IMPORTANT SERVICE INFORMATION Read this manual before attempting to setup or use this instrument. It contains important information regarding safe installation and use. Keep this manual for future reference. Also save the carton, packaging and proof of purchase to simplify and accelerate any needed action. WARNING To prevent fire or shock hazard, do not expose this product to rain or any type of excess moisture.
The contents of this package, and the functions of your particular unit, may vary slightly from the features explained in this manual. SAVE THESE INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3.
10. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. 11. To reduce the risk of electric shock, do not disassemble this product, but take it to a qualified service contractor when some service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks.
MAINTENANCE 1. 2. Use a damp cloth to clean the plastic cabinet. A mild soap will help to remove grease or oil. Never use polish, solvents, abrasives or strong detergents since these can damage the finish. Your phone should be situated away from heat sources such as radiators, heaters, stoves or any other appliance that produces heat. CAUTION There is the risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instruction.
9. Disconnect telephone lines before installing batteries SAVE THESE INSTRUCTIONS FCC NOTICE The FCC requires that you be advised of certain requirements involving the use of this telephone. 1. This telephone is hearing aid compatible. 2. This equipment complies with 47 CFR Part 68 requirements. On the bottom of this equipment is a label that contains, among other information, the ACTA registration number and Ringer Equivalence Number (REN) for this equipment.
7. USOC jack type is RJ11C and the compatible jack is part 68 compliance. NOTICE: If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this [equipment ID] does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer. This device complies with Part 15 of the FCC Rules.
A. For a handset that has the potential to be used in a body worn configuration and has been tested and certified with a specific accessory device(s): For body worn operation, this handset has been tested and meets the FCC RF exposure guidelines when used with the (manufacturer name) accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. B.
UA23324H CONTROLS DIAGRAM Intercom Button LCD Display Option/Mute/ CID/ Button (Phonebook) Button Redial/Pause Button / Menu/OK/ Button Speakerphone/ Answer Call CID OPT MUTE INT RE/PA Button 1 S D IA L ED CALL OK MENU EXIT 3 2 DEF 5 MNO ABC 4 / GHI Dialed Calls 7 PQRS JKL 8 TUV 6 9 WXYZ Button CONF LDS */ (Move (Power) FLASH DELETE Exit/ (End Call) Button # / CONF/ (Move Right)/ (Lock Keypad) Button Left )/ (Deactivate Ringer) Button Flash/Delete / Button LDS Bu
UA23324H CONTROLS DIAGRAM LINE Jack DC 6V Jack DC 6V Jack 6 VDC 2 50 mA CHARGE LED Indicator CH ARGE PAGE Button IN USE/CHARGE LED Indicator 080306A-1 PAGE IN US E CHA RGE 9
DESCRIPTIONS Handset Controls: LCD Display - Shows call information, phone status, prompts and Phonebook items. MENU/OK/ (Power) Button - Press to access the program menu. Press to confirm a selection during menu operation. Press and hold to switch power off. OPT/MUTE/ Button - Allows you to change the format of displayed number. In talk mode, this button allows you to temporarily disable the handset microphone. The LCD Display will show “MUTE”. This button is used to access the phonebook.
* / / Button - Used to temporarily change the dialing mode from Pulse to Tone when dialing in the Pulse mode. Press to move left on the large Button to LCD Display. When the phone rings, you can press the deactivate the coming ringer. In this situation, press any keypad to activate the ringer. # / /CONF (CONFERENCE)/ Button - Press to lock and unlock the keypad at standby mode. Press to activate 3-way conference. Press to move right on the large LCD Display.
TEL LINE jack – Accepts the line cord for connection to the telephone outlet. INSTALLATION CAUTION: USE ONLY THE Ni-Mh BATTERY TYPE INCLUDED WITH THIS UNIT. USE OF OTHER BATTERY TYPES MAY CAUSE INJURIES OR DAMAGE. 1. Remove the battery compartment cover of the handset by pressing the top of the cover and sliding it down. 2. Connect the Ni-Mh battery pack plug along the slot into the handset’s battery connector as shown below.
Belt clip hook (Figure 2) WALL USE: Wall Mounting (Standard Wall Jack) 1. Install the wall mount bracket at the position as shown in Figure 3. 2. Connect the short telephone line cord to the TEL LINE jack. 3. Connect the opposite end of the telephone line cord to the modular wall jack. 4. Align the wall mounting slots with studs located on the modular wall plate and slide base down to lock in place.
2. 3. (Figure 4) Drive a screw into each of the holes. Tighten them to the end of the screw lines, only leaving the smooth part of the screw head outside the wall. Place the unit onto the screws, then slide it down firmly to fasten the base securely. Uninstalling the Wall Mount Bracket To remove the wall mount bracket from the base unit, pull it forward as shown in Figure 5.
Charger Base Unit DC6V Jack AC Outlet AC Outlet DC 6V Jack AC Adaptor Plug 6 VDC 2 50 mA AC Adaptor Plug AC Adaptor (Figure 6) 6VDC Adaptor INITIAL SETUP Please follow these steps before using the cordless telephone for the first time. 1. Ensure that the handset battery pack is installed and charged fully (for at least 14 hours initially) 2. Ensure that all connections (line cord and adapter cord) are properly inserted into the rear of the base unit.
REGISTERING THE HANDSET (NOTE: Maximum of 5 handsets can be linked to the same base unit; Maximum of 4 bases per handset) You can purchase additional handsets (5 handsets can be registered) for use with many of this telephone’s features. Make sure the battery is connected and the base is powered on before starting the operation. 1. Press and hold the PAGE button on the base unit until the base IN USE LED Indicator flash. 2. Press the MENU/OK button. 3. Press the or button to select “ REGISTER”. 4.
2. 3. The external call is put on hold and the internal called handset rings. After the internal called handset has answered, press the button to hang up your handset to complete the call transfer. Note: If the internal called handset does not answer the internal call with 30 sec, the handset will return to the external call again. CONFERENCE CALL When you are on an external call, you can invite another internal handset to join your conversation.
A. 1. 2. 3. 4. B. 1. 2. 3. 4. C. 1. 2. 3. D. 1. 2. 3. PLACE A CALL Pick up the handset and press the / button. The LCD Display will ”. show “ Listen for a dial tone. Dial the telephone number. The phone numbers appear on the LCD Display as you enter the number. When finished with your call, press the button. The base IN USE LED indicator will light up steadily. PLACE A CALL WITH SPEAKERPHONE Press the / Button twice for speaker mode. The base unit IN USE LED indicator will flash. Listen for a dial tone.
2. 3. / button on the handset. The base unit IN USE LED Indicator will flash. Start your conversation. To end your conversation, press the button, the base IN USE LED Indicator will light up steadily. DIAL ONE OF 10 REDIAL NUMBERS 1. Press the DIALED CALLS button. 2. Press the or button to scroll through to the previously called numbers. 3. Press the / button. The selected number will be dialed automatically. LAST NUMBER REDIAL A. AFTER HEARING A BUSY TONE WHEN PLACING A CALL 1.
FLASH FUNCTION • Used to access custom calling features such as Call Waiting or Three-Way Calling provided by your local phone company. Flash can also be used to restore a dial tone to make a new call. LOW BATTERY WARNING • When the handset battery voltage level is low, the “BATTERY LOW” icon will flash. When the battery is full, all cells will be shaded on the icon. • Return the handset on the base cradle to charge.
MENU Structure CALL LOG RECEIVED CID BOOK DIALED LIST ADD TO PB DELETE DELETE ALL LIST NAME? NUMBER? DEL ITEM SELECT ENTRY CONFIRM? DELETE ALL CONFIRM? ADD ITEM PHONE BOOK MELODY MELODY1-12 CHANGE ITEM PB STATUS BS SETTING TERMINATE HS PIN? DIAL MODE TONE PULSE FLASH TIME 100 ms 300 ms 600 ms 1000 ms MODIFY PIN PIN? BS DEFAULT PIN? ALARM ALARM ON HS1 HS2 HS3 HS4 HS5 NEW COF PIN HH:MM ALARM OFF INT RING RING SET EXT RING TONE SET LANGUAGE HS SETTING MELODY1-12 VOLUME OF
CALLER ID OPERATION GETTING TO KNOW YOUR NEW PHONE IMPORTANT: Subscription to Caller ID (CID)/Call Waiting ID services from your local phone company is required for using the Caller ID/Call Waiting ID features of the UA23324H. Your new UA23324H telephone gives you the ultimate in cordless telephone sound quality with the luxury of Caller ID and Call Waiting ID. If this is your first cordless telephone, you will soon discover that your cordless is similar to regular telephones, except without the cord.
work? name (if available), and the telephone number (if available) of the person calling before you answer your telephone. Who provides Caller Your local telephone company. However, not all ID service? local telephone companies provide Caller ID service. Please call you local phone company to confirm that the service is available before you install the device.
555-555-1212 JOHN SMITH Month/Date 12/15 10:00 AM 555-555-1212 JOHN SMITH 20 12/15 Time 10:00 AM 20 Number of calls recorded 2. Press the or button to scroll to the next call. The button will go through the calls from the last call received to the first. The button will allow you to view the calls from the first call received to the last. 3. Press the button to finish. NOTE: If no active buttons are pressed for 20 seconds, the LCD Display will automatically return to idle mode.
2. show “DEL MESSAGE?”. Press the MENU/OK Button to delete message icon. PLACING A CALL FROM THE CALLER LIST 1. Press the CID button. or button to select the call record you wish to call 2. Press the back. Each press of OPTION button will change the format of display as follow. 7 – digit: 7digit phone number 10 – digit: 3 digit area code + 7 digit phone number 11 – digit: long distance code “1” + 3 digit area code + 7 digit phone number. 3. Press the / button to dial out. 4.
5. 6. 7. 8. 9. Press the MENU/OK button twice. Press the or button to scroll the call record you wish to delete. Press the MENU/OK button. Press the or button to select “DELETE”. Press the MENU/OK button to confirm. The LCD will show “CONFIRM?”. 10. Press the MENU/OK button to confirm. 11. Press the button to return to Idle Mode. DELETING ALL RECORDS IN THE CALLER LIST 1. Press the MENU/OK button 2. Press the or button to select “CALL LOG”. 3. Press the MENU/OK button 4.
(0-9). You can store up to 20 digits. Press the MENU/OK button. The melody name is displayed, the ringer tone will also be sounded. The default name to be displayed is “Melody 1”. The user can move through the melody options using the or button. 10. Press the MENU/OK button to confirm. NOTE: If there are no memory locations left in the phonebook, the unit will display “PB FULL”. To continue with memory programming, you must delete or edit existing speed dial numbers.
one touch dialing. You can store up to 50 names and telephone numbers in the Memory. button. 1. Press the 2. Press the or button to find the one you need. 6045551212 ALEX BROWIN 6045551212 ALEX BROWIN NOTE: To exit the Phonebook at anytime, Press the button. EDITING NAME AND NUMBER IN THE PHONEBOOK 1. Press the MENU/OK button. 2. Press the or button to select “ PHONE BOOK” 3. Press the MENU/OK button. 4. Press the or button to select “ CHANGE ITEM” 5. Press the MENU/OK button. 6.
To erase, press the DELETE button to remove previous number. To add, use the TELEPHONE KEYPAD buttons (0-9). 11. Press the MENU/OK button. The melody name is displayed, the ringer tone will also be sounded. The default name to be displayed is the “Melody 1”. The user can move through the melody options using the or button. 12. Press the MENU/OK button to confirm. NOTE: When no active buttons are pressed for 20 seconds, the LCD Display will automatically return to idle mode.
5. 6. 7. Press the MENU/OK button The LCD will show “CONFIRM?” Press the MENU/OK button to confirm. button to return to Idle Mode. Press the PB STATUS This function allows the user to see how many entries in the phone book are occupied. On entering the function, the user will see the number of entries. 1. Press the MENU/OK button. 2. Press the or button to select “ PHONE BOOK” 3. Press the MENU/OK button. 4. Press the or button to select “ PB STATUS” 5. Press the MENU/OK button to see how many entries. 6.
6. 7. 8. Press the or button to select TONE or PULSE. Press the MENU/OK button to confirm. button to return to idle mode. Press the FLASH TIME SETTING The user can select to change the Flash Time. 1. Press the MENU/OK button. 2. Press the or button to select “ BS SETTING” 3. Press the MENU/OK button. 4. Press the or button to select “ FLASH TIME” 5. Press the MENU/OK button. 6. Press the or button to select 100MS, 300MS, 600MS or 1000MS. 7. Press the MENU/OK button to confirm. 8.
BS DEFAULT SETTING This function allows the user to restore the Base setting to the factory default. 1. Press the MENU/OK button. 2. Press the or button to select “ BS SETTING” 3. Press the MENU/OK button. or button to select “ BS DEFAULT” 4. Press the 5. Press the MENU/OK button. 6. Enter the modified PIN NUMBER. 7. Press the MENU/OK button to confirm. HS SETTING ALARM SETTING The alarm feature can alert you at a set time. When the alarm is alerting, your handset ring for 30 seconds.
8. Press the button to return to idle mode. RING SET The user is able to change the settings for the Handset ringing on Internal Calls. The user is able to adjust the internal ring volume from the range of volume levels available. The user is able to change the settings for the Handset ringing on External Calls. The user is able to adjust the external ring volume from the range of volume levels available. 1. Press the MENU/OK button. 2. Press the or button to select “HS SETTING” 3.
8. Press the or button to select ON or OFF. 9. Press the MENU/OK button. button to return to idle mode. 10. Press the LANGUAGE SETTING This telephone offers ENGLISH, FRENCH, SPANISH languages for your convenience. 1. Press the MENU/OK button. 2. Press the or button to select “HS SETTING” 3. Press the MENU/OK button. 4. Press the or button to select “LANGUAGE”. 5. Press the MENU/OK button. 6. Press the or button to select desired language. 7. Press the MENU/OK button to confirm. 8.
7. Press the MENU/OK button to confirm. 8. Press the button to return to idle mode. BARRING SETTING The Handset can be set to disable external outgoing calls. The user is able to select enable/disable for this feature. Note that internal calls to intercom or conference will still be available. 1. Press the MENU/OK button. 2. Press the or button to select “HS SETTING” 3. Press the MENU/OK button. 4. Press the or button to select “BARRING”. 5. Press the MENU/OK button. 6. Enter the PIN NUMBER. 7.
CONTRAST SETTING 1. Press the MENU/OK button. or button to select “HS SETTING” 2. Press the 3. Press the MENU/OK button. 4. Press the or button to select “CONTRAST”. 5. Press the MENU/OK button. 6. Press the or button to select level 1, 2, 3, 4, 5. 7. Press the MENU/OK button to confirm. 8. Press the button to return to idle mode. SELECT BASE SETTING This function allows the user to select a base from those already registered to the handset. 1. Press the MENU/OK button. 2.
HS DEFAULT SETTING This function allows the user to restore the Handset settings to the factory default. 1. Press the MENU/OK button. 2. Press the or button to select “HS SETTING” 3. Press the MENU/OK button. 4. Press the or button to select “HS DEFAULT”. 5. Press the MENU/OK button. The LCD will show “ PIN?”. 6. Use the telephone keypad button to enter PIN NUMBER. 7. Press the MENU/OK button to confirm. SECURITY CODING 1. 2. 3. 4. 5. The length of the handset security code is 16 bytes, i.e. 128 bits.
Each combination of the code is randomly generated by factory equipment. IMPROVING CORDLESS RECEPTION Follow these guidelines to improve cordless sound quality: • Select an area to install the unit where it is closest to the center of your home or office. This will improve the operating range of the unit. • Keep the base unit away from electrical equipment. Radio Frequency Interference (RFI) is sometimes generated by these appliances, which can cause degradation in cordless reception.
MAINTENANCE 1. 2. Your phone should be situated away from heat sources such as radiators, heaters, stoves or any other appliance that produces heat. Use a slightly damp cloth to clean the plastic cabinet. A mild soap will help to remove grease or oil. Never use polish, solvents, abrasives or strong detergents since these can damage the finish. TECHNICAL INFORMATION This cordless phone uses radio frequencies to allow mobility.
TROUBLESHOOTING A. TELEPHONE UNIT TROUBLESHOOTING TABLE SYMPTOM No dial tone SOLUTION • • Does not ring • • 40 Check the telephone line cord connectors at both ends to see that they are pushed in firmly until they click. If you had a power failure or unplugged the base unit, replace the handset on the base unit for two to five seconds to reset the system. Check the RINGER mode on the handset. For normal use, set to RING 1,2,3,4. The handset will not ring in OFF mode.
• No power on the handset unit • • Does not charge • • • Range is limited • • • Calls received flutters or fades Interference on reception Excessive static 080306A-1 • • • click. You may have exceeded the Ringer Equivalence Number (REN) limit of how many phones can be connected to the same line. The REN total of all devices (printed on the bottom label of each unit) should not exceed five (5). Disconnect the appropriate units to lower the REN total.
B. CALLER ID SYSTEM TROUBLESHOOTING TABLE SYMPTOM The Caller ID display is blank The Caller ID does not show the caller’s name and/or phone number SOLUTION • • • • • 42 Check the power connection. Check the telephone line cord connections. Check the batteries for proper installation. The Caller ID unit will not function until you have Caller ID service provided by your local phone company.
• • Random characters and/or “NO DATA” appear on the LCD display Cannot get Call Waiting identification on the LCD panel • • to answer after two rings or more. If it is a blocked call or an out-of-area call, the caller’s name and/or phone number will not appear on the display. If only the caller’s phone number appears on the display, it may be a Single Data Message Format (SDMF) call, as opposed to a Multiple Data Message Format (MDMF) call.
IDT Customer Services can be contacted by calling 1-888-757-6545, 7 days a week, 24 hours a day. If you believe your phone is defective or missing components, please contact ATS Customer Service at 1-888-928-7746, Monday – Friday, 9 am to 5 pm PT. LIMITED WARRANTY This limited warranty only applies to the use of this device with a communications service for which it is designed.
communications service provider; or (2) interference from other radio frequencies or transmissions, static electricity, and other electronic devices. What Does Our Warranty Cover? Our warranty covers any defect in material and workmanship. How Long Does the Warranty Coverage Last? The warranty lasts for one year following the date of purchase and is available to the original purchaser only.
the defect. American Telecom Services, Inc. shall not be liable to you or any other party for any direct, indirect, general, special, incidental, consequential, exemplary or other damages arising out of the use or inability to use the product (including, without limitation, damages for loss of business profits, business interruption, loss of information or any other pecuniary loss), or from any breach of warranty. American Telecom Services, Inc.
Include payment for any service or repair not covered by the warranty, as determined by American Telecom Services, Inc. How Does State Law Apply? This warranty gives you specific legal rights, and you may also have other rights which vary from state to state, or province to province. More Service Information For service information, in and out of warranty, call American Telecom Services, Inc. Customer Support at: 1-888-928-7746 Returned Devices should be sent to: American Telecom Services, Inc.
UA23324H/080306A-1 48 080306A-1
