User's Manual

ManualsBrandsUnigen ManualsElectronics2.4GHz WIRELESS MODULE

UGWDR82NUH50

Solutions for a Real Time World User Manual

UM- UGWDR82NUH50 1 45388 Warm Springs Blvd. Fremont, CA 94539

support@unigen.com

TEL: (510) 668.2088 FAX: (510) 661.2788

http://www.unigen.com Toll Free: (800) 826.0808

UNIGEN CORP. WIRELESS MODULE PRODUCTS

ART NUMBER:

UGWDR82NUH50A

SAN GABRIEL 802.11B/G/N USB RADIO MODULE

USER MANUAL

FCC ID: R8KUGWDR82N

Issue Date: 12 October, 2009

Revision: 0.91

Revision History

Rev. No. History Issue Date Remarks

0.9 Draft Release 08 July, 2009 Pending FCC Grant #

0.91 Revised 12 October, 2009 Add “Warning Note” pg 5

THIS DOCUMENT IS PROVIDED “AS IS” WITH NO WARRANTIES WHATSOEVER,

INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS

FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF

ANY PROPOSAL, SPECIFICATION OR SAMPLE.

Unigen Corporation disclaims all liability, including liability for infringement of any

proprietary rights, relating to use of information in this document. No license,

expressed or implied, by estoppel or otherwise, to any intellectual property rights is

granted herein.

*Third-party brands, names, and trademarks are the property of their respective

owners.

Unigen Corporation, 2009

Summary of content (17 pages)

PAGE 1
UGWDR82NUH50 Solutions for a Real Time World User Manual UNIGEN CORP. WIRELESS MODULE PRODUCTS PART NUMBER: UGWDR82NUH50A SAN GABRIEL 802.11B/G/N USB RADIO MODULE USER MANUAL FCC ID: R8KUGWDR82N Issue Date: 12 October, 2009 Revision: 0.91 Revision History Rev. No. History Issue Date 0.9 0.
PAGE 2
UGWDR82NUH50A Solutions for a Real Time World User Manual UNIGEN CORP. WIRELESS MODULE PRODUCTS 1 PART NUMBER: UGWDR82NUH50A 1 SAN GABRIEL 802.
PAGE 3
UGWDR82NUH50A Solutions for a Real Time World User Manual Exterior Labeling Requirements 13 UNITED STATES AND INTERNATIONAL TYPE APPROVAL (STANDARD REGULATORY EQUIPMENT CERTIFICATION) 14 CONTACT INFORMATION 14 APPENDIX A: 15 Agency Certifications: 15 Regulatory Compliance Statement: 15 EUROPEAN UNION “DECLARATION OF CONFORMITY” 16 MECHANICAL CHARACTERISTICS: 16 APPENDIX B: 17 FCC Grant# - R8KUGWDR82N 17 UM- UGWDR82NUH50A support@unigen.com http://www.unigen.
PAGE 4
UGWDR82NUH50A Solutions for a Real Time World User Manual ELIGIBILITY REQUIREMENTS FOR REGULATORY MODULE APPROVAL The Unigen UGWDR82NUH50A module (the “UGWDR82NUH50A”) marketed under the name San Gabriel, is a device that transmits and receives radio signals in accordance with the spectrum regulations for the 2.4-GHz unlicensed frequency range. Regional regulatory agency approval may be required to operate UGWDR82NUH50A throughout the world.
PAGE 5
UGWDR82NUH50A Solutions for a Real Time World User Manual User Guide Information Electronic device manufacturers using Unigen’s Modular Approval are required to place the below text in their product user’s guide in accompaniment with other regulatory information. The text may be disbursed according to language or geographic regions if desired, but the exact text shown below must be maintained.
PAGE 6
UGWDR82NUH50A Solutions for a Real Time World User Manual approval procedures. These approvals are the sole responsibility of the OEM. Unigen may recommend, upon request, TELEC certified laboratories capable of facilitating the appropriate test procedures for the UGWDR82NUH50A. Topics Not Covered Topics that not covered in this manual include: ¾ Standard type approval for any country ¾ Japan’s (TELEC) regulatory approvals UM- UGWDR82NUH50A support@unigen.com http://www.unigen.
PAGE 7
UGWDR82NUH50A Solutions for a Real Time World User Manual UNITED STATES REGULATORY APPROVAL FCC MODULAR APPROVAL (MA) The requirements for FCC Modular Approval were released in June 2000 in the FCC’s Public Notice: FCC Public Notice DA 00-1407, Part 15 Unlicensed Modular Transmitter Approvals. Design Criteria for Modular Approval General Conditions The following conditions must be strictly adhered to for modular approval: 1. No modification to the module including the circuitry is permitted 2.
PAGE 8
UGWDR82NUH50A Solutions for a Real Time World • User Manual Part 15 Section 15.109 Sub-paragraph A, Class B Radiated Emission Limits These emissions tests can be conducted by the manufacturer or by contacting an approved test facility equipped and certified accordingly. The results of these emissions tests are not required to be submitted to the FCC or Unigen, but should be kept on file by the OEM.
PAGE 9
UGWDR82NUH50A Solutions for a Real Time World User Manual INDUSTRY CANADIAN REGULATORY APPROVAL Industry Canada regulatory approval typically conforms to the FCC in terms of emission levels and other regulatory requirements. It is the position of the Industry Canada agency that the OEM primarily responsibility for ensuring end product compliance. Unigen as grantee and supplier of the module maintains responsibility for the Modular Approved design.
PAGE 10
UGWDR82NUH50A Solutions for a Real Time World User Manual Applicable sections include: • Part 15 Section 15.109 Sub-paragraph A, Class B Radiated Emission Limits These emissions tests can be conducted by the manufacturer or by contacting an approved test facility equipped and certified accordingly. The results of these emissions tests are not required to be submitted to the FCC or Unigen, but should be kept on file by the OEM.
PAGE 11
UGWDR82NUH50A Solutions for a Real Time World User Manual EUROPEAN UNION REGULATORY APPROVAL The requirements for EU Regulatory Approval were released in April 2000 in the EU R&TTE Directive. This directive supports self directed testing and certification for “harmonized” bands within OEM facilities or by third party. In the case of 802.11 WiFi, standards have become harmonized (although frequencies are not).
PAGE 12
UGWDR82NUH50A Solutions for a Real Time World User Manual impedance and frequency range of the UGWDR82NUH50A. This antenna may not be modified or altered in any way from the original design as represented by the manufacturer. The antenna selected have been specifically tested with the UGWDR82NUH50A, and they are certified through the regulatory agencies in the US, Canada, and European Union for authorized use.
PAGE 13
UGWDR82NUH50A Solutions for a Real Time World User Manual Exterior Labeling Requirements European Union product labeling requirements stipulate specific text is placed on the device containing the UGWDR82NUH50A module. The product must include the following text and must be located on the exterior of the OEM’s product. This same information may be included in the product user manual, however is not mandatory. Packaging and user documentation must indicate the use restrictions of the end-product (i.e.
PAGE 14
UGWDR82NUH50A Solutions for a Real Time World User Manual UNITED STATES AND INTERNATIONAL TYPE APPROVAL (STANDARD REGULATORY EQUIPMENT CERTIFICATION) OEMs may need to obtain standard equipment regulatory agency certification as previously noted herein, and for end-product deployment in countries where Modular Approval is not recognized, or for implementations using non-certified antennae or interconnections. The details of standard equipment regulatory compliance are beyond the scope of this document.
PAGE 15
UGWDR82NUH50A Solutions for a Real Time World User Manual APPENDIX A: Agency Certifications: Agency EU FCC 15.249 Test Performed Radiated Spurious Emissions Radiated Emissions Type 30-12.75MHz Transmit Mode 30-12.
PAGE 16
UGWDR82NUH50A Solutions for a Real Time World User Manual EUROPEAN UNION “DECLARATION OF CONFORMITY” DECLARATION OF CONFORMITY Unigen Corporation 45388 Warm Springs Blvd. Fremont, CA 94538 USA declare under our sole responsibility that the product(s) San Gabriel - UGWDR82NUH50A to which this declaration relate(s) is in conformance with the following standards: EN 300-328 v1.3.1 EN 301 489-17 EN 55022 limits B following the provisions of the 73/23/EEC and 204/108/EEC Directives.
PAGE 17
UGWDR82NUH50A Solutions for a Real Time World User Manual APPENDIX B: FCC Grant# - R8KUGWDR82N The modular transmitter is approved for use in Digital Electronic Devices and may operate in conjunction with other mobile and portable transmitters in the same device; provided, the other mobile and portable transmitters have satisfied the appropriate RF exposure requirements contained in the FCC rules.