96/81/2088 09:55 6269656998 UNCIAL PAGE. 82/82 2 NORTHWESTERN BELL PHONES Distributed Exclusively Widower by UNCIAL ENTERPRISES, INC. 16940 Gale Avenue, City of industry, CA 91748 (626) 965-5588 Fax: (626) 965-6998 FCC ID: Subj.: Digital Security Code: The Model has the circuitry for digital security code to provide protection against unintentional access. Fro each model, one of 1,048,576 kinds of digital security code is randomly selected and fixed in each telephone as it is manufactured. prides, Inc.
BELL Phones BY NORTHWESTERN BELL PHONES Excursion® 39606 Congratulations on your selection of the Excursion® 39606 from Northwestern Bell Phones. This quality 900MHz cordless telephone all digital answering system, like all Genuine BELL® products, has been designed to give you many years of continuous service and represents the best value for your money. It requires little maintenance and is easy to setup and operate.
EXCURSION 39606 MANUAL FEB 21, 2000 FCC INFORMATION we. PAGE 4 HANDSET CONTROL-CORDLESS PAGE § HANDSET CONTROL-ANSWERING PAGE 6 BASE UNIT CONTROL ..coovrrinnsiisicinnarerscssen ~PAGE 7 INITIAL SETUP ...virulence overmastered PAGE 8 TELEPHONE PAGE 8 MEMORY DIALING +o «PAGE 8 CHANNEL SELECTION .ccnivvnmnieorininnsnasisininins PAGES ANSWERING MACHINE OPERATION PAGE 8 REMOTE OPERATION ..
IMPORTANT SERVICE INFORMATION Read this manual before attempting to setup or Use this instrument. It contains important information regarding safe installation and use. Keep this manual for future reference. Also save the carton, packing and proof of purchase to simplify and accelerate any needed assistance. If you need assistance or service, call (800) 888-8990 between 8:00 a.m, and 4:30 p.m. Pacific Standard Time, Monday through Friday. You can alas visit our web site at .
11. To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified service contractor when some service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 12.
12. For the Base Unit: Charge the batteries provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual, 13. For the Base Unit: Observe proper polarity orientation between the batteries and battery charger, SAVE THESE INSTRUCTIONS Astoria PRECAUTIONS 1. Never install telephone wiring during a lightning storm. 2. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. 3.
HANDSET CONTROLS — Cordless Telephone TALK vos ANTENNA RING ON/OFF SWITCH: Turns the handset ringer ON or OFF, TALK BUTTON: Press to answer an incoming call or to place a call. Press to end a call, MEMO BUTTON: Used to store up to 10 telephone numbers into memory and you can then dial any of the stored phone numbers. TONE BUTTON: Used to temporarily change the dialing mode from pulse to tone for rotary service.
138 12. 13. 14. RE/PA {Redial/Pause} BUTTON: Automatically dials the last number called up to 31 digits. Also used to insert a four-second delay in dialing sequence, SCAN BUTTON: Allows you to change channels if the current channel is noisy or having interference from other sources. Charge Contacts: Used for charging the handset battery. Microphone; Used for speaking with callers, or recording OGM and MEMO messages remotely.
7. REMOTE button: Allows you to access most of the 39606’s functions away from the base unit using the handset. 8. ERASE button: Press to erase messages. 9. OGM button: Press to playback outgoing message. 10. RPT button: Press to repeat the message being played. 11. ANSWER ON button: Press to activate answer function. 12. ANSWER OFF button: Press to deactivate answer function. 13. SKIP button; Press to skip to the next message during playback. 14. MEMO PLAY button: Press to playback memo messages. 15.
090 On 14. 15. activate the Toll saver (TS) feature. Volume control: Adjusts the base unit speaker volume level, PAGE (PH REC) button: Allows to page the handset, or to record the two way record during talking. MEMO PLAY button: Press to playback the memo message. PLAY/STOP button: Press to playback the messages or to stop current activity. ERASE button: Press to erase all messages or to erase 2 message being played. PERV (« button . OGM button: Press to playback outgoing message. . SKIP {» » bunion .
INITIAL SETUP Before you can use your cordless telephone, the handset must be charged for at least 14 hours. SETTING THE DAY AND TIME L 2 After 14 hours, remove the handset from the base unit. Press the REMOTE button on the handset. The 39606 will prompt, * YOU HAVE (XX) NEW MESSAGE, FOR HELP PRESS 9”. 3. 4. Press the 2 button on the handset. The unit will prompt, “T/3E IS OFF, ENTER NEW DAY.
MEMORY DIALING (10-Memory) A. STORING TELEPHONE NUMBERS INTO MEMORY You can store up to 10 telephone bummers (up to 24 digits each) into memory and you can then dial any of the stored phone numbers, Make sure the base unit is in the standby mode. Press the MEMO button on the handset, Enter the telephone number you want to store (maximum of 24 digits). Press the MEMO button once again. . Press a number (0 through 9) where you want io store the phone number.
When the handset ghost its system id, the handset LED will emit two flashes. ANSWERING MACHINE OPERATION The 39606 features a sophisticated DIGITAL ANSWERING SYSTEM. Incoming Messages (Micmac, Outgoing Message (OGM) and Monte message are stored electrically into digital memory. Messages are accessed instantly and arranged compactly in this. memory.
CHECKING THE OGM Press the PREVIOUS button on the base unit to hear your previously recorded OGM. H you have not recorded your OGM, the unit will state, “YOU HAVE NO ANNOUNCEMENT*. RECORDING MEMO You can record your MEMO remotely on the handset. 1. Press the REMOTE button on the handset. The 39606 will prompt, “YOU HAVE (NO) NEW MESSAGE, FOR HELP PRESS 9”, 2. Press 4. The unit will prompt, “PLEASE RECORD YOUR MESSAGE AFTER THE BEEP, TO STOP PRESS STAR. 3. After hearing a long beep, begin your recording, 4.
2. The 35606 will announce “MESSAGE (NUMBER) ERASE” And then start the next message, 8B. ERASING ALL MESSAGE Press and hold ERASE button about 2 seconds. Then the unit will announce, “ MESSAGE ERASE, YOU HAVE NO MESSAGE". C. ERASING ALL MEMO MESSAGE Press ERASE button briefly, and press and hold MEMO button about 2 seconds within 8 seconds. Then the unit will announce “ MESSAGE ERASE. YOU HAVE NO MEMO MESSAGE”. D. ERASING OGM During OGM playing, press the ERASE button.
Calling the 39606 from a tone dialing phone USING THE HANDSET Press the REMOTE button to activate the remote fiction. The handset and base INFUSE indicator will blink. CALLING THE 39606 FROM A TONE PHONE Call the 39606 from a tone-dialing phone. While the OGM is playing or during ICM recording, enter # plus 2 digit password. After a successful password entry, the Remote function is activated.
REMOTE COMMANDS 4. MENU KEY FUNCTION CHANGE PASSWORD CHANGE TIME AND DAY PLAYBACK MEMO MESSAGE RECORD MEMO MESSAGE RECORD OGM MESSAGE SET THE ANSWER MODE ON PLAYBACK MESSAGE PLAYBACK OGM HELP STOP FUNCTION SET THE ANSWER MODE OFF ING PLAYBACK, YOU CAN PRESS FOLLOWING KEYS: PLAYBACK PREVIOUS MESSAGE REPEAT A MESSAGE SKIP FORWARD TO THE NEXT MESSAGE ERASE'A MESSAGE STOP FUNCTION NOTE: You maybe hear continuous beeps (beep-beep-beep) several seconds after erasing operation.
NO ANNOUNCEMENT". 4 RECORDING 4 MEMO 1. Press the 4 button and the unit will prompt, “PLEASE RECORD YOUR MESSAGE AFTER THE BEEP, TO STOP PRESS STAR.” After hearing a long beep, begin your recording, Press star to stop recording, The maximum recording time is 2 minutes. PLAYBACK MESSAGE/MEMOS Press the 7 button for message playback or Press the 3 button for memo message playback. The 39606 will prompt, “ YOU HAVE (¥ UMBER} (NEW) (MEMO) MESSAGE.” XK.