Directional Dual-Band Antenna for UAP-AC-M Model: UMA-D
Introduction Thank you for purchasing the Ubiquiti Networks® UniFi® 802.11ac Indoor/Outdoor Mesh Antenna. This Quick Start Guide is designed to guide you through installation and includes warranty terms. Package Contents UMA-D Antenna Screws (Qty. 4) Ball Joint Mount Screw Anchors (Qty. 4) Hex Bolt Lock Ring Wall Mount Plate Directional Dual-Band Antenna for UAP-AC-M Model: UMA-D Metal Strap RF Cables (Qty.
Installation Requirements • • • • • UniFi AC Mesh Access Point, model UAP-AC-M Wall-mounting: drill and 6 mm drill bit Pole-mounting: 7 mm socket wrench Phillips screwdriver Shielded Category 5 (or above) cabling with drain wire should be used for all outdoor wired Ethernet connections and should be grounded through the AC ground of the PoE.
Hardware Installation The UniFi antenna can be mounted on a wall or pole. Perform the following steps for proper installation: Wall Mount To mount the UniFi antenna on a wall, use the included Wall Mount Plate, Screws, and Screw Anchors. 1. Place the Wall Mount Plate at the desired location on the wall in the orientation shown below. 2. Pre-drill the holes using a 6 mm drill bit. 3. Insert a Screw Anchor into each hole. 4. Secure the Wall Mount Plate with four Screws.
. Insert the Ball Joint Mount into the Lock Ring. 6. Secure the Ball Joint Mount to the Wall Mount Plate using the Hex Bolt.
7. Attach the antenna to the Ball Joint Mount and turn the Lock Ring to secure it. Keep the Lock Ring loose enough to allow the antenna to pivot for aiming. 8. Connect one end of the RF Cables to the antenna.
9. Connect the other end of the RF Cables to the UAP-AC-M.
Pole Mount 1. Insert the Ball Joint Mount into the Lock Ring with the threads of the Lock Ring facing the ball joint. 2. Open the Metal Strap and feed it through the base of the Ball Joint Mount.
3. Wrap the Metal Strap around the pole. Use a 7 mm socket wrench to turn the screw clockwise and securely fasten the clamp to the pole. 4. Attach the antenna to the Ball Joint Mount and turn the Lock Ring to secure it. Keep the Lock Ring loose enough to allow the antenna to pivot for aiming.
5. Connect one end of the RF Cables to the antenna.
6. Connect the other end of the RF Cables to the UAP-AC-M.
Specifications UMA-D Dimensions Weight With Mount Without Mount Enclosure Supported Frequency Range 201.3 x 128.0 x 32.5 mm (7.93 x 5.04 x 1.28") 480 g (16.93 oz) 400 g (14.11 oz) Outdoor UV Stabilized Plastic 2.4 - 2.5 GHz 5.1 - 5.9 GHz HPOL Beamwidth 2.4 GHz 5 GHz 90° 45° VPOL Beamwidth 2.4 GHz 5 GHz 90° 45° Elevation Beamwidth 2.4 GHz 5 GHz 90° 45° Maximum VSWR Polarization 2.5:1 Dual-Linear Cross-Pol Isolation 2.4 GHz 5 GHz 25 dB 30 dB Antenna Gain 2.
Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in a location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1.
Limited Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
Returns No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS’ facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal.
Limitation of Liability EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities.
Español La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
Declaration of Conformity български [Bulgarian] С настоящото UBIQUITI NETWORKS декларира, че този тип радиосъоръжение UMA-D е в съответствие с Директива 2011/65/ЕС. Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес: www.ubnt.com/compliance Hrvatski [Croatian] UBIQUITI NETWORKS ovime izjavljuje da je radijska oprema tipa UMA-D u skladu s Direktivom 2011/65/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedećoj internetskoj adresi: www.ubnt.
Malti [Maltese] B’dan, UBIQUITI NETWORKS, niddikjara li dan it-tip ta’ tagħmir tar-radju UMA-D huwa konformi mad-Direttiva 2011/65/UE. Id-dikjarazzjoni tal-konformità tista’ tiġi kkonsultata minn www.ubnt.com/compliance Norsk [Norwegian] UBIQUITI NETWORKS erklærer herved at utstyret UMA-D er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 2011/65/EU. Den fulle teksten til EU-samsvarserklæringen er tilgjengelig på følgende internettadresse: www.ubnt.