User Manual

USER MANUAL

Congratulations on your purchase of the Vibe-Tribe

Fever-01 Bluetooth Speaker.

This manual explains how to correctly install,

operate and get the best performance from your

Fever-01. Read this guide carefully before the usage,

then keep it near it for quick reference.

MAIN FEATURES

Dimensions/Weight: Ø60x53 mm - 215g

Output Power: 6W RMS S/N Ratio: >=90dB

Battery: Li-Ion 1100mAh Battery Life: 8hr

Audio Sources: Wired from any standard jack output

device, Wireless from Bluetooth enabled devices, FM Radio with

built-in Antenna, Micro-SD (max 32 GB) slot for MP3-WAV-

WMA files

Microphone: Build-in Mic with noise cancellation for Hands

Free call.

Bluetooth Version: V4.0 with NFC for easy pairing

Bluetooth Profiles: Advanced Audio Distribution Profile

(A2DP), Hands-Free Profil(HFP), Audio Video Remote Control

Profile (AVRCP)

WARNING & CAUTIONS

Important to ensure your personal safety and prevent

property damage.

• Charge Fever completely before using it for the first time.

• Use only the manufacturer supplied cable to charge your Fever. Other

cables could damage Fever.

• Do not attempt to repair, modify, or disassemble your Fever yourself,.

• Do not insert anything into your Fever. This may damage the internal

components.

• Do not expose your Fever to liquid, moisture, humidity, or rain to avoid

any risk of electric shock.

• Do not attempt to replace your Fever battery, it is built-in and is not

changeable.

• This device contains magnets. Keep credit cards, memory cards etc

away to avoid damage.

Keep this owner’s guide together with your sales receipt

for assistance and warranty.

PAGE 1
USER MANUAL Congratulations on your purchase of the Vibe-Tribe Fever-01 Bluetooth Speaker. This manual explains how to correctly install, operate and get the best performance from your Fever-01. Read this guide carefully before the usage, then keep it near it for quick reference.
PAGE 2
START WITH FEVER POWER ON: Long press to switch between ON and OFF. MODE SELECTION: Select the MODE by pressing the M Button or inserting a Micro-SD. POWER LED: near the micro USB • Red light Indicates that Fever is in charge mode through USB 5V. • Green light indicates that Fever is fully charged. BLUETOOTH LED: bottom left. • Blinking Blue: Bluetooth search mode • Steady Blue: Connected via Bluetooth • Light Off: LINE IN, Micro-SD card reader or FM Radio mode. See Mode LED MODE LED: bottom right.
PAGE 3
Line-In MODE Connect the 3,5” jack audio source to the microUSB port of Fever. Short Press the “M” button until Fever switches to Line-IN mode (Mode LED red). Red light on.
PAGE 4
3. NOT LOUD ENOUGH? Make sure Fever is charged up and urn up the volume on your device AND on your Fever. When connected via Bluetooth ®, it’s best to turn the volume on your Fever fully up and then use ONLY your device to control the whole range of volume. 4. PROBLEMS WITH Micro-SD CARD? - Make sure your Micro-SD card has a capacity < 32GB and files are MP3, WAV and/or WMA - Make sure that the “Micro-SD card Reader” operational mode has been selected. 5.