning the option off will ‘lock’ the positions and not allow any movement.
VIRDI 6000 TM Administrator Manual 3.8. Terminal Information In the terminal information section system, event, picture, network information can be viewed here. Nothing is programmable in this section; this section provides the status of the system and a summary of some key settings. Touch the Done icon when finished. 3.8.1. System Information This area provides important information about the terminal. The firmware version, ram usage and harddisk usage is in this area.
VIRDI 6000 TM Administrator Manual 3.8.2. Terminal Information This area provides an overview of the key terminal settings. 3.8.3. Ethernet Information This area provides an overview of the Ethernet settings. UNION COMMUNITY Co., Ltd. 44-3 Hyundai Topics Building, Bangi-dong, Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099, E-Mail:sales@unioncomm.co.kr, http://www.unioncomm.co.
VIRDI 6000 TM Administrator Manual 3.8.4. User Information This area provides an overview about the registered users in the terminal. This will show you the limits for the users, fingerprints and cards and what the current limit is at. This can be helpful in determining how much storage space is remaining for your terminal setup. 3.8.5. Log Data Information This area provides an overview of the log events in the terminal.
VIRDI 6000 TM Administrator Manual 3.8.6. View Log Information This area allows you to view the key log information in the terminal, such as authorized, unauthorized access. If more details are required it is recommended to use the server program. Log Type: This is a combo box, you can select; All, Authorized Access, Unauthorized Access. Event Information: This is a text area that will give you the time/date of the event, user ID, access type and mode.
VIRDI 6000 TM Administrator Manual 3.9. USB Options The USB options area will allow you to import and export files to and from the terminal. User data, log data, pictures, images and firmware upgrading can be performed. It is recommended that your USB have at least 250mbytes available for storage. You cannot select any options in this area until a USB device is connected. The USB device can be connected at anytime before or after entering this area.
VIRDI 6000 TM Administrator Manual In order to import files (System Options, User Data, Theme/Images and firmware upgrading) your USB device should be formatted as follows. Create a directory called ac6000/, then create subdirectories called firmware, languages, and backgrounds. Languages directory – put language files in this folder. If you have a language file AC6000_en_US.qm. (For example English), put it in this directory for importing. A separate program is required to produce the .qm language files.
VIRDI 6000 TM Administrator Manual 3.9.1. Database Import Importing means files will be copied from the USB device to the terminal. User background images, user data, system options and languages can be imported. 3.9.2. Firmware Upgrading If a new firmware version is released from the factory you can update your firmware from the USB device. Make sure you put the binary image in the firmware directory. Do not keep old firmware files in this directory.
VIRDI 6000 TM Administrator Manual 4. How to use the terminal 4.1. Main Screen The appearance of the main screen is highly configurable and can change appearance depending on the setup by the administrator. When no activity has occurred for a programmed number of minutes set by the administrator the LCD will turn off and the display will be blank. When a user approaches the terminal, touches the screen, scans a card, or enters a fingerprint the screen will show again.
VIRDI 6000 TM Administrator Manual 8 Extension Button If more than four functions keys are needed this button is used for extending the number of function keys Below are some different pictures of the main screen when configured with Access Control, Function keys, or Time and Attendance.
VIRDI 6000 TM Administrator Manual 4.2. ID Entry Screen When the ID Button is touched a window will appear for the user to enter their ID number. The user must input their ID number then touch the OK button. If a mistake is made when entering the number touching arrow will erase the number one digit at a time. The window will close after 10 seconds of no activity. • Touch • Touch • Touch button to cancel and close the window. button to backspace to the previous digit entered (erase).
VIRDI 6000 TM Administrator Manual 4.3. Authentication Result Display After a user is authenticated as authorized, unauthorized or not registered a result window will appear with the result and a voice or sound can be heard. The result window may have different icons, pictures or words depending on how the terminal is setup by the administrator. This window will close automatically after a few seconds or can be closed immediately by touching the window area. See below for examples. See 1.1.2.
VIRDI 6000 TM Administrator Manual Here are some examples of different authentication result windows. See the Icon list 1.1.2. List of Icons Unauthorized fingerprint with picture Authorized fingerprint UserID#1 No picture Unregistered card with picture Unregistered card with no picture Unregistered ID with picture Authorized password, userID #3 with picture UNION COMMUNITY Co., Ltd.
VIRDI 6000 TM Administrator Manual 4.4. Application Modes 4.4.1. Access Control Application An Access Control application is normally used for providing access to a secure area, function keys are not needed unless extra tracking of the user is needed. If the system is setup for Access Control and Function keys are used for authentication the user is required to press the mode function button before entering their ID, Card or Fingerprint.
VIRDI 6000 TM Administrator Manual 4.4.2. Time & Attendance Application Time and Attendance Application is for systems that require tracking of employee’s work time. If the system is setup for Time and Attendance, for authentication the user is required to press the mode function key before entering their ID, Card or Fingerprint. Anytime the mode is changed the top status bar will show the current mode. (Attend, Leave, In, Out, Access).
VIRDI 6000 TM Administrator Manual 4.4.3. Cafeteria Application Cafeteria or Meal Application is for systems that require tracking of user’s meal time. If the system is setup for Time and Attendance, for authentication the user is required to press the mode function key before entering their ID, Card or Fingerprint. Anytime the mode is changed the top status bar will show the current mode. (Breakfast, Lunch, Dinner, Snack, Normal). Access Mode – Touch the or the password or fingerprint.
VIRDI 6000 TM Administrator Manual 5. Troubleshooting Guide This is a general guide on troubleshooting. Follow these guidelines if you are having troubles with using the terminal. Problem LCD is blank or black. Cannot hear voices Solution · Ensure the RED power LED is on · Check LCD timeout, LCD will turn off after a programmed period of time. Ensure the voice volume is turned on. See 3.5.3.1. Voice Volume Cannot hear sounds when keys are Ensure the sound volume is turned on. touched See 3.5.3.2.
VIRDI 6000 TM Administrator Manual User not authenticating after registration. Door Not Opening Cannot connect to Server · See section 1.1.7. Correct fingerprint registration and input methods · Ensure the auto sense LED (red led on sensor window) appears when the finger is on the sensor window. · If using the server, make sure the authentication method is correct. See 3.5.1.3. Authentication Mode · Check user authentication type. · Ensure lock is properly connected to terminal.