Instruction Manual for Digital Photo Frame Minimum System Requirements: Hardware: PC with Intel Pentium 4 128 MB RAM 50 MB Hard Drive Space CD-ROM Drive Software: Microsoft Windows XP with internet connection Digital Photo Frame – PC Link (included in the supplied CD) IMPORTANT INFORMATION DO NOT CONNECT YOUR DIGIT PHOTO FRAME TO YOUR COMPUTER UNLESS YOU HAVE READ THOROUGH THIS INSTRCUTION MANUAL. FAIL TO DO SO MAY RESULT IN PRODUCT DAMAGE. THIS IS NOT A USB STORAGE DEVICE.
1 Main Features: Digital Photo Frame Clock with calendar Daily Alarm Auto power off 1.
2.3 Mode There are 4 modes: Clock, Alarm, Gallery and Setup. Press MENU key to switch between each mode Clock -> Alarm -> Gallery -> Setup 2.4 Clock 12:00 01 /JAN A Mon Time, date and week will be shown on clock mode In case if the Alarm is turned on, a right corner. icon is appeared on the top 2.4.1 Setting Date and Time In CLOCK mode, press and hold the CONFIRM key for 2 seconds to edit Year digits flashing.
12:00 A 01 / JAN Press UP or DOWN key to select minute. Press CONFIRM key to confirm minute. Then go back to clock mode. 12:00 01 /JAN 2.5 Alarm A Mon In CLOCK mode, press MENU key one time to enter ALARM mode. 12:00 2.5.1 A Setting Alarm Press and hold CONFIRM key for 2 seconds to edit the alarm time. 12:00 A Hour digits will flash together with the AM/PM mark. Press UP or DOWN key to select hour. Press CONFIRM key to confirm hour. Then start set minute 12:00 A Minute digits will flash.
12:00 01 /JAN A Mon Press any key to stop the alarm tone. 2.6 Gallery stop flash. In Alarm mode, press MENU key one time to go to Gallery. When no photo is stored inside the device, “No photo!” will display. No photo Please Connect to PC to update pictures If auto scroll is selected, then each photo will display for 10 seconds and then change to another photo. If manual scroll is selected, press LEFT or RIGHT to view another photo. 2.
Press UP or DOWN key to select between auto scroll and manual scroll. Press CONFIRM to confirm. Press CANCEL/RETURN to ignore save and exit to previous screen. 2.8.2 Auto Sleep If there is no any button pressed for a certain time, the unit will enter sleep mode – LCD turned off to save power. When the unit is in auto-sleep mode, press and hold ON/OFF key to wake up. The unit will resume Clock mode after wake up.
WARNING: 1. DON’T DIRECTLY READ/WRITE TO THIS DEVICE USING OTHER PROGRAM. ONLY USE THE PC PROGRAM PROVIDED TO DOWNLOAD PICTURE TO THE PHOTO FRAME. 2. DON’T FORMAT THIS DEVICE; OTHERWISE THE UNIT WILL BE DAMAGE!!! 2.9 USB MODE Once the USB cable is plugged, it will enter USB mode and show the below screen. USB Power USB Update Press UP or DOWN key to select USB Power or USB Update. Press CONFIRM to confirm. 2.9.1 USB POWER If USB Power is selected, the unit will use the USB power as the unit power supply.
3 3.1 3.2 Running the PC Program • • Installation Insert the CD to the CD drive. Installation software will start automatically. If your CD does not have autorun, go to the setup directory and double click “Setup.exe” to start. The setup program will guide you through the installation procedure. Shortcut will be created on Desktop and Start Menu. • Uninstall You can uninstall the program by clicking on the “Uninstall Photo Viewer” shortcut.
Click to clear default selection area. Select any portion of the photo by click and drag with the mouse to add the selected photo to the right panel. (but still not Click physically downloaded to the device yet) Click “Synchronize” to process and download all photos in the right panel to your photo frame device. “Photo Viewer data synchronize complete” will be prompted to indicate the download has been completed. Unplug the USB cable to resume normal function.
) This supply terminal is not to be short-circuited. 11) Incorrectly using batteries can cause them to burst or leak, possibly damaging the interior of the unit. 12) Do not expose battery to direct heat, let them become shorted, or try to take them apart. 13) Only batteries of the same or equivalent type are to be used. Do not mix alkaline, standard (zinc carbon), or re-chargeable (nickel cadmium) batteries. 14) Replace whole set of batteries at one time, do not mix old and new batteries.
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
