Quick MANUAL Keyless Key (KL-100)
Instruction Manual Precautions for Safety This precaution must be read to protect the users and to prevent any property loss or inconvenience. Please read it carefully for proper use. Do not install or repair this product by yourself. Do not install where the space between the door and the door frame is less than 5mm. Be careful not to expose your PIN code, and please change it regularly. Do not use the product with wet hands.
Identification of Product Out-Body Card Reader - Card authentication Keypad - PIN Code authentication Bluetooth 4.
In-Body DIP S/W Tact S/W A Tact S/W B Battery Fixing Screw Manual lever ● TACT S/W‘A’ / ‘B’ & DIP S/W (On/Off Position) 1. TACT ‘A’ : (Press Long) i-Key Doorlock Registration. (Press Short) Password Change Mode 2. TACT ‘B’ : (Press Long) Card Registraion. (Press short) d-Key Registration & Doorlock Setting. 3.
Using PIN code (Password) Using PIN code to control the door lock PIN code is used for User code and Guest code.
How to Use ① Touch the keypad or the keybox of Out-Body ② Two random numbers and ‘*’ / ‘#’ will appear ③ Press the two numbers regardless of order ④ The keypad will be activated ⑤ Press the registered Guest PIN code and press # (Door will open) (Guest PIN code is valid only for single entry, and will be deleted after use.) Using Card / Key Tag The door lock can be controlled by cards and key tags which has RF function. Maximum of 10 cards or key tags can be registered.
Using Smartphone (d-Key) Controlling the door lock with Smartphone that has Bluetooth function Install Keyless key App on your Smartphone and follow the procedures below to register. Maximum of 10 Smartphones can be registered.
Additional Function Factory Reset Every information will be deleted and turn to default settings, except the Serial Number of the product. ① Open the battery cover ② Press both tact S/W ‘A’ and ‘B’ together for 5 seconds. ③ Alarm will ring and resetting procedure will be proceeded ④ All the functions User has registered will be deleted.
Caution Duration of the battery differs depending on its brand, date of manufacture, and service environment (Four 1.5V AA Alkaline Batteries, assuming that it is used 10 times a day, lasts approximately 10 months.) As fluids may flow from the batteries and damage the product, please check it regularly. ( Every 6 months) Product Specification Item CPU Memory Touch key RF Tag Bluetooth Contents ATSAM4LS4(M4) 2Mbyte 3*4 Key (Capacity type) 13.56Mhz Bluetooth 4.0 [BLE] RF Card. Mobile key.
FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions : (1) This Device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules.
