EXAI 7248 SERIES OWNER'S MANUAL
EXAI7248.book 1 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Contents Welcome/Features Controls and Functions Terms Used in this Manual Getting Started Installing the Phone A. Choose the Best Location B. Install the Rechargeable Battery Pack into the Handset C. Connect the Base Unit and Charge the Handset D.
EXAI7248.book 2 ページ Welcome ２００４年１月１５日 木曜日 午前１１時５６分 Congratulations on your purchase of the Uniden cordless telephone and answering system. This phone is designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit. The color of your cordless phone may vary.
EXAI7248.book 3 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Controls and Functions 1 5 3 6 7 8 4 12 13 14 15 16 17 9 10 11 18 19 Retrieve TAD message with Handset Remote keys Play Repeat Delete Skip 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19.
EXAI7248.
EXAI7248.book 5 ページ ２００４年１月１５日 木曜日 午前１１時５６分 G ETT ING S TA RT E D Installing the Phone note If your home has specially wired alarm equipment connected to the telephone line, be sure that installing the system does not disable your alarm equipment. If you have questions about what will disable your alarm equipment, contact your telephone company or a qualified installer. Do the following steps: A. B. C. D.
EXAI7248.book 6 ページ ２００４年１月１５日 木曜日 午前１１時５６分 The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is placed in the base unit. 1) Press down on the handset battery case cover (use the finger indention for a better grip) and slide the cover downward to remove. 2) Plug the battery pack connector (red & black wires) into the jack inside the battery compartment. (The connector notches fit into the grooves of the jack only one way.
EXAI7248.book 7 ページ ２００４年１月１５日 木曜日 午前１１時５６分 G ETT ING S TA RT E D C. Connect the Base Unit and Charge the Handset ! •Use only the supplied AD-314 AC adapter. Do not use any other AC adapter. •Do not place the power cord where it creates a trip hazard or where it could become chafed and create a fire or electrical hazard. 1) Connect the AC adapter to the DC IN 9V jack and to a standard 120V AC wall outlet. 2) Place the handset in the base unit with the keypad facing forward.
EXAI7248.book 8 ページ ２００４年１月１５日 木曜日 午前１１時５６分 G ETT ING S TA RT E D D. Mount the Base Unit on a Wall Standard wall plate mounting This phone can be mounted on any standard wall plate. 1) Locate the base unit on the wall mount adapter as shown and slide the wall mount adapter into the notches on the base bottom. 1 2) Plug the AC adapter to the DC IN 9V jack. 3) Route the AC adapter cord through the molded wiring channel as shown. 2 5 7 6 4) Plug the AC adapter into a standard 120V AC wall outlet.
EXAI7248.book 9 ページ ２００４年１月１５日 木曜日 午前１１時５６分 If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Try to mount your phone within 5 feet of a working phone jack to avoid excessive cord lengths. • Make sure the wall material is capable of supporting the weight of the base and handset.
EXAI7248.book 10 ページ ２００４年１月１５日 木曜日 午前１１時５６分 G ETT ING S TA RT E D Headset Installation Your phone may be used with an optional headset, the Uniden HS910. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations. (Headset may be purchased by calling the Uniden Parts Department or visiting the web site. See page 53.) www.uniden.
EXAI7248.book 11 ページ ２００４年１月１５日 木曜日 午前１１時５６分 There are five basic options that you will need to set up: AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code, Dial Mode and Language. Activating AutoTalk AutoTalk allows you to answer the phone simply by removing the handset from the base. You do not have to press any keys. 1) When the phone is in standby mode, press and hold the caller id/ menu key. The following screen appears. 2) Press the select/remote key to turn AutoTalk on.
EXAI7248.book 12 ページ /vol/ key to select 木曜日 午前１１時５６分 C IDC W. 3) Press the select/remote key to toggle and turn on Caller ID on Call Waiting. 4) Press the end key and return the handset to the base unit to complete the setting. The handset returns to standby mode. Entering Your Area Code If you enter a 3-digit area code number in the Ar ea Cod e option, your local area code does not appear in Caller ID messages. Do not program this option if your calling area requires 10-digit dialing.
EXAI7248.book 13 ページ ２００４年１月１５日 木曜日 午前１１時５６分 note •If you are not sure of your dialing system, make a trial call. If the call connects, leave the setting as is. Otherwise, set for pulse dialing. •If your phone system requires pulse dialing and you need to send DTMF tones during a call, you can temporarily switch over to tone dialing. (Refer to “Tone Dialing Switch-over” on page 17.) Choosing the Dialing Mode Most phone systems use tone dialing.
EXAI7248.book 14 ページ ２００４年１月１５日 木曜日 E ng , Fr. or Es p. 4) Press the end key to complete the setting. The handset returns to standby mode. Selecting the Ring Tone and Volume Your phone has five different ringer tone/volume combinations you can choose from. 1) With the phone in standby mode, press the /vol/ or /vol/ key. 2) The phone will sound the different ring tones at different volumes. 3) When the phone sounds the ring tone and volume you wish to use, press the end key. www.uniden.
EXAI7248.book 15 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Using Your Phone Making and Receiving Calls Making a call BASICS 1) Remove the handset from the base. 2) Press the talk/flash key. 3) Listen for the dial tone. 4) Dial the number. OR 1) Remove the handset from the base. 2) Dial the number. 3) Press the talk/flash key. Receiving a call note Refer to page 11 "Basic Setup" to turn on the AutoTalk feature if desired. [15] BASICS 1) Remove the handset from the base.
EXAI7248.book 16 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Redialing the last dialed number 1) Remove the handset from the base. 2) Press the talk/flash key. 3) Listen for the dial tone. 4) Press the redial/pause key. OR 1) Remove the handset from the base. 2) Press the redial/pause key. 3) Press the talk/flash key. Adjusting the Earpiece Volume /vol/ or BASICS To change the earpiece volume, press the key during a call.
EXAI7248.book 17 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Tone Dialing Switch-over note If your phone is set to pulse dialing mode, make your call normally. Once your call connects, press the /tone/← key. Any digits you enter from then on will be sent as tone digits. When this particular call ends, the phone automatically returns to pulse dialing mode. * Traveling Out-of-Range During a call, as you begin to move your handset too far from your base unit, noise increases.
EXAI7248.book 18 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Find Handset To locate the handset, press the find hs key on the base. The handset beeps for 60 seconds. Paging is canceled when pressing any handset key, the find hs key on the base or the handset is returned to the base. Paging is also canceled when the phone receives an incoming call. BASICS Using Call Waiting If you have Call Waiting service, you can receive calls while on the line.
EXAI7248.book 19 ページ ２００４年１月１５日 木曜日 午前１１時５６分 RocketDial RocketDial is a one-touch speed dial key. Store your most important or most frequently called number as your RocketDial number. Then, simply press the Rocketdial key, and your phone will automatically dial the number. Storing the RocketDial 1) When the phone is in standby mode, press and hold the Rocketdial key. The following display appears. If the RocketDial number is already programmed, the Edit screen appears.
EXAI7248.book 20 ページ ２００４年１月１５日 木曜日 午前１１時５６分 The speed dial memory allows you to store up to 10 names and numbers in the handset. You can dial these numbers with just a few key presses. The speed dial memory is not limited to phone numbers. You can store any number (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing. For example, you can save your bank account number to speed dial memory.
EXAI7248.book 21 ページ If the next character uses the same number key, you must press the #/→ key to move the cursor over. Otherwise the next time you press the number key, it changes the character that was previously set. 木曜日 午前１１時５６分 4) Enter a name according to the instructions below, then press the select/remote key. If no name is required, go to step 5. • The name can be up to 13 characters. • Use the #/→ and /tone/← keys to move the cursor to the desired location.
EXAI7248.book 22 ページ ２００４年１月１５日 木曜日 午前１１時５６分 6) Use the keypad to enter the phone number; each number can be up to 20 digits. If you need the phone to pause during the dialing sequence, press the redial/pause key to insert a two-second delay between the numbers. You can enter multiple pauses to increase the delay. Each pause counts as a digit. The display shows a P for every pause. U S I N G T H E S P E E D D IA L M E M O RY 5) Store Number is displayed.
EXAI7248.book 23 ページ ２００４年１月１５日 木曜日 午前１１時５６分 note You cannot store a Caller ID message if no phone number appears in the message. Messages (Caller ID names/numbers) shown in the Caller ID list can be stored in memory dialing. For instructions on viewing the Caller ID Message list, see page 26. 1) Press the caller id/menu key. Select the phone number to be stored from the Caller ID list by pressing the /vol/ or / vol/ key. 2) Press the memory key.
EXAI7248.book 24 ページ ２００４年１月１５日 木曜日 午前１１時５６分 1) Press the memory key. The handset displays your programmed speed dial number. 2) Enter the number (0 - 9), or press the /vol/ or /vol/ key to select the speed dial number you would like to dial. U S I N G T H E S P E E D D IA L M E M O RY Making Calls from Speed Dial Memory 3) Press the talk/flash key. Talk and the number selected appear on the display. Then the displayed number is dialed.
EXAI7248.book 25 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Caller ID and CIDCW (Caller ID on Call Waiting) note •When the call is received via a telephone company that does not offer Caller ID service, the caller´s phone number and name do not appear. (This includes international calls.) •When the call is via a private branch exchange (PBX), the caller´s phone number and name may not appear.
EXAI7248.book 26 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Viewing the Caller ID Message List The Caller ID list stores information for up to 30 incoming calls - even unanswered calls. 1) With the phone in standby mode, press the caller id/menu key. The summary screen appears. The screen shows the number of new messages and total messages. 3) Press the end key to return to standby mode.
EXAI7248.book 27 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Deleting Information from the Caller ID List note •If you get an incoming call or page, the deleting operation is canceled, and you can answer the call or page. Deleting a Caller ID Message 1) Press the caller id/menu key in standby mode. Find the message to be deleted from the Caller ID list by pressing the /vol/ or /vol/ key.
EXAI7248.book 28 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Making a Call from the Caller ID List You can place a call from the Caller ID list. 1) Press the caller id/menu key in standby mode. Select the phone number that you want to dial by pressing the /vol/ or / vol/ key. note 2) To have the phone dial a "1 " before the displayed Caller ID number, press 1. To have the phone dial the stored area code before the displayed Caller ID number, press 3. 3) Press the talk/flash key.
EXAI7248.book 29 ページ ２００４年１月１５日 木曜日 午前１１時５６分 The Integrated Answering Device The cordless phone has a built-in answering system that answers and records incoming calls. You can also use your answering system to record a conversation, leave a voice memo message, or to announce a special outgoing message to callers when you're away from your phone.
EXAI7248.book 30 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Turning the Answering System On/Off 1) To turn the answering system on, press the answer on/off key. The system will announce "Answering system is on." The current greeting message will be played, and you hear a confirmation tone. The message counter displays the number of messages stored in memory. If the display flashes, there are new messages waiting for you. 2) To turn the answering system off, press the answer on/off key again.
EXAI7248.book 31 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Setting Up Your Answering System note Answering System Settings To set the following six functions you must enter the menu mode. •For your convenience, voice prompts will guide you through the menu mode. •After the setting, press the (play/stop) key to exit the menu mode, or the menu/ clock key to move to the next menu option.
EXAI7248.book 32 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Setting the Time The clock on the cordless phone’s answering system starts when power is supplied to the base. Follow these steps to set the clock to the correct time. 1) With the phone in standby mode, press the menu/ clock key. The system announces “Time,” the current time and the guidance for setting the time. 2) Press the or /volume/select key until the correct day is announced. The numbers [ ] through [ ] are displayed on the base.
EXAI7248.book 33 ページ ２００４年１月１５日 木曜日 午前１１時５６分 7) Press the set key to select the minute. 8) Press the or /volume/select key until you hear the correct AM or PM setting. The message counter displays [ ] or [ ]. 9) Press the set key to select the AM/PM setting. You hear a confirmation tone. Then the announcement "Time" and the day and time are announced for your review. After a few seconds, the system announces “To set security code, press menu again.
EXAI7248.book 34 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Setting the Ring Time The ring time setting allows you to set the number of rings the caller hears before your answering system plays the outgoing message. You can set the ring time to answer after two, four, or six rings. Setting [ ] (Toll Saver), the answering system picks up after two rings if you have new messages, and after four rings if there are none.
EXAI7248.book 35 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Selecting the Message Record Time note After setting the Announce only feature, you may want to change your outgoing message not to prompt the caller to leave a message. However, the prerecorded message changes automatically. You have three record time options. The options "One minute" or "Four minutes" set the duration for recording the incoming messages.
EXAI7248.book 36 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Setting the Message Alert Tone Message Alert feature lets you know you have new messages by sounding a short beeping tone. If you set the Message Alert to on when a new message is received, the alert tone will sound every 15 seconds. 1) With the phone in standby mode, press the menu/clock key five times. You hear "Message alert" and the current setting ([ ] Off or [ ] On), and it is displayed on the base.
EXAI7248.book 37 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Selecting the Language The answering system voice announcements can be heard in English, French or Spanish. To choose the language of the answering system voice announcements: 1) With the phone in standby mode, press the menu/clock key six times. You hear the announcement "Language, English" followed by the voice prompts for setting the language. The current setting ([ ], [ ] or [ ]) appears on the base.
EXAI7248.book 38 ページ ２００４年１月１５日 木曜日 午前１１時５６分 ▼Recording a personal outgoing message (Greeting) 1) Press and hold the greeting key in standby mode. You hear the announcement " Record greeting" and a confirmation tone. [ ] flashes on the message counter. 2) Start recording your message. You have 30 seconds, and the message counter starts to count down [ ] to [ ] every second. 3) When you are finished recording your greeting, press the greeting, (play/stop) or set key.
EXAI7248.book 39 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Setting the Base Ringer Volume note Although you have set the base ringer to off, you will still hear the ringer from the handset on the base if its ringer is on. You will hear three ringer options. One allows you to turn the ringer off. The other two are volume levels. You can change the ringer volume while in standby mode or the incoming call is ringing. 1) Press the ringer key.
EXAI7248.book 40 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Using Your Answering System The message counter displays the number of messages stored in memory. If the display flashes, new messages are waiting for you. The flashing number represents the number of new messages, not total messages. The cordless phone plays the new messages first; after all the new messages are played, you can play the old messages.
EXAI7248.book 41 ページ ２００４年１月１５日 木曜日 午前１１時５６分 3) After you have reviewed your new messages, you can play your old messages by pressing the (play/stop) key again. Once you have listened to a new message, it becomes an old message. The old messages will be played in the order in which they were received. Reviewing Messages using Handset 1) With the phone in standby mode, press the select/remote key on the handset. R emot e Answ eri ngM ach ine op era tio n appears on the display.
EXAI7248.book 42 ページ 3) Press the standby. ２００４年１月１５日 木曜日 午前１１時５６分 (play/stop) key at any time to stop reviewing messages and return to Skipping a Message 1) With the phone in standby mode, press the The number of messages is announced. (play/stop) key to review your messages. 2) Press the (skip/ff) key at anytime to skip to the next message. Each time the (skip/ff) key is pressed, the system scans forward one message.
EXAI7248.book 43 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Deleting a Message To maintain maximum record time, delete the old messages. When you press the (delete) key, you are permanently deleting the message. Once deleted, the message cannot be replayed. 1) Press the 2) Press the to delete. (play/stop) key to review your messages. (delete) key anytime during the message 3) You hear a confirmation tone and the message is deleted. You can also delete all the messages.
EXAI7248.book 44 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Voice Memo The voice memo function allows you to record messages as shorts as two seconds and as long as four minutes. 1) With the phone in standby mode, press and hold the memo rec key. You hear an announcement “Record memo message” and a tone. [ ] flashes on the message counter. 2) Start your recording. 3) When you have finished, press the (play/stop), memo rec or set key to stop recording. You hear a confirmation tone, and the system returns to standby.
EXAI7248.book 45 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Remote Operation tip For your convenience remote operation cards are provided for you to use while away from home (located in the back of this manual). You can operate your answering system from a remote location (when you are away from home, or from another room using a handset). Use this function to check for recorded messages, to play or delete message. When using any touch-tone telephone, you can even record a new greeting message.
EXAI7248.book 46 ページ ２００４年１月１５日 Command 0 then 1 0 then 2 0 then 3 0 then 4 0 then 5 Function Repeat a Message Play Incoming Messages Skip a Message Delete a Message Stop Operation 木曜日 午前１１時５６分 Command 0 then 6 0 then 7 0 then 8 0 then 9 1 then 0 Function Answering System On Memo Record/Stop* Greeting Message Record/Stop* Answering System Off Voice Prompts *For Memo Record and Greeting Message Record function, the first time you enter the corresponding command, it starts the Recording function.
EXAI7248.book 47 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Turn on the Answering System Remotely If you have forgotten to turn on your answering system, you can turn it on remotely from any touch-tone telephone. 1) Call your telephone number. 2) Wait ten rings until the system answers. You hear intermittent beeps. 3) Press 0 and then enter your PIN code. The answering system announces the number of messages stored in memory. You hear "To play incoming messages, press zero two. For help, press one zero.
EXAI7248.book 48 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Remote Access with the Handset You can operate your answering system from another room using a handset. • If you press the end key before the answering system answers, the phone will return to standby. • If the answering system does not answer within five seconds, you hear beeps and the phone will return to standby. • The base's keypad is disabled during remote operation. • If you receive a call, the remote operation is canceled.
EXAI7248.book 49 ページ ２００４年１月１５日 木曜日 午前１１時５６分 4) After the command has finished, you hear intermittent beeps indicating that the system is in the command waiting mode. You may enter another command at this time from the chart above. 5) When you are finished, hang up to exit the system. The answering system automatically returns to standby. www.uniden.
EXAI7248.book 50 ページ ２００４年１月１５日 木曜日 午前１１時５６分 To protect you against misbilled calls which might result from your phone being activated by other equipment, the cordless phone provides AutoSecureTM (which electrically locks your phone when the handset is in the base) and Random CodeTM digital security which automatically selects one of over 262,000 digital security codes for the handset and base.
EXAI7248.book 51 ページ ２００４年１月１５日 木曜日 午前１１時５６分 ADDITIONAL INFORMATION Note on Power Sources Low battery alert When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, L ow Bat ter y appears on the LCD and none of the keys will operate. If the phone is in use, Low Ba tte ry flashes and the handset beeps.
EXAI7248.book 52 ページ ２００４年１月１５日 木曜日 午前１１時５６分 To maintain a good charge, clean the charging contacts on the handset once a month. Dampen a cloth with plain water. Gently rub the damp cloth over the charging contacts until all visible dirt is removed. Dry the contacts thoroughly before returning the handset to the base. Caution Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish. www.uniden.
EXAI7248.book 53 ページ ２００４年１月１５日 木曜日 午前１１時５６分 ADDITIONAL INFORMATION General Information The phone complies with FCC Parts 15 and 68. Operating temperature: -10°C to +50°C (+14°F to +122°F) AC Adapter Information AC Adapter part number: AD-314 Input Voltage: 120V AC 60Hz Output Voltage: 9V DC 350 mA Battery Information Battery part number: BT-905 Capacity: 600 mAh, 3.6V Frequency 924.516925 - 926.704425 MHz 2,405.155942 - 2,411.
EXAI7248.book 54 ページ ２００４年１月１５日 木曜日 午前１１時５６分 If your phone is not performing to your expectations, please try these simple steps first. Symptom Suggestion The charge in use LED won't illuminate when the handset is placed in the base. • Make sure the AC adapter is plugged into the base and wall outlet. • Make sure the handset is properly seated in the base. • Make sure the charging contacts on the handset are clean. The audio sounds weak and/or scratchy.
EXAI7248.book 55 ページ ２００４年１月１５日 木曜日 ADDITIONAL INFORMATION Symptom 午前１１時５６分 Suggestion The handset doesn't ring or receive a page. • The battery pack may be weak. Charge the battery for 15-20 hours. • The handset may be too far from the base unit. • Place the base unit away from appliances or metal objects. • Change the digital security code (see page 50). • Check the battery pack to ensure there is a secure connection. • Make sure ringer volume isn't set to turned "off.
EXAI7248.book 56 ページ ２００４年１月１５日 午前１１時５６分 Suggestion After a power failure, the outgoing message is deleted. • Record your personal outgoing message again. The default message should remain. No sound on the base unit speaker during call monitoring or message playback. • Adjust the speaker volume on the base unit. ADDITIONAL INFORMATION Symptom 木曜日 Cannot access remote call-in • Make sure you're using the correct PIN code.
EXAI7248.book 57 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Moisture and liquid can damage your cordless phone. In case of accidental submersion, please follow these steps. Case Action If the handset or base is exposed to moisture or liquid, but only affects the exterior plastic housing. Wipe off the liquid, and use as normal. If moisture or liquid has entered the plastic housing (i.e., liquid can be heard in the phone or liquid has entered the handset battery compartment or vent openings on the base).
EXAI7248.book 58 ページ ２００４年１月１５日 Before you read anything else, please observe the following: Warning! Uniden America Corporation DOES NOT represent this unit to be waterproof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture. Rechargeable Nickel-Metal-Hydride Battery Warning •This equipment contains a rechargeable nickel-cadmium battery. •Cadmium is a chemical known to the State of California to cause cancer.
EXAI7248.book 59 ページ ２００４年１月１５日 The FCC has granted the telephone company the right to disconnect service in the event that your phone causes problems on the telephone line. Also, the telephone company may make changes in facilities and services which may affect the operation of your unit. However, your telephone company must give adequate notice in writing prior to such actions to allow you time for making necessary arrangements to continue uninterrupted service.
EXAI7248.book 60 ページ ２００４年１月１５日 木曜日 午前１１時５６分 TERMINAL EQUIPMENT NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.
EXAI7248.book 61 ページ ２００４年１月１５日 A AC adapter information . . . . Announce only feature . . . . Answering system Deleting a message . . . . . Playing a message . . . . . Recording a conversation . Remote access . . . . . . . . Repeating a message . . . . Skipping a message . . . . . Turning on/off . . . . . . . . B Basic setup . . . . . . . . . . . Battery pack Information . . . . . . . . . . Installing . . . . . . . . . . . Preparing and charging . . Replacement and handling Beltclip installation . . . .
EXAI7248.book 62 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Memo www.uniden.
EXAI7248.book 63 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Memo [63] www.uniden.
EXAI7248.book 64 ページ ２００４年１月１５日 木曜日 午前１１時５６分 Remote Operation Card C U T C U T REMOTE OPERATION CARD MEMORY LOCATION MEMO Remote access away from home Turn on the answering system remotely 1. Call your phone number from a touch-tone phone. 2. During the outgoing message, press 0 and enter your PIN code. The answering system announces the number of messages stored in memory and the voice prompts. The phone stands by for you to enter a command. 3. To quit, hang up the phone. 1.
EXAI7248.
EXAI7248.book 66 ページ ２００４年１月１５日 木曜日 午前１１時５６分 At Uniden, we'll take care of you! If you need any assistance with this product, please call our Customer Hotline at or visit our web site at www.uniden.com 1-800-297-1023 PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE. Our Uniden representatives will be happy to help you with any matters regarding the operation of this unit, available accessories, or any other related matters. Thank you for purchasing a Uniden product.
exai7248yousi04.eps R IE S, M @ FO OR E CO S N . LI EN ES CC ON ID A O N .U G W W W R E G I S T E R O N L I N E T O D AY ! T H A N K Y O U F O R B U Y I N G A U N I D E N P R O D U C T. ©2004 Uniden America Corporation, Fort Worth, Texas. Contains additional foreign articles. Custom manufactured in China.
