Any Time, Anywhere Unication is committed to Provide You the Best Solution G4 Voice Pager Supports P25 Radio Systems Now! Voice Pager Specially ecially Designed for Public Safety Advanced dvanced Radio Performan Performance Mission ission Critical Applications Application ional GSM Features Availa Optional Available ,I \RX KDYH DQ\ UHTXLUHPHQWV SOHDVH FDOO RXU WROO IUHH QXPEHU ZZZ XQLFDWLRQ FRP US-G4-FF-20150126-V1
INDEX Part A: G4 Specifications and Features 1 Part B: Pager Overview 4 B1 Pager Appearance 4 B2 LCD Display 5 B3 LED Introduction 5 B4 Icon Introduction 6 Part C: Operation Introduction 7 C1 Initial Use 7 C2 Pager Message Box 8 C3 Function status 9 C4 Voice Memo Box 11 C5 All Band Scan 12 C6 Function Setting 13 C7 Information 15 C8 Diagnostic 16 Part D: Warning and Important Notes 17
Part A. G4 Specifications and Features G4 Digital Trunking and Analog Voice Pager Specification & Feature A1 Operating Environment a Operating Temperature Range -30 to + 60°C ESD (Electrostatic Discharge) contact ± 8KV Air ± 15KV Physical Operating Environment Analog (AM / FM) Digital (TDMA / FDMA) Available Modulation Type b Digital and Analog identify modulation type and decode protocol automatically at the same time.
Part A. G4 Specifications and Features G4 Digital Trunking and Analog Voice Pager Specification & Feature A2 Hardware Specification e LED LED Type (monochrome / multicolor) : red / green / blue / orange Blue - Power on / Connected with USB cable / Charging completed Flash Blue - Charging Message LED: No Brightness – No signal Red - Receiving voice call or data call Frequency Setting Channel Spacing Narrow Band :10/12.
Part A.
Part B. Pager Overview B1. Pager Appearance Front View Side View Rear View 1 12 13 15 2 3 16 3 4 5 14 6 7 Top View 9 11 8 10 Accessories Belt Clip USB Cable Lithium Ion Battery Pack 4 NO.
Part B. Pager Overview B2. LCD Display Status Bar Text Area Tool Bar B3. LCD Introduction Power LED Message LED Power LED: NO. Entity Key Description 1 Blue Power on process USB cable is connected to G4 and charging is completed. 2 Flash Blue Charging Message LED: NO.
Part B. Pager Overview B4. Icon Introduction Status Bar Icon NO. Item Icon Description 1 RF Strength RF signal strength. 2 Out of Range Signal is out of range. 3 Message Hint Unread message icon indication. 4 Time Display Time display (24 hour clock). 5 Off Duty Status Off duty status. 6 On Duty Status On duty status. 7 Bluetooth Bluetooth is activated. 8 Bluetooth Headset Bluetooth earphone is connected. 9 USB cable USB cable is connected.
Part C. Operation Introduction C1. Initial Use Install Battery 1 Turn the screws and remove the battery cover. 2 Insert the battery pack into G4. 3 Replace the battery cover and and tighten the screws. Battery Charging Insert the battery so that the connector pins align with battery contacts of the G4. Power On G4 has its own customized lithium Ion battery, it can be charged by mini USB cable. After the battery installed , turn the volume knob clockwise to turn on G4.
Part C. Operation Introduction Main Menu 1. In Standby Mode, press the “K1” soft key to enter the Main Menu. 2.Press the “Home” key to go back to Standby Mode. C2. Pager Message Box View and Manage Text Message Records in Message Box. 1. Enter Message Box: Use the Navigation Key to select Message Box in the Main Menu. 2. Operation: A. Use the Navigation Key to select Message. B. Press the "K1" Key to read highlighted message. C. Press the “K2” Key to lock/unlock highlighted message.
Part C. Operation Introduction C3. Function status Enter Function Status: Use the Navigation key to select Function Status in the Main Menu. Basic Operation: Use the Navigation Key to select features to set. 1. Select Zone: Press the "K1" Key to enter setting screen. Use the Navigation Key to select Zone and then press the “K1” Key to confirm. Press the “K2” Key to save. You can press the “K4” Key to check detailed information of highlighted Zone. 2.
Part C. Operation Introduction 3. Bluetooth: Bluetooth Device: Press the "K1" Key to enable or disable the feature. Connect Bluetooth Earphone: Press the "K1" Key to start searching for the Bluetooth Earphone devices. Connect another Bluetooth Device: Press the “K1” to start searching for Bluetooth devices other than earphone. If only a Bluetooth device is found, the G4 starts pairing to the device. The G4 shows the pairing status on the screen.
Part C. Operation Introduction C4. Voice Memo Box View and Manage Voice Memo in Voice Memo Box. 1. Enter Voice Record Box: Use the Navigation Key to select the Voice Memo Box in the Main Menu. 2. Record a New Voice Memo: If there is no voice memo, press the “K1” Key to start recording. A. Press the “K1” Key to pause. B. Press the “K4” Key to save the voice memo. C. Press the “K1” Key to set the voice memo as Alarm. D. Press the “F2” Key to back to Voice Memo box. 3.
Part C. Operation Introduction C5. All Band Scan Set a range to scan, or view the scanned channel list. 1. Enter Voice Record Box: A. Use the Navigation Key to select All Band Scan in the Main Menu. B. Use the Navigation Key to select a feature, and press the “K1” key to enter. C. Press the “K1” Key to set the voice memo as Alarm. D. Press the “F2” Key to back to Voice Memo box. 2. Start a New Scan: Set scan range, band and frequency step. A. Use the Navigation Key to move. B.
Part C. Operation Introduction C6. Function Setting View and manage pager basic function. Enter Function Status: Use the Navigation Key to select Function Setting in the Main Menu. Basic Operation: Use the Navigation Key to select function. Press “K1” Key to start setting. 1. Zone: Please refer C2-1 to get detailed information. 2. Alert Tone Volume: Use the “K1” Key to adjust the pager tone volume. A. Operation Allowed: Operation successed. B. Operation Succeed: Message received. C.
Part C. Operation Introduction 4. Backlight Dim Time: Adjust screen backlight dim time. A. Use the Navigation Key to move. B. Press the “K1” Key to make highlighted value +5. C. Press the “K2” Key to make highlighted value +1. D. Press the “K3” Key to make highlighted value -1. E. Press the “K4” Key to save. 5. Date & Time: Adjust Time of pager. A. Use the Navigation Key to move. B. Press the “K1” Key to make highlighted value +5. C. Press the “K2” Key to make highlighted value +1. D.
Part C. Operation Introduction 8. Ring Mode: Select Ring mode. There are 5 modes: Tone: Tone only. Vibrate: Vibrate only. Silent: Mute mode. Vibrate then tone: Vibrate first then tone. Tone and Vibrate: Both. A. Use the Navigation Key to move. B. Press the “K1” Key to select. C. Press the “K4” Key to save. C7. Information View the Pager information. 1. Enter Information: Use the Navigation Key to select Information in the Main Menu. 2.
Part C. Operation Introduction C8. Diagnostic View the radio signal strength. 1. Enter Message Box: Use the Navigation Key to select Message Box in the Main Menu. 2. Read Information: A. Rpt Name: Name of repeater B. RSSI(dBm): Radio Signal Strength Indicator. C. Protocol: Using Protocol of current channel. D. Frame Error: Received signal error radio. E. Others: Refer to channel setting.
Part D. Warning and Important Notes Notice : The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Important Note : To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device.