User's Manual

ManualsBrandsUnigen ManualsElectronicsWIRELESS USB

WirelessUSB™ - UGWM1US

Solutions for a Real Time World User Manual

UM-UGWM1US 1 45388 Warm Springs Blvd. Fremont, CA 94539

support@unigen.com TEL: (510) 668.2088 FAX: (510) 661.2788

http://www.unigen.com Toll Free: (800) 826.0808

UNIGEN CORP. WIRELESS MODULE PRODUCTS

PART NUMBER FAMILY:

UGWM1US S

ERIES

JUNO-M WIRELESSUSB™ RADIO MODULE

USER MANUAL

FCC ID: R8KUGWM1USHN33A

Issue Date: 25 October 2004

Revision: 0.91

Revision History

Rev. No. History Issue Date Remarks

0.9 Draft Release 2 Oct. 2004 Pending FCC Grant #

0.91 2

Draft 25 Oct. 2004 Inclusion of FCC Grant

THIS DOCUMENT IS PROVIDED “AS IS” WITH NO WARRANTIES WHATSOEVER,

INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS

FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF

ANY PROPOSAL, SPECIFICATION OR SAMPLE.

Unigen Corporation disclaims all liability, including liability for infringement of any

proprietary rights, relating to use of information in this document. No license,

expressed or implied, by estoppel or otherwise, to any intellectual property rights is

granted herein.

*Third-party brands, names, and trademarks are the property of their respective

owners.

Unigen Corporation, 2004

Summary of content (17 pages)

PAGE 1
WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual UNIGEN CORP. WIRELESS MODULE PRODUCTS PART NUMBER FAMILY: UGWM1US SERIES JUNO-M WIRELESSUSB™ RADIO MODULE USER MANUAL FCC ID: R8KUGWM1USHN33A Issue Date: 25 October 2004 Revision: 0.91 Revision History Rev. No. History Issue Date 0.9 0.91 Draft Release 2nd Draft 2 Oct. 2004 25 Oct.
PAGE 2
WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual UNIGEN CORP.
PAGE 3
WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual Exterior Labeling Requirements 13 UNITED STATES AND INTERNATIONAL TYPE APPROVAL (STANDARD REGULATORY EQUIPMENT CERTIFICATION) 14 CONTACT INFORMATION 14 APPENDIX A: 15 Agency Certifications: 15 Regulatory Compliance Statement: 15 EUROPEAN UNION “DECLARATION OF CONFORMITY” 16 MECHANICAL CHARACTERISTICS: 16 APPENDIX B: 17 FCC Grant# - R8KUGWM1USHN33A 17 UM-UGWM1US support@unigen.com http://www.unigen.
PAGE 4
WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual ELIGIBILITY REQUIREMENTS FOR REGULATORY MODULE APPROVAL The Unigen UGWM1US WirelessUSB™ module (the “UGWM1US”) marketed under the name JUNO-M, is a device that transmits and receives radio signals in accordance with the spectrum regulations for the 2.4-GHz unlicensed frequency range. Regional regulatory agency approval may be required to operate UGWM1US throughout the world.
PAGE 5
WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual User Guide Information Electronic device manufacturers using Unigen’s Modular Approval are required to place the below text in their product user’s guide in accompaniment with other regulatory information. The text may be disbursed according to language or geographic regions if desired, but the exact text shown below must be maintained.
PAGE 6
WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual Topics Not Covered Topics that not covered in this manual include: ¾ Standard type approval for any country ¾ Japan’s (TELEC) regulatory approvals UM-UGWM1US support@unigen.com http://www.unigen.com 6 Copyright Unigen Corporation, 2004 45388 Warm Springs Blvd. Fremont, CA 94539 TEL: (510) 668.2088 FAX: (510) 661.2788 Toll Free: (800) 826.
PAGE 7
WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual UNITED STATES REGULATORY APPROVAL FCC MODULAR APPROVAL (MA) The requirements for FCC Modular Approval were released in June 2000 in the FCC’s Public Notice: FCC Public Notice DA 00-1407, Part 15 Unlicensed Modular Transmitter Approvals. Design Criteria for Modular Approval General Conditions The following conditions must be strictly adhered to for modular approval: 1. No modification to the module including the circuitry is permitted 2.
PAGE 8
WirelessUSB™ - UGWM1US Solutions for a Real Time World • User Manual Part 15 Section 15.109 Sub-paragraph A, Class B Radiated Emission Limits These emissions tests can be conducted by the manufacturer or by contacting an approved test facility equipped and certified accordingly. The results of these emissions tests are not required to be submitted to the FCC or Unigen, but should be kept on file by the OEM.
PAGE 9
WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual INDUSTRY CANADIAN REGULATORY APPROVAL Industry Canada regulatory approval typically conforms to the FCC in terms of emission levels and other regulatory requirements. It is the position of the Industry Canada agency that the OEM primarily responsibility for ensuring end product compliance. Unigen as grantee and supplier of the module maintains responsibility for the Modular Approved design.
PAGE 10
WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual Applicable sections include: • Part 15 Section 15.109 Sub-paragraph A, Class B Radiated Emission Limits These emissions tests can be conducted by the manufacturer or by contacting an approved test facility equipped and certified accordingly. The results of these emissions tests are not required to be submitted to the FCC or Unigen, but should be kept on file by the OEM.
PAGE 11
WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual EUROPEAN UNION REGULATORY APPROVAL The requirements for EU Regulatory Approval were released in April 2000 in the EU R&TTE Directive. This directive supports self directed testing and certification for “harmonized” bands within OEM facilities or by third party. In the case of WirelessUSB, standards have become harmonized (although frequencies are not).
PAGE 12
WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual impedance and frequency range of the UGWM1US. This antenna may not be modified or altered in any way from the original design as represented by the manufacturer. The antenna selected have been specifically tested with the UGWM1US, and they are certified through the regulatory agencies in the US, Canada, and European Union for authorized use.
PAGE 13
WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual Exterior Labeling Requirements European Union product labeling requirements stipulate specific text is placed on the device containing the UGWM1US module. The product must include the following text and must be located on the exterior of the OEM’s product. This same information may be included in the product user manual, however is not mandatory. Packaging and user documentation must indicate the use restrictions of the end-product (i.e.
PAGE 14
WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual UNITED STATES AND INTERNATIONAL TYPE APPROVAL (STANDARD REGULATORY EQUIPMENT CERTIFICATION) OEMs may need to obtain standard equipment regulatory agency certification as previously noted herein, and for end-product deployment in countries where Modular Approval is not recognized, or for implementations using non-certified antennae or interconnections.
PAGE 15
WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual APPENDIX A: Agency Agency EU FCC 15.247 Test Performed Radiated Spurious Emissions Radiated Emissions Radio Performance Test EU Radiated Spurious Emissions Type 30-12.75MHz Transmit Mode 30-12.
PAGE 16
WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual EUROPEAN UNION “DECLARATION OF CONFORMITY” DECLARATION OF CONFORMITY Unigen Corporation 45388 Warm Springs Blvd. Fremont, CA 94538 USA declare under our sole responsibility that the product(s) WirelessUSB™ - UGWM1US to which this declaration relate(s) is in conformance with the following standards: EN 300-328 v1.3.1 EN 301 489-17 EN 55022 limits B following the provisions of the 73/23/EEC and 89/336/EEC Directives.
PAGE 17
WirelessUSB™ - UGWM1US Solutions for a Real Time World User Manual APPENDIX B: FCC Grant# - R8KUGWM1USHN33A The modular transmitter is approved for use in Digital Electronic Devices and may operate in conjunction with other mobile and portable transmitters in the same device; provided, the other mobile and portable transmitters have satisfied the appropriate RF exposure requirements contained in the FCC rules.