Safety Instructions IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electric shock and/or injury, always follow these basic safety precautions when using your cordless telephone equipment. | 1. Read and understand all instructions. 2. Follow ail warnings and deconstructionism on the product. 3. Unplug this product from the] wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners, Use a damp cloth for cleaning.
safety Instructions E If the product has been dropped or the case has been damaged. F. If the product exhibits a distinct change in performance. 13. Do not use the telephone to report a gas leak in the vicinity of the leak. 14. Never install telephone wiring during a lightning storm. | 15, Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. . 16.
Bathhouse Low LED Indicator: Lights up when the HEADSET is in TALK mods. Blinks when battery power is low. : TALK Button: Press to answer an incoming call or to place a call. Press to end a call. Memo Button: Press to stirs phone numbers in memory or to call a number you have previously stored. ; Flash Button: Press to answer an incoming call if behave Call Walling.
TEAL de vos pow @ Telephone Line Connection Jack | Tone/Pulse Select Switch Power-In Connection Jack } Antenna; Raise or reposition for best acceptation. In Use/Charge LED Indicator: Lights up to indicate the, unit is ON or when the HEADSET is placed on the BASE UNIT for charging. It flashes to indicate the page function is in use. | i PAGE Button: Press to page the HEADSET. | Charge Terminals: For charging the HEADSET battery pack. For best performance, clean periodically with & damp cloth only.
Je Io Connecting Your Phone This section is a reference guide to the basic functions and operations of your cordless telephone. For more detailed descriptions of the operations and features of this telephone, refer to the Contents on page 1. 1. Carefully remove your cordless telephone from its shipping cation. If there is any visible damage, do not attempt to operate this equipment. Return it to the place of purchase, Check to be sure you have: al items that cons with this cordless telephone system.
Basic Operation Preparing for Use Before you can use your cordless telephone, you must charge the HEADSET for 12 hours. Failure to do so will require recharging of the battery pack more often. 1. Place the HEADSET on the BASE UNIT for 12 hours. 2. After 12 hours, remove the HEADSET from the BASE UNIT, 3. False or reposition the BASE UNIT antenna for best reception. : I Before you can use your cordless telephone, you must charge the HEADSET for 12 hours.
receiving Calls Receiving Calls with the HEADS T on the BASE UNIT 1. When the phone rings, lift wile RESET. The IN USE LED indicator will light up| (NOTE: The HEADSET RINGER SWITCH must be in the “ON" position for ringer to operate.) 2. Start your conversation. | 3. To end your conversation, either press . the button or place the HEADSET on the BASE UNIT. If you place the HER SET on the BASE UNIT charge! cradle, you activate the automatic : STANDBY feature.
CE en Placing Calls . Press the (TALK) button. The IN USE LED indicator will light up. 2, Listen for a dial phone. 3, Dial the phone number. 4. When you have finished with your call, press the button again. } The IN USE LED indicator will turn } off. ; ’ ’ HEADSET Redial Feature 1. If you get a busy tone, press the button to hang up. 2. Later, press the (TALK) button again. ! 3. Listen for a dial tone. . 2 4, Press the (REDIAL) button. This ill automatically redial the fast telephone number you called.
Storing Numbers Storing Numbers 1. Be sure the BASE UNIT INFUSE LED indicator | is off and the HEADSET is in STANDBY mods. br Press the (MEMO) button. Dido the number you want to store. : press the (MEMO) button again, ; Dial the index number (0-9) where you want {0 store that number. You will hear one confirmation beep. 6. Write the name of the person you will be calling with that number next to the corresponding index number on the telephone number card. 7.
Recalling Stored Numbers Recalling Stored Numbers | from Memory 1. Press the (TALK button. 2. Press the(MEMO) button. Press the index number for the number you have stored. The stored | number will be dialed automatically. | EXAMPLE: To recall number 703-1968 stored under key 1 on the keypad: Press the (TALK Button. ~Press the (MEMO) button. Dial 1. REE 110237.
Lg [lag 78) Cai] WN 3 Security System Your cordless telephone uses a digital coding security system to prevent unauthorized use of your telephone line by another nearby cordless telephone. The system has its own identifying signal created by microcomputers in both the BASE UNIT and HEADSET. ; ! i Security Code This telephone has an internal security code with 65,536 possible combinations. Multi-Channel Access .
Recharging [0 FE la Recharging the Battery Pack The nickel metal hydroxide (Ni Mb} battery pack in the HE ASSET can be recharged many times using the built-in charger in the BASE UNIT. When the BATTERY LOW LED indicator starts to blink, a “beep” sound will be heard every 12 seconds, This indicates that the battery pack needs to be recharged. Charge the battery pack at least once every 80 days of nonuser to avid battery failure.
To Replace the Battery Pack: Pon 5. The battery pack provides power for the Headset of your cordless telephone. Remove the HEADSET battery compartment cover by sliding it down. Pull out the battery connector and remove the battery pack. Plug the new battery pack into the battery connector. Side the HEADSET battery compartment cover firmly into place in its closed position, Before uss, charge the new battery pack for 12 hours. ATTENTION: .
LE ET Problem Solving Section For your assistance, we have listed below a few common problems. Phone does not work, check the following: ‘ 1. BASE UNIT is plugged info power source. 2. HEADSET is charged. | 3. TONE/PULSE switch is in the right position. 4. TELEPHONE LINE CORD is plugged into the telephone ok. Range of phone limited, check he following: | 1. ANTENNA on BASE UNIT is raised. | t 2. BASE UNIT is centrally located in your residence. 3. BASE UNIT is not located near appliances.
Excess static, check the following: 1. Check to see that the ANTENNA is not touching another metal object. Raise the ANTENNA. If after pressing the TALK button, you receive three beeps and no dial tone, check the following: 1. BASE UNIT is plugged into power source. NOTE: If no telephones in the house are working, disconnect one set at a time to verify that none of the phones are causing the problem.
Technical Information Technical Information This cordless telephone uses radio frequencies to allow mobility. There are certain difficulties in using radio frequencies with a cordless telephone. While these are normal, the following could affect the operation of your system. Noise i Electrical pulse noise is present in most homes at one time or another. This noise is most intense during electrical storms.
ple real pr ] Federal Communications Commission Requirements This equipment complies with Part 88 of FCC Rules. A label on the BASE UNIT of this equipment contains, among other information, the FCC Registration Number and the Ringer Equivalence Barnum (REN) for this equipment. You must, upon request, provide this information to your telephone company.
Federal Communications Commission Requirements (continued) Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These milks are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with tha instructions, may cause harmful interference to radio communications.