AC-2200 .USER GUIDE Version kor-1.08 Copyright 2000 By Union Community Co., Ltd.
AC-2200 User Guide 2 Version 1.00 1.01 1.02 1.03 Date 2015-09-01 2015-10-18 2015-12-28 2015-01-18 Description - Initial Release - Form Change - Modify Display - Error Correction - Add Default Setting Firmware Version 10.61.00-000.00 10.61.00-000.02 10.61.00-000.09 1x.61.00-000.12 (Version Change) - Add LFD Setting - Add UDL Setting 1.04 1.05 1.06 1.07 1.
AC-2200 User Guide 3 Administrator (Admin) - The administrator can access to the terminal menu mode. He/she has the authority to add/modify/delete terminal users and to change the operating environment by changing settings. - If there is no registered administrator in the terminal, anybody can access to the terminal menu and change settings. It is recommended that more than one administrator will be necessarily registered in the terminal.
AC-2200 User Guide 4 Table of Contents .................................................................................................................... 2 ............................................................................................................................. 3 Table of Contents ..................................................................................................................... 4 1. Before Getting Started ..............................
AC-2200 User Guide 5 3.5.2. Authentication Method Setting...................................................................... 43 3.5.3. Door Setting .................................................................................................. 47 3.5.4. Volume Setting .............................................................................................. 48 3.5.5. Camera Setting .............................................................................................. 49 3.5.6.
AC-2200 User Guide 6 1. Before Getting Started 1.1. Safety Notes Warning Do not operate the terminal with wet hands, and pay attention not to let any liquid such as water enter inside the terminal. → Otherwise, malfunction or electric shock may be caused. Keep the terminal away from inflammables. → Otherwise, it may cause a fire. Do not disassemble, repair or Do not allow children to remodel the terminal at your touch the terminal carelessly. disposal.
AC-2200 User Guide 1.2. Product Details Union Community / (138-050) 5th Fl., Hyundai Topics Building, 44-3, Bangi-dong, Songpagu, Seoul, Korea // Tel : 82-2-6488-3000 , Fax : 82-2-6488-3099 E-mail: sales@unioncomm.co.kr; http://www.unioncomm.co.
AC-2200 User Guide 8 1.3. Buttons displayed during operation F1 F2 - Switch to ‘Attend’ mode from the default screen. - Used to move up or increase [↑] in the menu mode - Switch to ‘Leave’ mode from the default screen. - Used to move down or decrease [↓] in the menu mode. - Switch to ‘Outdoor’ mode from the default screen. - When pressing for more than 2 seconds, you enter the menu mode: F3 [F3~] - Used to escape [ESC] or move left [] in the menu mode.
AC-2200 User Guide 9 1.5.1. Icon Information ① Fire Detection A fire is detected by the fire detection sensor. ② Door Status The door is open. ③ Server Connection Status The LAN cable is not connected. Only Link is connected. ④ USB Connection The USB is connected. (USB port is service port.) 1.5.2. Message Information - The default screen of AC2200 - The fingerprint is being input or on standby. - When authentication is successful Union Community / (138-050) 5th Fl.
AC-2200 User Guide 10 - When authentication fails - When fingerprint input fails If your finger is released too early before your fingerprint is entered - When an unregistered card is entered When 1:N Authentication is attempted under the condition that authentication priority is SN and there is no user who has been allowed for 1:N Authentication - When anti-passback is in error - When the server cannot handle too many authentication requests from the terminal Union Community / (138-050) 5th Fl.
AC-2200 User Guide 11 - When the terminal is set to the food service control and users attempt more than two times authentication in the same food time zone - When there is no response from the server during authentication attempt When the network is disconnected during authentication attempt to the server - The card input is on standby.
AC-2200 User Guide 12 - - When the terminal is locked When the food service control is set in the non-meal time When the terminal program is upgraded (Do not power off the terminal when this message is displayed.) Union Community / (138-050) 5th Fl., Hyundai Topics Building, 44-3, Bangi-dong, Songpagu, Seoul, Korea // Tel : 82-2-6488-3000 , Fax : 82-2-6488-3099 E-mail: sales@unioncomm.co.kr; http://www.unioncomm.co.
AC-2200 User Guide 13 1.6. Voice guide announced during operation Item Voice Guide When the fingerprint is entered Please enter your fingerprint. When authentication is successful You are authorized. When authentication fails Please try again. 1.7.
AC-2200 User Guide 14 Precautions subject to your fingerprint status The availability of the fingerprint may vary subject to your fingerprint status. This product consists of a fingerprint recognition system and cannot recognize the damaged or unclear fingerprints. They should be registered using a password. If your hands are dry, you can blow your breath on the system to operate it more smoothly. For children, too small or unclear fingerprints may be difficult or impossible to use.
AC-2200 User Guide 15 2. Product Description 2.1. Product Features Access control system using the network (LAN) - The fingerprint reader communicates with the authentication server using a UTP cable and TCP/IP protocol. This terminal can be applied to the existing LAN network and has easy expandability. It ensures a fast speed by 10/100 Mbps Auto Detect and facilitates management and monitoring via the network.
AC-2200 User Guide 16 Various registration and authentication methods There are a total of four registration and authentication methods for general users. Before registering users or administrators, you should determine how to register and authenticate. FP Fingerprint Registration Fingerprint Authentication Card Card Registration Card Authentication M.
AC-2200 User Guide 17 2.2. Configuration Diagram 2.2.1. Standalone Use (Access) DC12V Adapter (Lock+, Lock-, Monitor) All models 2.2.2.
AC-2200 User Guide 18 2.3. Product Specification ITEM SPEC CPU 32Bit RISC CPU(400MHz) REMARKS 128M SDRAM MEMORY 32M NOR FLASH 128M NAND FLASH Fingerprint Sensor Optical Authentication Speed Less than 1 second Scan Area / Resolution 14.8 * 17.9mm / 500 DPI FRR / FAR 0.1% / 0.0001% 5,000/2500 User 5,000/2500 Finger 100,000 Log 10,000 Picture TCP/IP Bluetooth Communication Port RS-485 Wiegand In/Out Temperature / Humidity -20 ~ 50 / Lower than 90% RH LCD 1.
AC-2200 User Guide 19 3. Environment Setting 3.1. Checkpoints before environment setting 3.1.1. Enter the menu When pressing [F3] button for more than 2 seconds, the administrator authentication screen will be displayed. The administrator is verified by either card or fingerprint depending on the authentication method. Upon successful authentication, the screen goes to the following menu.
AC-2200 User Guide 20 ※ The administrator authentication menus is displayed only when there is any registered administrator. Once it is authenticate to enter the menu mode, you can access to all menus until you escape completely from the main menu. 3.1.2. Modify settings Modify the existing settings by pressing [↑][↓] buttons. If the set value is greater than or equal to 2 digits, press [←][→] buttons to move to the digit you want to change, and press [↑][↓] buttons to change the value up or down.
AC-2200 User Guide 21 3.2. Menu Configuration 1. User 1. Add User 2. Delete 3. Modify 4. Add admin 5. Delete All 2. Network 1. Terminal ID :NS/SN/NO/SO 2. Terminal Net 3. Server Net 1. Application 1. Access 2. T&A 3. Cafeteria 3.
AC-2200 User Guide 22 4. Terminal Info 5. Camera
AC-2200 User Guide 23 Max Log Serial Num 5. Ext Function 6. Device The maximum number of the authentication results that can be saved in the terminal Serial number notation 1. Lock Term 2. Read Card 3. Monitor 4. Duress FP 1. System Conf 2. Card Format 3. FP-Sensor <1:1 Level> <1:n Level> 4. Wiegand 5.
AC-2200 User Guide 24 3.3. User Management Select [1.User] on the main menu, and the following screen will appear. Press [↑][↓] buttons to select the menu you want to change, and press [ENT] button. 3.3.1. Add User Select [F3~]→[1.User]→[1.Add User] on the main screen, and the following screen will appear. Enter the ID of the new user you wish to register, and press [F4] button long. When registering, the available user ID is automatically displayed on the LCD so that you can register it conveniently.
AC-2200 User Guide 25 3.3.1.1. Register as “1. FP” Register and authenticate using the fingerprint. Default Setting: ‘4’ This screen is available to determine the authentication level for each user to be registered. By changing this value, the different authentication level may be set for each registered user. If this value is set to ‘1’, the 1:1 Level set in the terminal is used instead of the user-specific authentication level.
AC-2200 User Guide 26 It should be noted that when entering the second fingerprint after entering the first fingerprint, you must release your finger from the fingerprint input window and then enter the second fingerprint again. When the registration is completed, select “Add FP”. If it fails, the screen returns to the “1. User” screen. The followings show LCD prompts that may appear during the registration process.
AC-2200 User Guide 27 3.3.1.4. Register with “FP and Card” The user can be registered using card and fingerprint. Authentication is performed for the card and then for the fingerprint. The user should register his/her fingerprint (see Fingerprint Registration) and then his/her card (see Card Registration). 3.3.2. Delete User Select [F3~]→[1.User]→[2.Delete] on the main screen, and the following screen will appear. Enter the ID of the new user you wish to delete, and press [F4] button long.
AC-2200 User Guide 28 3.3.3. Modify User Select [F3~]→[1.User]→[3.Modify] on the main screen, and the following screen will appear. Enter the ID of the user you wish to change, and press [ENT] button long. Both general users and administrators can be changed without distinction. If the ID of an unregistered user (or administrator) is entered, the message of “Unregister” with “Fail” buzzer is displayed on the LCD and then the screen goes to the “1. User” menu.
AC-2200 User Guide 29 To modify, select the authentication methods referring to the aforementioned process of [3.3.1.1] to [3.3.1.4]. [2] When selecting “1:1 Level” Recommended Setting: ‘4’ To modify, the new set value should be entered. [3] When selecting “Add FP” Enter your fingerprint referring to “1.8. How to register and enter the fingerprint” as aforesaid. When the fingerprint sensor lights on, place your finger on the fingerprint input window.
AC-2200 User Guide 30 The followings show LCD prompts that may appear during the registration process.
AC-2200 User Guide 31 3.3.4. Add Administrator Select [F3~]→[1.User]→[4.Add Admin] on the main screen, and the following screen will appear. Enter the ID of the administrator you wish to register, and press [F4] button long. ※ Since then, the administrator registration process is same as the general user registration process.
AC-2200 User Guide 32 3.4. Network Setting Select [2.Network] on the main menu, and the following screen will appear. Press [↑][↓] buttons to select the menu you want to change, and press [ENT] button. 3.4.1. Terminal ID Select [F3~]→[2.Network] → [1.Terminal ID] on the main screen, and the following screen will appear. 3.4.1.1. Terminal ID This ID is a unique ID used to allow the server to identify the terminal. The default is ‘00000001’.
AC-2200 User Guide 33 This menu is to determine the authentication priority between the terminal and the network, the default is ‘2. SN’, and the authentication method in each mode operates as follows. NS If the terminal is connected to the server, authentication is attempted from the server. If the terminal is disconnected from the server due to a network failure, etc., authentication is attempted from the terminal.
AC-2200 User Guide 34 3.4.2. IP Setting Select [F3~]→[2.Network] → [2.Terminal Net] on the main screen, and the following screen will appear. 3.4.2.1. Connection Method Setting Select [1] if Static IP is assigned, and select [2] to set IP using DHCP. Default Setting: ‘1.Static’ This refers to how the terminal is connected to the network. The default is ‘1’ (Static).
AC-2200 User Guide 35 3.4.2.3. Subnet Mask Setting Press [←][→] buttons to move to the digit you want to change, and press [↑][↓] buttons to change the numbers. Default Setting: “255.255.255.000” This is to set the subnet mask of the network connected to the terminal. After entering correctly, press [F4] button long to move to the next setting. 3.4.2.4. Gateway Setting Press [←][→] buttons to move to the digit you want to change, and press [↑][↓] buttons to change the numbers. Default Setting: “192.168.
AC-2200 User Guide 36 3.4.3.1. Connection Method Setting Select [1] if Static IP is assigned, and select [2] to set IP using DDNS. Default Setting: ‘1.Static’ This is the way that the terminal is connected to the network. Select [1] when using the Static IP assigned from the connected network, and select [2] when using the IP assigned from the DDNS server. After entering correctly, press [ENT] button to move to the next setting.
AC-2200 User Guide 37 3.4.3.3. Sever Port Setting Press [←][→] buttons to move to the digit you want to change, and press [↑][↓] buttons to change the numbers. Default Setting: “09870” This is to specify the Port of the network server connected to the terminal. After entering correctly, press [F4] button long, and the screen will go to the upper menu. 3.4.3.4. DDNS ID Setting Press [←][→] buttons to move to the digit you want to change, and press [↑][↓] buttons to change the numbers.
AC-2200 User Guide 38 3.4.3.5. DDNS IP Setting Press [←][→] buttons to move to the digit you want to change, and press [↑][↓] buttons to change the numbers. Default Setting: “210.116.104.058” This is to specify the IP Address of the network server connected to the terminal. After entering correctly, press [F4] button long to move to the next setting. 3.4.3.6. DDNS Port Setting Press [←][→] buttons to move to the digit you want to change, and press [↑][↓] buttons to change the numbers.
AC-2200 User Guide 39 3.5. Option Setting Select [3.Option] on the main menu, and the following screen will appear. Press [↑][↓] buttons to select the menu you want to change, and press [ENT] button. 3.5.1. Application Setting Select [F3~] → [3.Option] → [1. Application] on the main screen, and the following screen will appear. Set the operating mode that you want to set. Default Setting: ‘1.Access’ This is to set an operating mode of the terminal.
AC-2200 User Guide 40 3.5.1.1. When setting to “[1.Access]” or “[2.T&A]” By setting the default time for each T&A mode, after authentication, the terminal display mode can be turned into the automatically set T&A mode. If time setting is unnecessary, it is set to ‘00:00-00:00’. This is to set the default attendance time. Press [←][→] buttons to move to the digit you want to change, and press [↑][↓] buttons to change the numbers.
AC-2200 User Guide 41 Subsequently, press [ENT] button, and the following screen will appear. Default Setting: All ‘V’ Set whether to use each function key. When setting to ‘V’, it means that the authentication mode may be changed when pressing the function key. When setting to Blank, the authentication mode is not changed in spite of pressing the key. When this mode is used only for Attend or Leave, it is available by unchecking other function keys.
AC-2200 User Guide 42 When is set, the menu to check whether to duplicate appears as shown below. Default Setting: ‘2.No’ If the mode is set to ‘No’, authentication is once allowed within the same meal time zone. When attempting authentication again, the “Duplicated!” message is displayed and the authentication fails. Subsequently, press [ENT] button, and the following screen will appear. Default Setting: ‘2.No’ At least five authentication modes may be set if necessary.
AC-2200 User Guide 43 Set whether to use each function key. When setting to ‘V’, it means that the authentication mode may be changed when pressing the function key. When setting to Blank, the authentication mode is not changed in spite of pressing the key. When this mode is used only for Attend or Leave, it is available by unchecking other function keys. After selecting the set value, press [ENT] button, and all authentication settings will be finished and the screen will move to the upper menu. 3.5.2.
AC-2200 User Guide 44 3.5.2.2. Set whether to permit authentication using card only Default Setting: ‘2.No’ This option makes it possible to authenticate using card only without fingerprint. Even if the user is registered in FP and Card, he/she can be authenticated using card only in the terminal that this option is set to ‘1’. After selecting the set value, press [ENT] button, and the screen will go to the upper menu. 3.5.2.3.
AC-2200 User Guide 45 3.5.2.4. Blocking Time Setting Default Setting: 00000 (Unit: Second) This option is to prohibit the user from re-authenticating within the set time. There is no limit when the mode is set to '0'. However, if it is set to the greater value than ‘0’, re-authentication cannot be permitted until the time lapses more than the set time after successful authentication. After selecting the set value, press [ENT] button, and the screen will go to the upper menu. 3.5.2.5.
AC-2200 User Guide 46 3.5.2.6. NetErr TimeOut – Network Error Time Setting (Second) Default Setting: ‘05’ In the server authentication mode, if the network error time is set, the time to wait for authentication can be set. For example, if the error time is set to 5 seconds, when the user does not receive any response from the server for 5 seconds after authentication request, an error message comes out. (However, the user is processed as authentication failure.
AC-2200 User Guide 47 3.5.3. Door Setting Select [F3~] → [3.Option] → [3.Doorlock] on the main screen, and the following screen will appear. 3.5.3.1. Lock Type Setting Set to ‘1’ when the terminal is connected to the strike type or automatic door, and ‘2’ when it is connected to the motor lock. Default Setting: ‘1.Strike’ Set to ‘1’ even if the door lock is not connected. Set to ‘3’ if the lamp for displaying authentication success/failure is installed the lock port.
AC-2200 User Guide 48 3.5.3.3. Door Open Alarm Setting Default Setting: ‘00’ This option allows the terminal to check the time when the door is open. If the door is open over the set time (minimum 5 seconds to maximum 30 seconds), an alarm occurs. When the time is set to ‘00’, no alarm occurs. Even if the time is set to 01~04, an alarm starts to sound after the lapse of at least 5 seconds. The door must be closed within the set time. But, it may not be closed due to unforeseen circumstances.
AC-2200 User Guide 49 3.5.4.2. Buzzer Volume Setting Default Setting: ‘3’ This option is to set the terminal buzzer volume. The buzzer occurs silent for ‘0’, small volume for ‘1’, and large volume for ‘3’. Press [ENT] button to move to the next setting. 3.5.4.3. Case Open Alarm Setting Default Setting: ‘1.Yes’ This option is to set whether an alarm occurs when the terminal case is open. The alarm occurs for ‘1’ and it does not occur not for ‘2’.
AC-2200 User Guide 50 This menu is to set whether to use the camera. Default Setting: ‘1.Yes’ After selecting the set value, press [ENT] button, and the screen will go to the upper menu. 3.5.6. Current Time Setting Select [F3~]→[3.User]→[6.Time] on the main screen, and the following screen will appear. 3.5.6.1. Time Synchronization Setting Default Setting: ‘1.Auto’ This option is to set how to synchronize the current time of the terminal with the server time. Set to ‘1.
AC-2200 User Guide 51 3.5.6.3. Current Time Setting The current time of the terminal is displayed in the order of "2009:Year, 08:Month, 01:Day, 21:Hour, 18:Min, 06:Sec". To modify, move to the desired position using [←][→] buttons, and modify the existing values using [↑][↓] buttons. Press [ENT] button to move to the next setting. 3.5.6.4. Time Display Setting Default Setting: ‘2.05:00 PM’ This option is how to display the current time of the terminal.
AC-2200 User Guide 52 3.5.7.1. RS485 Set This option is to set RS485 ID so that the terminal can interlocks with RS485 equipment. Press [↑][↓] buttons to select the ID value, and press [ENT] button. Default Setting: ‘0’ After selecting the set value, press [ENT] button, and the screen will go to the upper menu. 3.5.8. Mobile Key Setting Select [F3~]→[3.Option] → [8.M.Key Set] on the main screen, and the following screen will appear. 3.5.8.1.
AC-2200 User Guide 53 When selecting ‘1.Yes’, the screen for interlocking with the administrator app via Bluetooth is displayed. After interlocking with the administrator app (UNIS-B Plus), the setting and authentication mode via the terminal cannot be used. the setting mode is available in administrator app (UNISB Plus). The detail setting complies with the administrator app (UNIS-B Plus) manual. Press [ENT] button to move to the next setting. 3.5.8.3. Bluetooth Name Setting When selecting ‘2.
AC-2200 User Guide Net Type Terminal IP Gateway Subnet Mask Server Type Server IP Server Port MAC Addr Card Ver Card Format All User All Admin Max User All FP Max FP All Log Max Log Serial Num 54 Network connection methods (Static IP/DHCP) Terminal IP address Terminal gateway address Terminal subnet mask address Network server connection mode setting IP address of the network server connected to the terminal Port number of the network server program Terminal MAC address Card reader module firmware versio
AC-2200 User Guide 55 Default Setting: ‘2’ (Unlock Terminal) This function allows the administrator to directly lock or unlock the terminal without the server program. If it is set to ‘1’, nobody can access the office until the administrator releases the set. After selecting the set value, press [ENT] button, and the screen will go to the upper menu. 3.7.2. Card Number Inquiry Select [F3~]→[5.Ext Function]→[2.Read Card] on the main screen, and the following screen will appear.
AC-2200 User Guide 56 3.7.3.1. Monitor 1 Input Port Setting Set when connecting an external contact to DM0. (When using a motor lock, set to 1 or 2.) Default Setting: ‘0.None’ - ‘0.None’: When nothing is connected ‘1.NO’ or ‘2.NC’: When the open door status monitoring pin is connected ‘3.Fire NO’ or ‘4.Fire NC’: When the fire detection sensor is connected ‘5.Panic NO’ or ‘6.Panic NC’: When the panic situation detection sensor is connected ‘7.EMC NO’ or ‘8.
AC-2200 User Guide 57 3.7.4. Duress FP Setting Select [F3~]→[5.Ext Function]→[4.Duress FP] on the main screen, and the following screen will appear. 3.7.4.1 Duress FP This function allows users to use an alarm when the duress fingerprint is entered. Set whether to use the duress fingerprint alarm. Default Setting: ‘2.No’ The default setting is '2.No'. When it is set to ‘1.Yes’, if the pre-registered fingerprint is authenticated, the voltage of 12V will flow into ‘L2’ Pin.
AC-2200 User Guide 58 3.8. Device Setting Select [6.Device] on the main menu, and the following screen will appear. Press [↑][↓] buttons to select the menu you want to change, and press [ENT] button. Most of device settings are the option that does not need to change after installation. It is recommended that they are not changed unless there is any clear purpose. 3.8.1. System Configuration Select [F3~] → [6.Device] → [1. System Conf] on the main screen, and the following screen will appear. 3.8.1.1.
AC-2200 User Guide 59 3.8.1.2. Language Setting Default Setting: ‘0.English’ If the language setting is changed, the voice message and the message on the LCD are changed into the set language. 3.8.2. Card Reader Format Setting Select [F3~] → [6.Device] → [2. Card Format] on the main screen, and the following screen will appear. Default Setting: ‘0.Default’ This option is to specify the format that displays the read card number. When setting to Hexa, the format is displayed to the hexadecimal number.
AC-2200 User Guide 60 3.8.3.1. 1:1 Level Setting Default Setting: ‘4’ This option is to set the match degree with the same fingerprint when comparing the fingerprint on the fingerprint input window with the user fingerprint saved in the database. The higher authentication level may ensure the higher security. But it requires the relatively high concordance rate. When authenticating User ID, it high likely to deny authentication.
AC-2200 User Guide 61 3.8.3.3. LFD Setting Default Setting: ‘1.None’ This option is to set the LFD level that can prevent imitation fingerprints from entering. The higher LFD level may ensure the higher function that prevents the input of imitation fingerprints made of rubber, paper, film, and silicon. However, too dry fingerprints may not be entered even when entering actual fingerprints. After selecting the set value, press [ENT] button, and the screen will go to the upper menu. 3.8.3.4.
AC-2200 User Guide 62 Default Setting: ‘1’ This option is used only when the terminal is equipped with a separate controller operated by Wiegand input. After authentication, the following types of data are sent to the Wiegand port of the terminal. 1.None General case. The Wiegand Out port is not used. 2.26bit “Sitecode [1 byte] + User ID [2 bytes]” are transferred. User ID should be set to the 4-digit or less number. Example) SiteCode:045, UID:6543 → 1 00101101 0001 1001 10001111 0 3.
AC-2200 User Guide 63 Default Setting: ‘2.No’ This option is available when the Wiegand card reader is used. When the mode is set to [1], the card information entering to ‘Wiegand In’ is bypassed to ‘Wiegand Out’. 3.8.5. Terminal Initialization Select [F3~] → [6.Device] → [5.Initialize] on the main screen, and the following screen will appear. Select [1] to initialize the set value; [2] to initialize the authentication records; [3] to initialize the factory; and [4] to use the UDL. 3.8.5.1.
AC-2200 User Guide 64 3.8.5.2. Authentication Records Initialization Select [1] to initialize, and [2] to cancel. This option deletes all authentication related logs except for set values and users. When initialization is successfully completed, the “Ppiririck” beep occurs and the screen moves to the upper menu. 3.8.5.3. Factory Initialization Select [1] to initialize, and [2] to cancel.
AC-2200 User Guide 65 DB Backup Menu. Export Log (USB port is service port.) - Used when the log data saved in the AC2200 terminal is exported to USB. - Data is saved with a file name of LOG.DAT in the place of “USB top-level folder → AC2200 folder → 00000000 (8-digit terminal ID) folder → LOG folder”. - Only log data can be saved, except for photos. Export User (USB port is service port.) - Used when the user data saved in the AC2200 terminal is exported to USB.
AC-2200 User Guide 66 Default Setting: ‘1.None’ This option is available when connecting the Slave Reader using the card or fingerprint to the terminal in order to use as a secondary authentication device. The mode is set to ‘2’ when connecting the Wiegand card reader, and ‘3’ when connecting the SR100. Press [ENT] button to move to the next setting. Default Setting: ‘2.No’ When setting to ‘1.Yes’, the Anti-Passback in the terminal is checked.
AC-2200 User Guide 67 Press [ENT] button to move to the next setting. Default Setting: ‘1.None’ This screen is displayed only when is not set to ‘3’. When connecting an external device of LC010 to the terminal, the mode is set to ‘2.Lock Ctrl’. When the terminal interlocks with MCP040, RS485 ID must be set. Union Community / (138-050) 5th Fl., Hyundai Topics Building, 44-3, Bangi-dong, Songpagu, Seoul, Korea // Tel : 82-2-6488-3000 , Fax : 82-2-6488-3099 E-mail: sales@unioncomm.co.
AC-2200 User Guide 68 4. How to Use Terminal 4.1. When operating to [1.Access] - Set to Menu → 3.Option → 1. Application → [1.Access]. 4.1.1. Authentication Mode - Press function keys, change to the desired authentication mode such as F1, F2, F3, F4, and then perform authentication. When perform authentication without pressing function keys specially, the mode is automatically authenticated to the access mode.
AC-2200 User Guide 69 Place your finger on the fingerprint sensor, and the red light is on the fingerprint input window. Keep your finger until the red light is off with a beep sound. ▼ If your fingerprint is successfully authenticated, the voice message of “You are authorized” comes out and a success message is displayed on the LCD. ※Error Message: The following messages will appear with the voice message of “Place Same FP”.
AC-2200 User Guide 70 Press [F2] key to change the authentication mode to Leave. ▼ If your fingerprint is successfully authenticated, the voice message of “You are authorized” comes out and a success message is displayed on the LCD. Error Message: The following messages will appear with the voice message of “Place Same FP”.
AC-2200 User Guide 71 When the lamp is on the fingerprint input window with the voice message of “Place Same FP”, enter your fingerprint and keep your finger until the “beep” sound occurs. 4.2. When operating to [2.T&A] - Set to Menu → 3.Option → 1. Application → [2.T&A].
AC-2200 User Guide 72 - When the mode is set to the food service control, the terminal is locked in the time other than meal times. The meal time must be set to more than one meal per person.
AC-2200 User Guide 73 FCC Information This device complies with part 15 of the FCC Results. Operation is subject to the following two conditions : (1) This Device may not cause harmful interface, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules.