SR3 INSTALLTION GUIDE & USER’S MANUAL UniKey’s Bluetooth Smart Reader
SR3 Installation Guide & User Manual Table of Contents SR3 Overview ........................................................................................................................ 2 SR3 Installation Guide ........................................................................................................... 3 Introduction ....................................................................................................................................... 3 Grounding...........................
SR3 Installation Guide & User Manual SR3 Overview The UniKey SR3 (Product Number SR3-UK-0001) is a 125kHz Prox and Bluetooth Low Energy allin-one commercial reader for access control systems. The reader can retrofit legacy PACS systems using proximity, otherwise known as prox and easily implement optional features such as Touch-To-Open® and Inside/Outside Intelligence™ for an enhanced user experience at the door.
SR3 Installation Guide & User Manual SR3 Installation Guide Introduction This section will walk a professional installer through the steps needed to attach a UniKey Smart Reader 3 (or SR3) (SR3-UK-0001) to an access control panel. The SR3 supports 125 KHz prox cards as well as UniKey mobile credentials. Please review the information below to ensure the reader is installed quickly and properly. Grounding • • Shield must run continuously from the reader to the panel.
SR3 Installation Guide & User Manual Mounting the Reader • • • If the unit is used to control a door or pedestrian gate, locate the unit as near as practical to the entry point. If the unit is mounted on or in a wall adjacent to the entry point, be sure the wall is sturdy. The repeated shock and vibration from a slamming access door or spring- loaded pedestrian gate must be isolated from the unit. Never mount the reader directly on a moving door or gate.
SR3 Installation Guide & User Manual Prox Weigand Format • • • • Modulation technique: ASK or FSK modulated proximity cards or fobs. PSK is not supported. Output Weigand format: 26 to 37-bit. o Note 26 bit verified by UL Frequency: 125 KHz RFID The control system can distinguish between the type of credential used. How this is done depends on the access control system being used.
SR3 Installation Guide & User Manual Reader Enrollment Once the SR3 has been properly installed. It must then be enrolled to an organization using a mobile device using UniKey Mobile App and an installer credential to log in. • • • First Select the Organization in the UniKey Mobile App and tap the + button to enroll a reader to the organization Then name the reader and tap Next Last touch the mobile device to the newly named reader AN1031 V1.0 Copyright ©2019 UniKey Technologies. All rights reserved.
SR3 Installation Guide & User Manual SR3 Animations Each animation corresponds with a specific response from the SR3 and can be customized individually for the user’s commercial organization. Other animation colors as well as various presentation styles are just some of the alternatives available for the UniKey SR3. Blue Idle: The reader is properly enrolled and is idly waiting for an access attempt. Amber Idle: The reader is connected to power but not enrolled to an organization.
SR3 Installation Guide & User Manual SR3 Reset A reset is performed in order to clear the reader of existing organizations and corresponding end user credentials. Access to any specified organization will need to be re-established before continuing reader use. 1. To locate the reset button on the reader, dismount from the installation points. The reset button is located on the back of the reader, as depicted in Figure 1. 2.
SR3 Installation Guide & User Manual SR3 Factory Reset A factory reset is performed in order to clear the reader of existing organizations and corresponding end-user credentials, as well as to clear any firmware updates initiated on the reader since manufactured. Access to any specified organization will need to be re-established, and firmware will need to be reinstalled to the latest version before using the reader. 1. To locate the reset button on the reader, dismount from the installation points.
SR3 Installation Guide & User Manual Identifying SR3 Firmware Version The firmware versions for the SR3 can be identified once the SR3 is enrolled to an organization. Via the Web Portal To identify the firmware version for the SR3 in the UniKey web portal. Once logged into the UniKey web portal using an installer credential. Select the Actions menu for the Organization and click on View Readers to see the screen shot.
SR3 Installation Guide & User Manual UniKey Mobile Credentials This section provides an overview of commercial mobile credentials within the UniKey platform. The various actors in a typical deployment will be defined as well as a review of the typical lifecycle of the mobile credential.
SR3 Installation Guide & User Manual When a customer submits a purchase order to UniKey to procure redemption codes, information such as that in the example table below must be included. It is important to note that the number of credentials per code is arbitrary and is defined entirely by the partner.
SR3 Installation Guide & User Manual Step 1: End customer navigates to the View / Add Users page in the portal and clicks “Redeem Credits” AN1031 V1.0 Copyright ©2019 UniKey Technologies. All rights reserved. UNIKEY PUBLIC.
SR3 Installation Guide & User Manual Step 2: End customer enters a valid credential code serial number. AN1031 V1.0 Copyright ©2019 UniKey Technologies. All rights reserved. UNIKEY PUBLIC.
SR3 Installation Guide & User Manual Step 3: End customer enters valid authentication number for the credential code. AN1031 V1.0 Copyright ©2019 UniKey Technologies. All rights reserved. UNIKEY PUBLIC.
SR3 Installation Guide & User Manual Step 4: End customer’s available credential balance increases. End customer can now send mobile credentials to end users. Now that the end customer has mobile credential credits available in their portal account, they can issue mobile credentials to end users. These mobile credentials will allow an end user to enter a door that supports the mobile credential. Every time a mobile credential is issued, a credential credit is consumed.
SR3 Installation Guide & User Manual Troubleshooting the SR3 Issue The reader will not read the prox card and/or fob. End-user was issued credentials and replaced their mobile device with a newer model. They downloaded the app and used their original e-mail invite link to reinstall credentials on their new device. The installation was unsuccessful. I installed the system in a multi-tenant residential condominium complex.
SR3 Installation Guide & User Manual Certifications FCC • FCC Compliance Statement: This device complies with Part 15.105 (b) of the FCC rules. 1. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SR3 Installation Guide & User Manual ISED • ISED RSS Gen Notice: 1. This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: This device may not cause interference; and This device must accept any interference, including interference that may cause undesired operation of the device. 2. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.