BT229 Bluetooth® Headset User’s Guide Also in this package: AC (indoor) power adapter Extra ear cushion Questions? Problems? Get help on the web at www.uniden.com or call our Customer Service line at 800-292-2294.
Getting to Know the Headset What the LED colors mean Color Red Blue Red & blue Meaning The headset is currently Steady charging. When the battery is fully charged, the LED turns off. The headset is turned off. If the Flashing headset is also beeping, the battery is low. Flashing The headset is turned on. The headset is in standby 1 flash every 5 and not paired to a Bluetooth seconds device. 2 flashes every The headset is currently paired 5 seconds to a Bluetooth device.
What the buttons do The headset initiates the function only after the button is released. Press it to Press & hold it for 2 seconds to Multi-function button (MFB) In standby: Redial the most recently dialed number. During an incoming call: Answer the call. During a call: Hang up. In standby: Activate voice dialing. Turn the During an incoming call: Reject the call. headset on During a call: Transfer the call to your or off. phone (or back). Press it to Volume Up During a call: Increase the call volume.
Setting Up Your Headset Charge the battery ► Before using your headset, charge the battery until the red LED is solid on (about 2 hours). Charging the battery completely (and keeping it charged) will help you get the longest possible talk and standby time out of the battery. ► Connect the adapter to the power connector on the top of the headset, then plug it into any standard 120 V AC (regular indoor) power outlet.
1) Make sure the headset is powered off and the power adapter is not connected (you can’t use the headset while it’s charging). ) Press and hold MFB until the LED flashes alternating red and blue (approximately 6 seconds), then release. The headset is in pairing mode and should be visible to other Bluetooth devices. ) On your phone, start a search for Bluetooth headsets or handsfree devices.
Connect to your phone Most phones connect to the headset as soon as you pair it; if yours won’t, turn the headset off and back on. If headset still won’t connect, check your phone’s owner’s manual for additional Bluetooth information. Once the headset is paired: ► Whenever you turn the headset on, it will automatically try to connect to whatever device it was connected to last. ► If the headset loses the connection (e.g., if your phone is out of range), it should reconnect automatically.
Put your headset on Place the Insert the ear cushion, then hook behind wrap the earhook behind your your ear. ear. Everyone’s ear has a sweet spot, a particular angle Put the of the speaker where the cushion in audio comes in loud and your ear. clear. Take a few minutes to move the headset around until you find the best angle for the ear cushion. Wearing the headset on your left ear: If you want to wear the headset on your left ear, take the earhook off and turn it over.
Available Features After the headset is connected, you can use the following features: Make a call Make the call from your mobile phone as usual; your phone should automatically send the call to the headset; if it doesn’t, press and hold MFB for 2 seconds to send the call to the headset manually. Answer a call While the phone is ringing, press MFB. End a call Press MFB. Reject an While the phone is ringing, press and hold MFB for at least 2 seconds.
Call Waiting To use this feature, you must subscribe to Call Waiting through your service provider, and your phone must support the hands-free profile. ► To put your current call on hold and switch to a waiting call, press and hold Up until you hear 3 beeps (about 4 seconds). When you release the button, you’ll be connected to the waiting call. (Press and hold Up again to switch back to the original call.) ► To hang up your current call and switch to a waiting call: press and hold Down for about 4 seconds.
Using the Multipoint Function The headset supports simultaneous connection with 2 mobile phones with full control of each one. (This feature may not be compatible with some mobile phones.) Pairing to more than one phone Pair the headset to the first phone following the instructions on page 6. When you hear a high-pitched, short double-beep, pair the headset to the second phone. Using both phones ► The headset stays connected to both phones until a call comes in.
Troubleshooting and Maintenance If you have problems with the headset, see the suggestions in the table below. If these suggestions don’t help, contact customer support (see the cover for contact information). If... The headset won’t turn on. Try... • Charging the battery completely. • Making sure your phone is in pairing mode. Check your phone’s manual for The headset won’t pair with instructions on Bluetooth device pairing. • Turning the headset off. Wait at least 10 seconds, then try again. my phone.
General Information • You cannot use the headset while it is recharging. • Bluetooth wireless devices have a maximum range of 30 feet (10 m); the actual range varies depending on current conditions (obstacles, battery power, interference, etc.). • The headset can be connected only to devices that support the Bluetooth headset or hands-free profile. This product is not compatible with standard cordless phones.
Safety and Handling Information For maximum product life, do not drop, throw, or crush the headset. Do not expose it to humidity, dust, or temperatures above 125 F. Cleaning the headset • If necessary, remove the earhook. Dampen a lintfree cloth with water or a cleaner specially designed for electronics, and gently wipe the headset clean. • Do not expose this product to liquid (water, alcohol, etc.) or submerse in liquid for any reason.
• Use only the power cord and batteries indicated in this manual. Do not expose the battery (or the device) to flames or dispose of it in a fire: the battery may explode. Check with local authorities for possible battery disposal instructions. • Do not disassemble, modify, or attempt to repair any component of this product. • Check the laws and regulations on the use of mobile phones and hands-free equipment in the areas where you drive.
interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with IC RF exposure compliance requirements, please follow operation instruction as documented in this manual.
programmed by anyone other than as detailed by the owner’s manual for this product. STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any time while this warranty is in effect, warrantor will either, at its option, repair or replace the defective unit and return it to you without charge for parts, service, or any other cost (except shipping and handling) incurred by warrantor or its representatives in connection with the performance of this warranty.
