Contents 900MHz Wireless Headphone HP5990A, HP5990, HP5990J, HP5990AJ English !!!Please ensure you read the user manual thoroughly before use!!!
!!!Please refer to our website: www.geemarc.com for an up to date user guide, as there may be important updates and changes you need to be aware of!!! INTRODUCTION ......................................................... 3 SAFETY & CARE ADVICE ............................... 4 PACK COMPONENTS ................................................ 5 FUNCTION IDENTIFICATION ..................................... 6 ● Function Identification: Headset Receiver ...............
Contents INTRODUCTION TROUBLESHOOTING ....................................... 18 ● No Sound ................................................................ 18 ● Distortion ................................................................. 18 Cleaning & Maintenance ........................................... 19 Spare/replacement parts ........................................... 19 Customer support ...................................................... 19 GUARANTEE ..........................................
The Geemarc Wireless Audio Listener is an audio amplification system specifically designed for people with hearing difficulties. The Geemarc Audio Listener can be used with all kinds of audio systems for interference-free listening enjoyment – TV set, Smartphone, DVD player, CD player, Hi-Fi system, iPod or other. Audio output from a TV or audio device is transmitted by the Charging Cradle, the wireless Headset receives the signal and amplifies the audio sound for the listener.
SAFETY & CARE ADVICE SAFETY & CARE ADVICE To make the best use of this product and to use it safely, please read these instructions thoroughly before use and keep safe for future reference. Warning: This product can be very loud. Take care to prevent others from using this product, if they do not have the same level of hearing loss. Excessive sound pressure from earphones and headphones can cause hearing loss. Caution: Electric shock. DO NOT insert unattached plug heads in to mains power sockets.
PACK COMPONENTS PACK COMPONENTS (1) Headset Receiver/TV Receiver(with Belt Clip) (2) Charging Cradle and Transmitter (3) Power Supply (4) Optical Cable (5) Ear Phone 5
FUNCTION IDENTIFICATION FUNCTION IDENTIFICATION Function Identification: Headset Receiver REAR FRONT (1) Earbuds (2) Volume Control (3) Power/Signal LED Indicator 6
FUNCTION IDENTIFICATION (4) Mute Button for Verbal Communications (5) Microphone (6) Auto Tune Button for Frequency Channel (7) Sound Balance Control (8) Power On/Off Switch (9) Battery Contact Function Identification: Charging Cradle 7
FRONT REAR (1) Charging Pins (2) Tone Adjustment (3) LED Indicator: Battery Charge (Red = charging, Green = fully charged) (4) LED Indicator (Green): Audio Signal (5) LED Indicator (Green): Power (6) LED Indicator (Yellow): Treble enhanced (7) LED Indicator (Blue): Bass enhanced (8) Audio In (9) Frequency Channel Selector (CH1 or CH2) (10) Optical In Socket (11) Power ON/OFF (12) DC In Socket INSTALLATION 8
INSTALLATION INSTALLATION Transmitter (1) Connect the Power Supply to the DC IN Socket located on the Charge Cradle rear panel. (2) Connect the Power Supply to an electricity socket (100240V ~ 50/60Hz). The green Power Indicator LED will glow immediately. (3) Connect one end of the Optical Cable to the rear panel of the Charge Cradle. (4) Connect the other end of the Optical Cable to your Audio Source (e.g. TV set, Hi-Fi system) with Optical Ouput.
OPERATION components) that connects to the Audio In of the Transmitter. • 3.5mm to 3.5mm Audio Cable • 3.5mm to 6.3mm Adapter Plug • RCA Adapter Cable • SCART Adapter (7) On the rear panel of the Charging Cradle, switch the Power ON/OFF Switch to ON. When the audio signal is detected from the Audio Source, the Green LED Signal Indicator will glow constantly. Headset Make sure the built-in Battery inside the Headset is fully charged for the first use – see Initial Operation below.
Initial Operation 1. Make sure the CL7350 is plugged into the electricity. 2. Switch ON the CL7350 – on the rear of the Charging Cradle (see figure (1) at right). 3. Place the Headset in the Charging Cradle for at least three hours to allow it to fully charge. • Make sure the Headset is switched OFF (see figure (2) at right). • The LED Indicator glows red during charging. • It will glow in green after the battery is fully charged (see figure (3) at right). 4.
OPERATION OPERATION 1. Switch on the Audio Source (TV set or audio device) that the Transmitter is connected to. The Signal LED Indicator will glow continuously (see figure (4) at right). 2. On the Headset Receiver, switch the ON the On/Off Switch (see figure (5) at right). The green signal LED Indicator will glow continuously. 3. Adjust the Volume to the desired sound level (see figure (6) at right), then fit the Earbuds in your ears.
OPERATION The CL7350 can transmit on either of two built-in frequency channels. You can select the channel that will produce better audio quality. 1. If the audio sound is distorted or unclear, press the Auto Tune Button on the Headset Receiver (see figure (7) at right), to match the frequency of Channel 1 or Channel 2 set at the back of Transmitter. Allow a few seconds for the audio to resume. 2.
OPERATION You can adjust the tone of the audio you are listening to and enhance your listening pleasure by amplifying either the Treble or the Bass in the Headset Receiver. to switch cyclically Press the Tone Clarity Button between : 1. Enhanced treble (yellow LED glows 2. Enhanced bass (blue LED glows ), ), or 3. Flat tone (bass and treble equally enhanced, no LEDs glowing ).
OPERATION You can adjust the sound to suit your hearing in each ear. With the Headset on, rotate the Sound Balance button (see figure (10) at right) to adjust the sound – you will notice that the sound seems to “drift” from one side to the other. Play with this button until you find your most pleasant sound balance. Using the Mute Button and Microphone for Conversation You can switch from Listening mode to Conversation mode without having to take off the Headset. To talk or listen to someone : 1.
OPERATION 1. The signal LED Indicator on the Headset Receiver will blink slowly when the battery level is low. At this stage there are about 20 minutes of operating time before the Headset will switch off. Recharge the battery. 2. Switch OFF the On/Off Switch on the Headset (see figure (12) at right). The green LED on the Headset should turn off. 3. Place the Headphone on the Charging Cradle (see figure (13) at right), make sure the charge contact touches the charge pins on the Charging Cradle. 4.
TECHNICAL SPECIFICATIONS acceptable service life for the rechargeable battery. Always ensure that the Headphone Receiver is switched to OFF position while the battery are charging. Excessive sound pressure from earphones and headphones can cause hearing loss. IMPORTANT: This unit should be operated with built-in rechargeable battery only. When replacing the battery or when disposing of the unit, always comply with applicable laws relating to the disposal of battery.
TROUBLESHOOTING Battery operating Time : Up to 6 Hours Range : Up to 60 meters (CL7350_VDE) : Up to 30 meters (CL7350_US) Frequency response : 30 Hz – 10K Hz Signal-to-noise ratio : >65 dB Distortion : <2% Headset weight : 58 grams Operating voltage : Charging Cradle: 8V, 400mA : Headset: 3.
Cleaning & Maintenance . Spare/replacement parts . Customer support No Sound ● Ensure the power supply is properly plugged into the electricity socket and that its cable is properly connected to the DC IN connector on the Charge Cradle. ● Ensure that the Headset Power ON/OFF switch is switched ON. ● Check the state of the Battery charging in the Headset – place it in the Charge Cradle and recharge the battery until the Battery Charge LED turns green.
GUARANTEE CE DECLARATION Note: DO NOT use alcohol, chemical or spirit based cleaning agents. Wipe Base and Headset clean with a damp cloth. Regularly remove (see figure (14) at right) and clean ‘Ear pads’ with warm soapy water. Two types of ear pad are supplied, select the most suited to yourself. Spare/replacement parts Spare parts are available from either the original place of purchase or by calling the Customer Helpline Telephone: 01707 387602 1. Additional Headsets 2.
BATTERY WARNINGS . DISPOSAL INFORMATION From the moment your Geemarc product is purchased, Geemarc guarantee it for the period of two years. During this time, all repairs or replacements (at our discretion) are free of charge. Should you experience a problem then contact our Helpline or visit our website at www.geemarc.com. The guarantee does not cover accidents, negligence or breakage to any parts.
x DO NOT attempt to dismantle. x DO NOT dispose of in fire. x DO NOT swallow. x Keep away from children. x DO NOT short-circuit the Battery Contact terminals. x Exhausted batteries are to be replaced only by a certified Geemarc service technician. x Caution: Risk of explosion if battery is replaced incorrectly or if the wrong type of battery is used. Dispose of used batteries according to the instructions.
IC This device complies with Industry Canada licenseϋexempt RSS standard(s). Operation is subject to the following two co nditions: (1) this device may not cause interference, and (2) t his device must accept any interference, including interferenc e that may cause undesired operation of the device. Le present appareil est conforme aux CNR d’Industrie Canad a applicables aux appareils radio exempts de licence.
For product support and help visit our website at www.geemarc.com telephone 01707 387602 or fax 01707 832529 UGCL7350_En_v1.