User 's Manual Models CL-30, Amplified DECT Cordless Telephone With Talking CID & Talking Keypad (CL- 30 = 40 dB ) Thank you for purchasing this product, please read before use (Keep this manual for future reference)
CONTENT 1 Product Features 2 Important safety instructions 3 Package content 4 Installation 5 Detailed features and controls 6 Answering a call 7 Making a call 8 Receiver volume control 1 (Amplify) function 7 9 2-3 4 4 5-6 7 7 7 10 Receiver tone control 7-8 Function, Talking function & 11 Automatic Language Switches 12 Programming one-touch memories 8 8 13 Dialing from a one-touch memory 14 Change handset ringer tone and volume 15 Register a new handset to base 16 De-register all handsets 17 Diali
PRODUCT FEATURES Important Safety Instructions 1. DECT 6.0 Technology ensures crystal clear conversation 2. Up to 55 dB Of amplification for CL-65 (40 dB for CL-30) Instructions pertaining to a risk of fire, electric shock or injury to persons. Privacy of communications may not be ensured when using a cordless phone. 3. "AMPLIFY"key that automatically returns to the last receiver Caution: To maintain compliance with the FCC’s RF exposure volume setting 4. Four (4) digital tone control settings 5.
12. To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. 13. Avoid using any telephone product during an electrical storm. There may be a remote risk of electric shock from lightning. 14.
Detailed Features and Controls 5. button: Press to end a call. 6. Auto-Amplifier Switch: Enables automatic function. (6, 7 & 7B are located in battery compartment). 7. Talking CID/ Keypad Switch:Enables Talking CID and Talk -Back feature 7B. Language Switch: Select either English or French voice output. 8. Keypad: Standard phone keypad 9. (Amplify) button with indicator: Press to engage extra handset receiver amplification. 10. button: Press to make or answer a call.
Answering a call 1. Press (Press 2. Press key when phone rings. again to engage speakerphone if need). key to end the call. Making a Call 1. Enter phone number on keypand . 2. Press (Press 3. Press Pressing repeatedly means changing from T1 toward T4. A long beep indicates the highest tone setting has reached (T4). You should stop pressing. key to go on-line and dial. Pressing repeatedly means changing from T4 toward T1. A long beep indicates the lowest tone setting has reached (T1).
Dialing from a One-Touch Memory 1. While off-line, press any one-touch memory key to hear audio confirmation (assume talking feature is on). 2. Press to go on-line and dial. 3. Press to end the call. Change Handset Ringer Tone and Volume Note: Base ringer ton e is fixed. Base ringer volume is controlled by a slide switch located on the side of the base. Ringer tone or melody setting 1. While of f-line, press 2. Press the key plays the current ringer melody.
Out-Of-Range Warning Tone Intercom Between Handsets While talking, there will be a long beep sound if the handset is out-of-range from the base. Please walk back toward the base immediately to remedy the situation. 1. This function is available when two or more handsets are registered to the same base. The handset that came with each system is HANDSET 1 (HS 1). Each subsequent handset added to the system is automatically assigned as HS 2, HS 3,HS 4 and HS 5.
Specification Conference Call This allows two handsets conferencing with the incoming caller. 1. On Handset 1, press key to answer the incoming call. p age key and then press "2"on 2. On Handset 1, press the keypad to page Handset 2. (This also places the caller on HOLD.) 3. On Handset 2, press ke y to answer the page. 4. On Handset 1, press key to init iate conferencing. Both Handset 1 and Handset 2 are now connected to the outside caller. 5.
Q3: No Dial tone. Warranty Service Information Ans: Check AC adapter and phone cord connection. Make sur e the handset is not powered off. If this is a brand new handset, you must register it to the base before using. Your CL Cordless Phone comes with one-year limited warranty. We warrant during this warranty period, from the date of purchase, to the original consumer, the CL Cordless Phone to be free from defects in materials and workmanship under intended home use.
www.sereneinnovations.com to obtain a Return Authorization Number (RAN) and shipping instructions before shipping the product to us. Any shipment without a RAN will not be accepted and will be returned to you at your expense. Any authorized returned product must be accompanied with proof of purchase Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper functioning of your equipment.
Part 15 of FCC Rules Information Modification: Any modification not expressly approved by the This device complies with Part 15 of the FCC rules.Operation manufacturer of this device could void the user's authority to is subject to the following two conditions: (1) This device may operate the device. not cause harmful interference, and (2) this device must NOTICE:The Industry Canada label identifies certified equipment .
inspections authority, or electrician, as appropriate. The REN for this amplified telephone as stated on the IC regulatory label located on the bottom of the product. NOTICE: The Ringer Equivalence Number (REN) assigned to each terminal device provides an indication of the maximum number of terminals allowed to be connected to a telephone interface.
