UIC802 Portable Reader Product User Guide UDN UIC802-PUG Rev. 1.0 July-21-2005 Uniform Industrial Corp. (UIC) 47709 Fremont Blvd., Fremont, CA94538. U.S.A. Tel: 510-438-6799 Email: Fax: 510-438-6790 info@uicusa.com URL: Toll Free: 1-888-881-1900 www.uicusa.
What is the UIC802? The UIC802 is a battery operated contactless RFID and magnetic stripe card reader designed for data collection application such as Trade Show Lead Capture, Time & Attendance, Off-line E-Payment, etc. The UIC802 has many advanced features yet it’s very simple to use. The UIC802 contains two readers modules. One is the contactless RFID reader. The other one is a manual insert magnetic card reader which can decode 3 tracks ISO, AAMVA, and custom data formats.
Contactless RFID Card Reader - Supports a reading distance of 1 inch - Supports 13.
UIC802 Card Reading Operation The UIC802 is designed specifically for data collection purpose. The LCD display prompt and setup screens that make the UIC802 very easy to use. Here are some simple steps to operate the UIC802. They involve the reading of two types of cards: (I) Magnetic Card Only – when RFID is disabled (II) Magnetic Card and RFID Card – When RFID is enabled To learn how to turn on the RFID operation, please refer to the section of ‘RFID Enable’ in the System Command Menu section.
b. The UIC802 detect read error. The UIC802 will display the error code and the message “Pls Reinsert Card” as the idle prompt. Magnetic Error Track (II) 1 Pls Reinsert CRD Pls Insert Card 08-15 08-15 12:36 PM 12:36 PM Magnetic Card and RFID Card Operation 1. Press the POWER key to wake up the UIC802. The UIC802 will beep and displays the idle prompt: Please Read Card 08-15 12:36 P 00% 2.
CRD” will become “ Pls ReRead Card”. Function Keys F1 F2 F3 These function keys are used to scroll through the card content, after a card reading was taken, no matter from the magnetic or contactless card. After a successful card reading, pressing the CLEAR key and the F2 key together will bring the unit into card data display mode. It will display the first 32 bytes of the card data.
When the I.D. Entry option is enabled, the UIC802 will prompt the user to enter the PID (Personal Identification) number after a successful card read. The PID is any 6 digits number. The PID will be stored in Flash memory along with the captured card data. Application Example: Trade Show Lead Capture This option can record which the sales person that took the lead. The sales person ID will be stored in the memory with the captured lead information. 3.
The UIC802 has build in buzzer to provide audio feedback for prompt to remove card, card read error, request key entry from user, and completion of data saving 6. Selection “5” – Data Memory Access and Information 1=Upload 2=Rec# 3=% MEM Used 1=Upload To upload the content of the memory to P.C. 2=Rec# Display the total number of records (each card read) 3=% MEM Used Display the percentage of memory that are used 7.
1. To access the System Command Menu, press the keys “CLEAR” and “9” together. The System Command Menu is password protected. The LCD displays the message “Enter Password”. ( Default password is 842811 ). Press “CLEAR” to exit from the System Command Menu anytime. Enter Password Key in the 6 digits password and the “ENTER” key. The LCD displays the System Command selection menu 1=DT 2=SP 3=PW 4ER 5ID 6UF 7RF 2. Selection “1” – Time and Date setting.
5. Selection “4” – Erase Data, this menu selection is used to erase all data from flash memory and reset all setting back to the factory default. Please use this selection with care. The data cannot be recovered once the flash memory is erased. Erase Data 1=YES 2=NO 3=RS 1=YES Erase all data from flash memory.
of the reader is turned off in order to reduce the power consumption. However, if we have to read RFID cards, we have to turn on the circuit through this command menu. UIC801 Utility Program The UIC801 Utility Program greatly simplifies and enhances the usage of the UIC802 Portable Reader. The UIC801 Utility Program has the following functionality. 1. Upload Data – retrieve data from the UIC802 reader flash memory to the Utility Program buffer.
Upload Data Display Data Save Data to File Synchronize Time/Date Erase Memory Utility Program Installation 1. Copy the contents of the UIC801 Utility Disk to a newly created folder in the local hard drive. 2. Open the folder and click the program “UIC Utility”. 3. Connect the UIC801 to the RS232 COM 1 port of the P.C. Make sure the UIC802 is power on. We recommend setting the sleep timer option to 2 = 300 second. 4. Click the red indicator located above “SS/ES Enable”.
of 15
I/O Connector Pin Assignment Pin 1 PIN NO. SIGNAL NAME DESCRIPTION 1 Ground System Ground 2 TTL Serial Output TTL Serial Data Output from UIC802 3 TTL Serial Input TTL Serial Data Input to UIC802 4 BATT Output +3VDC output from UIC802 5 N.C.
Regulatory Information Federal Communications Commission (FCC) Radio Frequency Interference Statement (USA Only) This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protections against harmful interference in a residential installation.