User's Manual

ManualsBrandsUni-Art Precise Products ManualsElectronicsRadio scanning receiver

Table Of Contents

Battery care

Warranty and Returns

1. Warranty Statement - This express warranty is extended by Upsales Inc. a Georgia company having it offices at 4080 McGinnis

Ferry Road, Suite 1204 Alpharetta, GA 30005 to the original end user purchaser. Upsales Inc. warrants the ProScan 100 to be free of

defects in material and workmanship for a limited period of ninety (90) days from the date of sale to the original end user purchaser,

subject to the following conditions herein.

2. General Provisions - This warranty sets forth the full extent of Upsales Inc. responsibilities and consumer's exclusive

remedy regarding the Product. Upsales Inc. will, as its sole obligation under warranty, replace any Product that does not conform to

this warranty.

3. Ninety (90) Day Standard Limited Warranty - Upsales Inc. products are shipped from the factory with a standard limited warranty of

ninety (90) days on parts and labor from the date of purchase by the original end user purchaser based on proof of purchase receipt.

In the event of a defect, malfunction, or failure to conform to specifications during the warranty period, Upsales Inc. will replace the

Product (replacements are available through the retailer where the Product was purchased, only if all the components parts and original

packaging and manual are returned). This Warranty does not cover wear and tear on the covers or housing.

3. Voiding of Warranty - The warranty will be VOID if a Product is received for return or refund by your retailer and: (a) is incomplete

(i.e., boards or components are missing), or it does not include all original packaging and user manual; (b)has been opened by, or

has had work performed by, anyone other than an Upsales Inc. authorized service provider; (c) has non-conforming or non-Upsales

inc. approved housing or parts.

4. How to Receive Warranty Service - To obtain warranty service you must return the defective Product with a copy of the original

dated sales receipt to the retailer where the product was purchased, along with all the component parts and original packaging,

and user manual.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference

that may cause undesired operation.

1. Keep your battery contact surfaces and battery compartment contacts clean

- Rub surfaces with a clean pencil eraser or rough cloth

2. Follow Instructions that came with your equipment

- Ensure proper insertion of batteries, (+) and (-) terminals are aligned correctly

3. Store batteries in a dry place at normal room temperature

- When stored at room temperature Duracell batteries are guaranteed to provide dependable life

- Refrigeration or freezing is not recommended

4. Remove batteries from a device when not expected to be in use for several months

5. Always replace batteries with the size and type specified by the manufacturer of the device

- Alkaline batteries are most often recommended

- Zinc Carbon batteries have inferior life-span and may cause inferior operation

6. Extreme heat or cold reduces battery performance

- Avoid putting battery operated devices in very warm places

- If device must be used in extreme temperatures always use alkaline

- Alkaline batteries perform better than regular carbon batteries in temperature extremes

7. Don’t mix old and new batteries or types within a device

- Mixing will reduce device performance and could cause leakage or rupture

8. Remove worn-out batteries immediately to prevent possible damage from battery leakage

9. Don’t store batteries loosely or carry them in your pocket

- Batteries can be shorted by contact with metal objects such as coins and cause leakage or rupture

10. Never dispose batteries in fire

11. Do not attempt to recharge a battery unless specifically marked “rechargeable”

and thank you for purchasing the ProScan 100. The ProScan 100 is the

best way to get into the race and stay connected while supporting your favorite

driver or team. This guide will walk you through the functions and operation of

the ProScan 100. Please read the following instructions provided.

Welcome

Inserting the batteries

To insert the batteries:

1. Slide the Top switch to the Off position

2. Slide open the battery door on the back of the ProScan 100

3. Insert the batteries making sure to

orient the batteries according to the diagram

inside the battery compartment

NOTE: Duracell batteries are recommended.

Attaching the Lanyard / Belt clip

The lanyard and belt clip are both great ways

to carry your ProScan 100.

Attaching the Belt clip:

1. Aligning the arms of the belt clip with the

divots on the edges of the ProScan 100

2. Press the clip firmly against the back of the

ProScan 100 until your hear a snap

Attaching the Lanyard:

1. Insert the tabs on the belt clip into the

oval holes on the ends of the lanyard

and pull up on the lanyard to snap the

clips into place

Batteries are required to power

the ProScan 100.

Connecting Headphones

Adjusting the volume

Adjust the volume using the arrow keys on the left side of the ProScan 100.

The current volume will be indicated in the display.

To adjust the Volume:

1. Repeatedly press either the Up or Down arrow on the left side of the radio

labeled volume

NOTE: Pressing and Holding the Volume will continually raise or lower the

volume until released.

The ProScan 100 includes an FM radio for use at or away from the track.

To play FM radio:

1. Slide the Top switch to FM

2. Use the Tune Up and Down arrow keys to tune/scan to different frequencies

- In Preset mode, the Tune Up/Down keys will tune to stored presets

- In Direct mode, the Tune Up/Down keys will scan to the next active frequency

NOTE: To change the mode between Preset and Direct, press the mode key.

The ProScan 100 can tune FM radio stations by keying in the radio station frequency

To direct dial FM radio stations:

1. Slide the Top switch to FM

2. Slide open the front cover

3. Press Mode until "Direct" appears on the display

4. Enter the radio station frequency (ex. 9-5-5 for 95.5 FM) (cont. inside)

1. Insert the headphone plug into the headphone jack on the top right

IDEA: You can use any headphones with the ProScan 100.

NOTE: Do NOT use for extended periods at high volume. Loud noise both from

the Radio and the Track can cause hearing damage or hearing loss

Playing the FM Radio

Upsales, Inc.

4080 McGinnis Ferry Road, Suite 1204

Alpharetta, GA 30005

For Customer service

1-866-426-6568

www.proscanracing.com

Summary of content (2 pages)

PAGE 1
Battery care 1. Keep your battery contact surfaces and battery compartment contacts clean - Rub surfaces with a clean pencil eraser or rough cloth 2. Follow Instructions that came with your equipment - Ensure proper insertion of batteries, (+) and (-) terminals are aligned correctly 3. Store batteries in a dry place at normal room temperature - When stored at room temperature Duracell batteries are guaranteed to provide dependable life - Refrigeration or freezing is not recommended 4.
PAGE 2
Storing and Selecting FM presets Deleting ALL presets To store FM presets: 1. In Direct mode, tune to the station you want to store. 2. Slide open the front cover 3. Press Save, then press the number key under which you want to store the current radio frequency 4. To Add / Change a preset simply repeat steps 1 - 3 To delete all Race presets: 1. Press and hold Mode for 2 seconds. "DELETE?" will appear in the display 2. Press the Tune Down arrow key, "DEL ALL" will appear in the display 3.