UBio-X Slim User Guide Version Eng-0.3 Copyright 2000 By Union Community Co., LTD.
UBio-X Slim User Guide Version Date Description 0.1 2019-03-15 Initial Release 0.2 2019-03-25 0.3 2019-04-25 Modify some words Modify the Menu titles according to Terminal’s Menu modes. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code : 05836) Tel : +82-2-6488-3000 , Fax : +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.
UBio-X Slim User Guide 3 Admin, Administrator - A user who can enter into the terminal menu mode, he/she can register/modify/delete terminal users and change the operating environment by changing settings. - If there is no administrator for a terminal, anyone can change the settings. In this regard, it is recommended to register at least one administrator.
UBio-X Slim User Guide Contents .................................................................................................... 2 ................................................................................................................ 3 1. Before use ............................................................................................................. 6 1.1. Safety Precautions ...............................................................................
UBio-X Slim User Guide 5 3.9.3. Search and access your app’s BT module .................................................... 33 3.9.4. Connected app and BT module .................................................................... 33 3.9.5. Disconnect from app and BT module in recognizer ....................................... 34 3.10. Initialize............................................................................................................... 35 4. How to use terminal .......................
UBio-X Slim User Guide 1. Before use 1.1. Safety Precautions Warning Handling with wet hands or allowing liquid to flow into it is prohibited. -> It may cause an electric shock or damage. Do not place a fire source near the terminal. -> It may cause a fire. Do not disassemble, repair, or modify the terminal at discretion. -> It may cause an electric shock, fire or damage. Keep out of reach of children. -> It may cause an accident or damage.
UBio-X Slim User Guide 1.2. Specific names of the terminal Camera Flash Camera Daylighting sensor Touch LCD Card Sensing Area Fingerprint sensor UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code : 05836) Tel : +82-2-6488-3000 , Fax : +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.
UBio-X Slim User Guide 1.3. LCD Display Composition Status Icons Time & Date ID Input Button Menu Button 1.3.
UBio-X Slim User Guide 1.4. Voice and Beep sounds in operation Operation type Voice sound Success to authorize You are authorized Fail to authorize Please try again Waiting for input FP Please place your finger Waiting for input Card Please place your card Touch the ID Input button Please insert your ID 1.4.
UBio-X Slim User Guide 10 Be aware of certain fingerprint conditions Depending on the user’s fingerprint condition, some fingerprints may not be used or may cause an inconvenience. If the fingerprint is damaged or very unclear, then it cannot be recognized. Please use the RF Card instead in this case. When a finger is dry, breathe on the finger for smooth operation. For kids, it may be tricky or impossible to use the terminal because their fingerprints are too small or very unclear.
UBio-X Slim User Guide 2. Product introduction 2.1. Product characteristics Multi-Modal product with which the user can use fingerprint, Card or Password authorization functions together. Built-in Camera Flash can detect the real human face or a picture. Camera Flash can be activated automatically by the Daylighting sensor. Smart Card (13.56MHz) This is Access Control System can be cooperated with Server Database by TCP/IP or Wi-Fi (optional).
UBio-X Slim User Guide 2.2. Product components 2.2.1. Standalone use (Access) DC12V Adapter Electric lock (Lock+, Lock-, Monitor) 2.2.2. Connected with Server (Access, Attendance) TCP/IP TCP/IP TCP/IP Fingerprint authorization server Internet / WAN / LAN TCP/IP TCP/IP TCP/IP UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code : 05836) Tel : +82-2-6488-3000 , Fax : +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.
UBio-X Slim User Guide 2.3. Product specification Types SPEC CPU 1.4GHz Quad Core CPU LCD 4.
UBio-X Slim User Guide 3. Environment setting 3.1. Checks before setting the environment 3.1.1. Entering the menu by Administrator Terminal users include general users and administrators. General users are only allowed to open the door while the administrator can use the Administrator menu to control the door as well as the terminal’s functions. 1. To enter the menu, touch the “MENU” button at the lower of the touch pad. 2. Input the administrator ID and follow the authentication process.
UBio-X Slim User Guide 3.2. Menu composition The Administrator menu has seven submenus as shown below. The following describes each sub menu: 1. User 1. Register 2. Modify 3. Delete 4. List 5. Card Only 2. Auth 1. Normal ▶1:1 Auth Level (Default : 5) ▶1:N Auth Level (Default : 8) ▶Auth Type (Default : Use Identify (1:N Auth)) ▶Auth Order (Default : Terminal Server) 2. TnA ▶TnA Type (Default : Not Use) ▶Auto TnA (Default : Not Use) ▶TnA only (Default : Not Use) 3. Timezone 4.
UBio-X Slim User Guide 3. System 1. Sensor ▶Capture Time Out (Default : 5 seconds) ▶LFD Accuracy (Default : Not Use) ▶Use Camera (Default : Not Use) 2. Card ▶Card Type (Default : Not Use) ▶Wiegand Type (Default : Not Use) ▶Transfer Data (Default : Card Number) ▶Site Code 3.
UBio-X Slim User Guide 4. Network 1. Normal ▶Network Type (Default : Wireline) ▶Terminal ID (Default : 1) ▶Server IP (Default : 192.168.0.2) ▶Port Number (Default : 7332) ▶Encryption (Default : DES) ▶Ping Time (Default : 10 seconds) 2 TCP/IP ▶DHCP (Default : Not Use) ▶IP Address (Default : 192.168.0.3) ▶Subnet mask (Default : 255.255.255.0) ▶Gateway (Default : 192.168.0.1) ▶Main DNS 5. UI 1. Sound ▶Sound Type (Default : Effect Only) ▶Volume (Default : 1) 2.
UBio-X Slim User Guide 3.3. User When you select the [User] at the main menu, the following window appears. Administrator can do register, delete, modify, search for the user by using the ‘User’ menu. 3.3.1. Register The maximum number of users to enroll to the terminal are 200,000 templates for FP users but Card users or PW user can be enrolled up to 500,000 users.
UBio-X Slim User Guide [SAVE] after selecting ‘Auth combination’. 3.3.2. Modify When modifying the registered user from the terminal, ‘Group’, ‘Permission’, ‘FP’, ‘Card’, ‘PW’, ‘Auth combination’ can be modified freely except ‘User ID’ because it is an unique identifying number so that it couldn’t be modified after registration. And also it is possible on Standalone mode which the network type is ‘Not Use’. So you have to modify the registered user from the Server software on Network mode. 1.
UBio-X Slim User Guide 3.3.4. List To query the registered user list from the terminal, select [Menu] [User] [List] in order. 3.3.5. Card Only The model “UBio-X Slim” realizes more convenient to control the door by Card only without using fingerprint or password. The button [Card Only] is used easier to enroll the Card users seamlessly but this feature should be worked under network mode. To enroll the card users seamlessly from the terminal, select [Menu] [User] [Card Only] in order.
UBio-X Slim User Guide This menu is to configure the Authentication option, TnA mode, Timezone and to search the log information. 3.4.1. Normal To set the ‘Verify Level(1:1)’, ‘Identify Level(1:N)’, ‘Auth Type’ and ‘Auth Sequence’ from the terminal, select [Menu] [Auth] [Normal] in order. Verify Level / Identify Level Security Level for FP is adjustable per each Auth Type. For Verify Level(1:1), default is 5 but it can be selected from 1 to 9.
UBio-X Slim User Guide because matching the fingerprint against all user data. However, if you want to be authenticated faster, to use 1:1 is better than to use 1:N even 1:N is more convenient than 1:1. Auth Sequence There are 4 Auth Sequence modes in “UBio-X Slim”. And these are operated with Server software. - Server Terminal : Authentication starts by Server and if it was not searched, authentication will be started by Terminal automatically.
UBio-X Slim User Guide 3.4.3. Timezone If using the feature terminal’s timezone, it is possible to grant to access or deny to access per each period or per each time. But this feature can be used to set the door access on Network mode only. It is possible to set the timezone for each terminal or for each user with selecting the button ’Type’. The time table consists Day and Time as the left picture and it can be checked the terminal’s timezone or a configured user’s timezone.
UBio-X Slim User Guide 3.4.4. Log This is the feature to check the authentication logs for the terminal’s user. 3.5. System Select [Menu] [System] in order from the terminal, the below picture will be shown. This menu is to configure Sensor, Card, Door, Option for Door and check the terminal’s information. UNIONCOMMUNITY Co., Ltd.
UBio-X Slim User Guide 3.5.1. Sensor This menu is used to set the Sensor Mode, Capture Timeout, LFD Accuracy, Sensor Brightness for the fingerprint sensor. And when selecting the terminal basic sensor setting, this setting will be applied to all users who are registered as selecting not individual sensor setting. Capture Timeout This is the standby time for capturing fingerprint and it is adjustable from 3 to 9 seconds.
UBio-X Slim User Guide 3.5.3. Door There are two functions on this menu. one is able to control two doors and the other is able to support the Fire alarm or lighting lamp after connecting each external device. Function It is selectable among ‘Not Use’, ‘Door’, ‘Fire Alarm’, ‘Light Alarm’. Lock Control It is selectable between ‘Normal Close’, ‘Normal Open’ for lock control type. Lock Open Time It can be set the door open time. Door Warn Time It can be set the time for door open too long.
UBio-X Slim User Guide 3.5.5 Option This menu is used to set other terminal options as the left picture. The option ‘Number of Template’ decides the fingerprint count and the option ‘ID Length’ on user enrollment. So all registered users on terminal must be deleted before changing these two options. Number of Template It is selectable between 1 to 2. (Default : 2) ID Length It is selectable from 4 to 20. (Default : 4) Log Save It decides to save the log for authentication result.
UBio-X Slim User Guide 3.6. Network Select [Menu] [Network] in order from the terminal, the below picture will be shown. There are two sub menus ‘Normal’ and ‘TCP/IP’ under [Network] as the left picture. 3.6.1. Normal There are two modes ‘Network mode’ and ‘Standalone mode’ on “UBio-X Slim” model. And the ‘Network mode’ divided by ‘Wireline’ and ‘Wireless’. Type It is selectable among ‘Not Use’, ‘Ethernet’, ‘WIFI’.
UBio-X Slim User Guide It should be inserted for IP address of the Server PC which is installed the Server software. Port Number It should be inserted for the communication port number between server to terminal. Ping Period It decides the polling duration to check the communication status between server to terminal. It is given from 2 to 20. (Default : 10 seconds) 3.6.2. TCP/IP The options on [TCP/IP] should be configured properly to connect to the server after selecting ‘Network mode’.
UBio-X Slim User Guide 3.7. UI Select [Menu] [UI] in order from the terminal, the below picture will be shown. This menu is used to set the terminal display option and sound option as the left picture. And it makes to change freely as customer wants for the terminal’s main display, language, date & time, sound, etc. 3.7.1. Sound This menu is used to set the Sound type about both voice & effect and control its volume. UNIONCOMMUNITY Co., Ltd.
UBio-X Slim User Guide 3.7.2. Display Language Language for terminal can be selected which you want to use. LCD Brightness This is adjustable from 1 to 5 and default is 3. Main Display It is selectable among ‘Analog Clock’, ‘Digital Clock’, ‘Logo Image’. Date & Time Terminal’s data & time is adjustable manually on the Standalone mode. 3.8. USB Select [Menu] [USB] in order from the terminal, the below picture will be shown.
UBio-X Slim User Guide 3.8.1. F/W Update It is possible to update the firmware by using USB memory. When selecting the target file from the firmware file list as left picture, terminal will be rebooted automatically after finishing updating as showing below picture. 3.9. Connect your BT module with your app 3.9.1.
UBio-X Slim User Guide 33 3.9.3. Search and access your app’s BT module If you click Bluetooth search after login the app, BT module information will be searched as shown below. Select the BT module and try to connect. 3.9.4. Connected app and BT module When the app BT module is connected, it will be displayed as the following figure. The app will say “Bluetooth connected” and the BT icon will turn on the recognizer screen as shown below. UNIONCOMMUNITY Co., Ltd.
UBio-X Slim User Guide 34 3.9.5. Disconnect from app and BT module in recognizer If the BT module is connected to the app (the BT icon is displayed in blue), or you briefly touch the BT icon while BT is active, you will see “BT Disconnecting …”Will be Disconnected from the app. UNIONCOMMUNITY Co., Ltd. Addr : 12F, Munjeong Daemyeong Valeon bldg, 127 Beobwon-ro Songpa-gu, Seoul, Korea (zip code : 05836) Tel : +82-2-6488-3000 , Fax : +82-2-6488-3099, E-Mail :sales@unioncomm.co.kr; http://www.unioncomm.co.
UBio-X Slim User Guide 3.10. Initialize Select [Menu] [Initialize] in order from the terminal, the below picture will be shown. This menu is used to set back to the factory format for all terminal’s user data, stored log data and configured options. So please be cautious for these initialization because it is not recoverable. 4. How to use terminal 4.1. How to open the door There are two below methods to open the door with authentication from the terminal basically.
UBio-X Slim User Guide 36 1:N Identification This method is that the registered fingerprint is placed on the fingerprint sensor in the main screen without inserting User ID. But it can take somewhat long time to authenticate because it compares the inserted fingerprint to all fingerprint data in spite of much more convenient then 1:1 Verification. ① Fingerprint Authentication Insert the fingerprint on the fingerprint sensor without inputting User ID. UNIONCOMMUNITY Co., Ltd.
UBio-X Slim User Guide ② 37 Card Authentication Swipe the Card on the Card Sensing Area without inserting User ID. If the User ID should be pressed certainly before inserting fingerprint, please check terminal option ‘Use Identify’ is not selected. ’1:N Identify’ for password user is same to ‘1:1 Verify’. 4.2. How to punch for TnA In TnA mode, user must click function key before authentication. And the log is transferred to server with information which function key is selected.
UBio-X Slim User Guide Simple TnA mode In this mode, the User ID is pressed after pressing Function key and then try to authenticate. The function keys in Simple TnA mode are defined as below. - F1: Attend - F2: Leave If the function key is pressed before authentication, the pressed key “F1” or “F2” will be recorded on the authentication logs so that they are used on Time & Attendance software.
UBio-X Slim User Guide Expand TnA mode In this mode, the Function keys on the bottom side as the left picture. When pressing the function key “Expand”, the User ID is pressed after pressing Function key number which you want up to 63 and then try to authenticate. If you want to use 1:N identification on TnA mode, try to authenticate directly after pressing Function key without inserting User ID. When selecting ‘TnA Only’ to use, the Function key MUST be pressed for authentication. UNIONCOMMUNITY Co.
UBio-X Slim User Guide 40 FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions : (1) This Device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules.
UBio-X Slim User Guide 41 “CAUTION : Exposure to Radio Frequency Radiation. Antenna shall be mounted in such a manner to minimize the potential for human contact during normal operation. The antenna should not be contacted during operation to avoid the possibilityof exceeding the FCC radio frequency exposure limit.