Maintenance Manual PZ-series Portable Radio PZ-400, PZ-100
Maintenance Manual TABLE OF CONTENTS SPECIFICATIONS ................................................................................................................................................. 4 MODEL: PZ-100NW ...................................................................................................................................... 4 MODEL: PZ-400NW ......................................................................................................................................
Maintenance Manual Monitor .......................................................................................................................................................... 16 Dual PTT (Home Channel) mode .................................................................................................................. 16 Subtone ..........................................................................................................................................................
Maintenance Manual SPECIFICATIONS MODEL: PZ-100 GENERAL Dimensions(Less Antenna) H x W x D Weight Radio (less battery) with battery (2600mAH) Programmable Channels Channel Spacing Power Source Current Drain (maximum) Receive Standby mode Receive Full Audio Transmit at 5 Watts 112.2 × 56mm × 31.9 mm 16 Channels 12.5 / 25 kHz 7.5V DC Rechargeable Li-ion 2600 mAH battery pack 60 mA 350 mA 1.
Maintenance Manual MODEL: PZ-400 GENERAL Dimensions(Less Antenna) H x W x D Weight Radio (less battery) with battery (2600mAH) Programmable Channels Channel Spacing Power Source Current Drain (maximum) Receive Standby mode Receive Full Audio Transmit at 5 Watts 112.2 × 56mm × 31.9 mm 512 Channels 12.5 / 25 kHz 7.5V DC Rechargeable Li-ion 2600 mAH battery pack 60 mA 350 mA 1.
Maintenance Manual MODEL NUMBER To identify the model number of PZ-series Radio is as followings PZ – 400 Identification number of radio Frequency Band manufactured by UNIMO Model Number Description PZ - 100 PZ - 400 Frequency band: 136 – 174 Mhz, Frequency band: 400 – 470 Mhz, PZ-SERIES RADIO PACKAGE NUMBERS Package Number Description PZ10XXXE PZ10GXXE PZ10XBXE PZ10GBXE 136 – 174Mhz PZ series radio 136 – 174Mhz PZ series radio with GPS 136 – 174Mhz PZ series radio with Bluetooth 136 – 174Mhz
Maintenance Manual FEATURES PZ-series radio is designed for a rugged, lightweight and it can be provided for powerful sound and for better performance of conversation distance & sound quality. The new PZ-series radio provides reliable service in the industrial fields and public places for the safety & convenience of users. The PZ-series radio is offered with several packages available with respect to the options (GPS function, Bluetooth fuction).
Maintenance Manual CONTROLS & INDICATORS The following section provides a description of the controls and Indicators for the PZ-series radio. Detailed operating instructions can be found the later chapter. Controls On/Off Volume Switch Turn the knob of Volume Switch clockwise to turn the Radio on and if turning the Switch to the opposite direction, the Radio is turned off.
Maintenance Manual Channel Select Switch Turn the knob of Channel Select Switch clockwise to increase the channel number and if turning the switch to the opposite direction then decrease the channel number. The channel numbers are preprogrammed using by PC program. The channel selections also can be changed by up and down buttons on front side of the radio. PTT Button The radio is converted to transmission mode and transmitting the RF power by pressing and holding the PTT button on the side of the radio.
Maintenance Manual Indicators Status Indication LED The users can be recognized the current status of PZ-series radio by the color of LED. The status indication will be as followings. When the transmitting status is normal, the red LED will be ON. When the receiving status is normal, the green LED will be on. When the CTCSS tone or DCS code is not being received due to mismatch, the green LED will be blinked.
Maintenance Manual ⑥ ⑦ ⑧ ⑨ Compander mode indicator is ON when the compander function is activated. Radio generates a several kinds of alert tones when the alert tone function is activated. This indicator is OFF when this function is deactivated. Lock indicator is ON when the radio is locked. Battery capacity indicator. All the indicators are ON when the battery is full charged. After in use the battery capacity indicator inner the box is OFF one by one.
Maintenance Manual of the radio. Hold the radio and battery pack with the back of them facing you. See Figure Align the hook back of the radio with the hook front side of the battery pack Press and slide the battery pack fully upper side of the radio until the battery release latch click into place. Removing the Bttery Pack Ensure the ON/OFF volume switch is set to OFF position of the radio. Press down the release latch and slide the battery pack down side of the radio.
Maintenance Manual After complete charging Error condition During maintaining charge ☞ CAUTION green LED is turn ON red LED is blinks green LED is turn ON Charger used with battery packs must be supplied by UNIMO Technology Co., Ltd. Charging the battery on the other manufacturer’s can cause unexpected damage of the battery and the radio RADIO OPERATIONS Installation and Removal of Antenna The Figure shows the installation and removal method of antenna.
Maintenance Manual ☞ CAUTION` If transmitting consecutively for more than a certain time when setting of BCLO function and TOT function, the transmission can be forcibly interrupted for other users. Receiving The radio operates as a receiving standby mode except for the transmitting period. User can adjust the volume by using the volume switch. The green LED is turn ON when the radio receives the RF signal and can heard the transmitting voice.
Maintenance Manual A scan channel list must be created before SCAN can be used. The radio will not go into SCAN mode where no scan channels are programmed. The scan channel list can be established in PC program of Menu mode. Normal Scan Once SCAN is activated, the radio will perform a normal scan mode. When the scan channel list is NS1, NS2 and NS3 on the normal scan mode, the radio proceeds to scan in the sequence of NS1, NS2, NS3, NS1, NS2, NS3....
Maintenance Manual transmitting the emergency alert tone periodically. This function can be performed when SCAN is activated. VOX The VOX function is set up by Pc-Programmer and without pressing the PTT key, the voice signal is transmitted through microphone. Monitor In order to open the squelch compulsorily, press the MON key. If pressing the MON key for more than 2 seconds, the squelch is opened continuously with a “beep” sound.
Maintenance Manual 2 3 4 5 6 7 8 9 10 11 12 13 14 71.9 74.4 77.0 79.7 82.5 85.4 88.5 91.5 94.8 97.4 100.0 103.5 107.2 16 17 18 19 20 21 22 23 24 25 26 27 28 114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2 151.4 156.7 162.2 167.9 173.8 30 31 32 33 34 35 36 37 38 39 40 41 42 186.2 192.8 203.5 210.7 218.1 225.7 233.6 241.8 250.3 69.3 159.8 183.5 189.9 44 45 46 47 48 49 50 51 52 53 199.5 206.5 229.1 254.1 165.5 171.3 177.3 60.7 62.5 64.
Maintenance Manual 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 043 047 051 054 065 071 072 073 074 114 115 116 125 131 132 134 143 152 155 156 162 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 226 243 244 245 251 261 263 265 271 306 311 315 331 343 346 351 364 365 371 411 412 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 464 465 466 503 506 516 532 546 565 606 612 624 627 631 632 654 662 664 703 712 723 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 1
Maintenance Manual programmed for 30 different IDs and names using by PC programmer. The radio enters Call mode when pressing the “F3” and “F1” button simultaneously during the standby mode. The radio returns the standby mode when pressing the “F4” button. When the Call mode is activated then call IDs are displayed on the LCD and change next IDs using by channel select switch. Individual Call Enters the Call mode using by press the “F3” and “F1” buttons simultaneously.
Maintenance Manual Compander The compander function is used for improving the voice quality. When transmitting, it transmits compressed voice and when receiving, it expands the compressed voice, which is for improvement of communication quality. Scramble The scramble function is used to protect the radio from overhearing of the other radio that is used same frequency. The scramble can be activated by Menu mode. Although the power is turned off and on, this function is maintained.
Maintenance Manual Key Lock Pressing and holding the “F4” buttons over 2 seconds then Key Lock is activated when the radio is standby mode. And the indicator Icon is ON. Up/Down and Menu buttons doesn’t operate during this function is activated. Key Lock function can be deactivated, pressing the “F4” buttons once more when the Key Lock is activated. Cloning Function The personality data of radio such as frequency/Tone/Scan can be copied to other radio directly using by cloning function.
Acknowledging Special Precautions and the FCC Notice Cautions. Modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC compliance Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received. Including interference that may cause undesired operation.
RADIO FREQUENCY ENERGY SAFETY INFORMATION This UNIMO transceiver has been tested and complies with the standards listed below, in regards to radio Frequency(RF) energy electromagnetic energy(EME) generated by the transceiver > FCC RF exposure limits for Occupational use only. RF exposure limits adopted by the FCC are generally based on recommendations from the national council on radiation protection and measurement, & the American National National Standards Institute.
> Do not transmit for more than 50% of the total transceiver use time; transmitting over 50% of the total use time may exceed the limits in accordance to the FCC RF exposure requirements. Nominal transceiver operation is 5% transmission time,5% reception time, and 90% stand-by time > Use only the specified antenna for this transceiver; this may be either the antenna provided with the transceiver or another antenna authorized by UNIMO.
IMPORTANT Safety Instruction: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this equipment near water. 6) Do not using near any heat sources such as radiators, heat resisters, stove, or other equipment that produce heat.
European Union Regulatory Notice Compliance with these directives implies conformity to harmonized European standards (European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product family. This compliance is indicated by the following conformity marking placed on the product. CE RF Radiation Exposure Statement: Caution This equipment complies with European RF radiation exposure limits set forth for an uncontrolled environment.