The BTC88A Operations Smart key SIM Card No Yes Figure 1 1. Power up : At every time’s powering as below : Display up , the LCD screen will display the screen The whole screen will be shown around 2 sconds then proceed to the next screen . 2.
In disconnected idle mode , BT mobile can perform the Bluetooth paring with car kit, the passcode is 1234 , if pairing is successful , the screen will be shown as below for 2 seconds : When car kit builds the Bluetooth connection with the BT mobile, it will working idle mode . enter the 3. Working idle mode : the screen will be like following : Mobile phone name Antenna logo status Battery status logo Main function zone: default is phone book .
For the guest user , it can only display the income caller ID ( number) and it will not be saved after power down, if it wants to become the member user , he can press the Smart key to enter the setting menu , and select the Advanced setting menu to delete or replace the member user , which will be described in the later chapter for Settings.
After downloading complete , it will exit automatically. The maximum phone book records number from SIM card reader is 255. 4.2 wireless phone book downloading from Mobile phone or mobile phone SIM card : please refer to the phone book settings in the settings chapter. *Note: this function will be subjected to the BT mobile phone which can support AT command ( Typical Brand : Sony Ericsson , Motorola,Nokia S40 3rd series). 4.
User can press Yes key to receive or No key to reject the call. If the incoming call number is in the phonebook records ,the related name will be displayed : When the call was received and the line is active , LCD screen will be shown as : Options prompt Line Connection time During incoming call line is activate, the user can perform the Microphone muting ,Speaker volume adjust , Call transfer functions, and Microphone gain adjust. 5.1 Muting Microphone: Press and hold the Yes key for 1.
user can select the call transfer function or returned back to the screen just before by pressing Smart key, the call transferred screen will be like : Press Smart key again call will be tranferred back to car kit if the Bluetooth connection still maintained after call transferred . 5.
swapped accordingly. Press No key will hang up the current active line. 7. Missed calls : when there are missed calls as below screen : Press the Smart key will enter the call regsiters and view the missed calls. 8. Last number redial in the mobile: Press and hold the Yes key for 2 seconds in working idle mode will perform the last number in the mobile redialing, the screen will be like : When the line is activated , the screen will be as : Press the Smart key to enter the options for the activated line.
You can rotate and press the Smart key to select adding “+” , “0” or “Delete + and 0” ahead of the original call register number. For some Bluetooth mobile phone not sending the “+” or “0” to the caller ID by Bluetooth, this function is helpful. Select return back logo to return the screen just before, press No key to quit call register.
Press the Smart key to enter the Phone book functions,the screen for initial alphabet selection of phone book records will be shown: Phone book records can be listed according to the 26 English Alphabet A To Z, press the selected Alphabet, will display the phone book start with this alphabet: Phonebook category logo at the right side , there is a phonebook category logo to mark the phone book records.
Delete logo Press Yes key will dial out the number: 12. Voice Dailing : In the working idle mode as the screen: . press the Smart key to active the voice dialing screen : User can speak the voice tag after the reminding tone,if voice tag is recognized by the mobile phone ,the related phone number will be dialed out, press No key to cancel and exit to the working idle mode. Once the line is active , the screen will be like following : 13.
There are 3 options of settings : Advanced , phone book, Languages. Press No key to exit . 13.1 Advanced setting : 13.1.1 Contrast adjust : Rotate and Press Smart key to enter the Advanced setting : for the normal member user , will prompt the contrast setting screen as below: Rotate the Smart key to adjust the LCD screen contrast to the best value. Press Smart key to confirm the setting value and exit , press No key to discard the setting and return back. 13.1.
If guest user wants to become member user, but don’t need its records, it can choose the current member user name then press Smart key enter the “delete” option: Press the Smart key to select the deleted logo, the deleted inquiring screen will appear: Press Yes key to delete, No key to cancel and return back. 13.
The setting menu will support six languages: English, Spanish, German, French, Portuguese, Italian, press the Smart key to the Languages setting, the screen will be like: Rotate and press the Smart key to select the language, settings menu language will be changed accordingly. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
