User Manual

ManualsBrandsUnigen ManualsElectronicsJUNO-LPA WIRELESSUS RADIO MODULE

WirelessUSB™ - UGWR2US

Solutions for a Real Time World User Manual

UM-UGWR2US 1 45388 Warm Springs Blvd. Fremont, CA 94539

support@unigen.com

TEL: (510) 668.2088 FAX: (510) 661.2788

http://www.unigen.com Toll Free: (800) 826.0808

UNIGEN CORP. WIRELESS MODULE PRODUCTS

ART NUMBER FAMILY:

UGWR2US

SERIES

JUNO-LPA WIRELESSUSB™ RADIO MODULE

USER MANUAL

FCC ID: R8KUGWR2USXXXX

Issue Date: 8 June 2004

Revision: 0.911

Revision History

Rev. No. History Issue Date Remarks

0.9 Draft Release 4 June 2004 Pending FCC Grant #

0.91 2

Draft 8 June 2004 Inclusion of FCC Grant

0911 3

Draft 8 June 2004 Change of FCC Grant

THIS DOCUMENT IS PROVIDED “AS IS” WITH NO WARRANTIES WHATSOEVER,

INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS

FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF

ANY PROPOSAL, SPECIFICATION OR SAMPLE.

Unigen Corporation disclaims all liability, including liability for infringement of any

proprietary rights, relating to use of information in this document. No license,

expressed or implied, by estoppel or otherwise, to any intellectual property rights is

granted herein.

*Third-party brands, names, and trademarks are the property of their respective

owners.

Unigen Corporation, 2004

Summary of content (17 pages)

PAGE 1
WirelessUSB™ - UGWR2US Solutions for a Real Time World User Manual UNIGEN CORP. WIRELESS MODULE PRODUCTS PART NUMBER FAMILY: UGWR2US SERIES JUNO-LPA WIRELESSUSB™ RADIO MODULE USER MANUAL FCC ID: R8KUGWR2USXXXX Issue Date: 8 June 2004 Revision: 0.911 Revision History Rev. No. History Issue Date 0.9 0.
PAGE 2
WirelessUSB™ - UGWR2US Solutions for a Real Time World User Manual ELIGIBILITY REQUIREMENTS FOR REGULATORY MODULE APPROVAL 4 User Guide Information United States of America Requirements General User Guide Requirements Topics Not Covered 5 5 5 6 UNITED STATES REGULATORY APPROVAL FCC MODULAR APPROVAL (MA) 6 Design Criteria for Modular Approval General Conditions Antennae Antenna Interconnect & Impedance 6 6 6 6 Physical Implementation 7 Emissions Compliance Testing 7 Co-location of Additional Tr
PAGE 3
WirelessUSB™ - UGWR2US Solutions for a Real Time World User Manual EUROPEAN UNION REGULATORY APPROVAL 11 Design Criteria for Modular Approval General Conditions Antennae Antenna Interconnect & Impedance 11 11 11 12 Emissions Compliance Testing 12 Exterior Labeling Requirements 13 UNITED STATES AND INTERNATIONAL TYPE APPROVAL (STANDARD REGULATORY EQUIPMENT CERTIFICATION) 14 CONTACT INFORMATION 14 APPENDIX A: 15 Agency Certifications: 15 Regulatory Compliance Statement: 15 EUROPEAN UNION “
PAGE 4
WirelessUSB™ - UGWR2US Solutions for a Real Time World User Manual ELIGIBILITY REQUIREMENTS FOR REGULATORY MODULE APPROVAL The Unigen UGWR2US WirelessUSB™ module (the “UGWR2US”) marketed under the name JUNO-LPA, is a device that transmits and receives radio signals in accordance with the spectrum regulations for the 2.4-GHz unlicensed frequency range. Regional regulatory agency approval may be required to operate UGWR2US throughout the world.
PAGE 5
WirelessUSB™ - UGWR2US Solutions for a Real Time World User Manual User Guide Information Electronic device manufacturers using Unigen’s Modular Approval are required to place the below text in their product user’s guide in accompaniment with other regulatory information. The text may be disbursed according to language or geographic regions if desired, but the exact text shown below must be maintained.
PAGE 6
WirelessUSB™ - UGWR2US Solutions for a Real Time World User Manual Topics Not Covered Topics that not covered in this manual include: ¾ Standard type approval for any country ¾ Japan’s (TELEC) regulatory approvals UNITED STATES REGULATORY APPROVAL FCC MODULAR APPROVAL (MA) The requirements for FCC Modular Approval were released in June 2000 in the FCC’s Public Notice: FCC Public Notice DA 00-1407, Part 15 Unlicensed Modular Transmitter Approvals.
PAGE 7
WirelessUSB™ - UGWR2US Solutions for a Real Time World User Manual VSWR no greater than 2.0 and having a maximum output no greater than +2dBi The transmission line must be designed to be 50-Ohm impedance. Physical Implementation The physical implementation of the RF transmission line must conform to the following guidelines: • Coaxial Cable: A coaxial of varying length may be used providing the impedance measures 50 +/- 2 ohms and is non-radiating.
PAGE 8
WirelessUSB™ - UGWR2US Solutions for a Real Time World User Manual additional RF transmitters will require review by the FCC and may require end-product recertification, including the UGWR2US to ensure emissions compliance and RF safety. It is the sole responsibility of the Digital Electronic Device manufacturer to obtain end-product regulatory compliance for configurations including two or more RF transmitters.
PAGE 9
WirelessUSB™ - UGWR2US Solutions for a Real Time World User Manual INDUSTRY CANADIAN REGULATORY APPROVAL Industry Canada regulatory approval typically conforms to the FCC in terms of emission levels and other regulatory requirements. It is the position of the Industry Canada agency that the OEM primarily responsibility for ensuring end product compliance. Unigen as grantee and supplier of the module maintains responsibility for the Modular Approved design.
PAGE 10
WirelessUSB™ - UGWR2US Solutions for a Real Time World User Manual Physical Implementation The physical implementation of the RF transmission line must conform to the following guidelines: • Coaxial Cable: A coaxial of varying length may be used providing the impedance measures 50 +/- 2 ohms and is non-radiating. Best practice RF engineering suggests the cable should be kept to the minimum length required to satisfy the application.
PAGE 11
WirelessUSB™ - UGWR2US Solutions for a Real Time World User Manual EUROPEAN UNION REGULATORY APPROVAL The requirements for EU Regulatory Approval were released in April 2000 in the EU R&TTE Directive. This directive supports self directed testing and certification for “harmonized” bands within OEM facilities or by third party. In the case of WirelessUSB, standards have become harmonized (although frequencies are not).
PAGE 12
WirelessUSB™ - UGWR2US Solutions for a Real Time World User Manual may not be modified or altered in any way from the original design as represented in the antenna datasheets as supplied by the manufacturer. The antennas selected have been specifically tested with the UGWR2US, and they are certified through the regulatory agencies in the US, Canada, and European Union for authorized use. Use of antennas in a platform other than the antennas selected by Unigen voids the MA grant for that platform.
PAGE 13
WirelessUSB™ - UGWR2US Solutions for a Real Time World User Manual Exterior Labeling Requirements European Union product labeling requirements stipulate specific text be placed on the device containing the UGWR2US module. The product must include the following text and must be located on the exterior of the OEM’s product. This same information may be included in the product user manual, however is not mandatory. Packaging and user documentation must indicate the use restrictions of the end-product (i.e.
PAGE 14
WirelessUSB™ - UGWR2US Solutions for a Real Time World User Manual UNITED STATES AND INTERNATIONAL TYPE APPROVAL (STANDARD REGULATORY EQUIPMENT CERTIFICATION) OEMs may need to obtain standard equipment regulatory agency certification as previously noted herein, and for end-product deployment in countries where Modular Approval is not recognized, or for implementations using non-certified antennae or interconnections.
PAGE 15
WirelessUSB™ - UGWR2US Solutions for a Real Time World User Manual APPENDIX A: Agency Certifications: Agency EU FCC 15.247 Test Performed Radiated Spurious Emissions Radiated Emissions Radio Performance Test EU Radiated Spurious Emissions Type 30-12.75MHz Transmit Mode 30-12.
PAGE 16
WirelessUSB™ - UGWR2US Solutions for a Real Time World User Manual EUROPEAN UNION “DECLARATION OF CONFORMITY” DECLARATION OF CONFORMITY Unigen Corporation 45388 Warm Springs Blvd. Fremont, CA 94538 USA declare under our sole responsibility that the product(s) WirelessUSB™ - UGWR2US to which this declaration relate(s) is in conformance with the following standards: EN 300-328 v1.3.1 EN 301 489-17 EN 55022 limits B following the provisions of the 73/23/EEC and 89/336/EEC Directives.
PAGE 17
WirelessUSB™ - UGWR2US Solutions for a Real Time World User Manual APPENDIX B: FCC Grant# - R8KUGWR2USXXXX The modular transmitter is approved for use in Digital Electronic Devices and may operate in conjunction with other mobile and portable transmitters in the same device; provided, the other mobile and portable transmitters have satisfied the appropriate RF exposure requirements contained in the FCC rules.