BELL Equipment CORTISONE MODEL: BE-25FA HANDS FREE CORDLESS HEADSET TELEPHONE LTE LAD p= Installation and Operation Guide Please read this manual carefully prior to installing your telephone.
| TABLE OF CONTENTS Important Safely Instructions... Battery Cautionary Instructions. Control Diagrams... Features... Installation. Operation. Receiving calk Ending calls... Transferring call Care And Maintenance. Security System. Recharging the Battery Pac] Replacing the Battery Pack. Maintenance instructions. Problem Solving... Warnings... FCC Requirements...
When using your telephone squire 3 should airways be followed ta reduce the risk of fire, electrical shock, and injury to persons including the following: Read and understand ali instructions, Folio all wakings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners, or aerosol slanders. Use a damp cloth for cleaning, If necessary, use a mild soap. 4.
BATTERY CAUTIONARY INSTRUCTIONS CAUTION: To Reduce tha Fisk of Fire or Injury to Persons, Read and Follow these instructions. +. Tuscon followinglypsandsize of battery pack: 3.6¥. 600MAH, Nigh Battery Pack: GI GPE0AAAHIBML 2. Donor dispose of the battery in a fre, The call may explode. Chick with local Andes for possible special disposal instructions. 3. Don open or rusticate the battery. Released electrolyte Is corrosive and may cause damage (o the ayes or skin. 1 may be toxic If swallowed. 4.
CONTROL DIAGRAMS continued 186. Charge {CHARGE AN USE) LED Indicator : Lights up io indicate the HEADSET is being charged by the BASE UNIT. Indicator blinks when the HEADSET is in the IN USE mods. MEMO (MEMORY) Button : Used to store 10 phone nursers (up fo 18 digits each) or dial any of he stored phone numbers In the 10 memory locations. TONE Button : Used to temporarily change the dialing mode from Guise to Tone when dialing in the Guise mote.
CONTROL DIAGRAMS continued Talk Button : Press to answer an Incoming Cali or to place a cal ss to ond a cal RE/PA (EDITORIALIZE) Bunion ; Press fo redial the last number dialed (up to 64 digits) from the HEADSET, Also used 1o generate a “pause” in the dialing sequence whir storing numbers in memory {far Use in PA BX or long distance services). Channel Sean Bunion (SCAN); Press to change the operating channel when yau hear interference. Fish bunion : Press to answer an in corning call you have Call Waiting.
FEATURES The BE-25F A cordless headset telephones ts designed to provide you the convenience of high quality, portable telephone communication, The BE-257A telephone comes in two parts, a headset and a base. The headset allow you to make of receive calls away from its base. The headset keeps your sands fre, permitting you 10do other things while you talk. The bash's space saving, upright design males it ideal in areas where space is limited.
INSTALLATION Connecting our Phone 1. Carefully remove your cordless telephone from its shipping casino. 1 there are any visible damage, do not attempt fo operate this equipment. Return it to the place of purchase. 2. Hack 6 be sure you have a HEADSET, BASE UNIT, Antenna, AG Adapter, Telephone Line Cord, Battery Pack and Owner's Manual. Fhe JE 110v Lo AC ADAPTER 5 — | TELEPHONE Ni-MG BASE UMT LINE CORD BATTERY PACK 3.
INSTALLATION continued 12. 13. Plug the AC adapter lino a 120V AC wall outing. Insert one plug of the TELEPHONE LINE CORD into the house TELEPHONE JACK and ths other end into the telephone jock on ihe back of The BASE UNIT. [if you have an older 4-prong telephone jack, you will need an FJ-11C TELEPHONE JACK ADAPTER. This adapter is available at the same place you purchased your telephone.) Ras or reposition the antenna on the BASE UNIT for the best reception.
OPERATION Preparing for Use 1. Place tha HEADSET on the BASE UNIT for 12 hours. 2. After 12 hours, remove the HEADSET from the BASE UNIT. Placing a Call Using the HEADSET: 1. Press the TALK button on the HEADSET. Tho IN BATHHOUSE LOW LED indicator will fight up. The BASE UNIT CHG/IN USE LED blinks. 2. Listen for a dial tone. 3. Dial the phone number Using the BASE UNIT: 1. Press on the BASE UNIT. The INCOMPETENT LED indicator will Hht up. 2. Listen fora dial tons. 3.
OPERATION continued EE Ending a Call Using the & I ‘Binge the unit features *Auto-Standy®, velum the HEADSET fo the BASE UNIT or press the TAMEKA] bunion if you are away from the BASE UNIT. Using the BASE UNIT, Press the SEK] bunion to hang up. Last Number Redial you get a busy signal, use the Redial unction to automatically dial the fast phonon number dialed (up 10 64 digits). Bridal Using the HEADSET, oo 1. Lift the HEADSET and press thaffAiKouiton. 2. Listen fora dial tone.
Pe EAI A SAR WERE OPERATION continued Channel Selection Channel Scan {Auto scan) If your reeving a call or dialing out and TALKS pressed, the unit avocations for the best channel available. Chanson Scan (Marl) f the existing channel becomes noisy of starts having interference, press the STAR button on the HEADSET, The unit will autocratically scan for the best channel available. NOTE: it takes about 2 seconds for the unit to scan 10 the next channel.
OPERATION continued 3. if the BASE UNIT user does not want to access he telephone Cali white in the intercom mote, press he {Buttonhole on the BASE UNIT to return the phone call fo the HEADSET user or the HEAD SET user can press Helmholtz hist ton to return to the call. 1f the BASE UNIT user wants to access the telephone call while In intercommunicates, press Therese bitten. A three-way conversation is established.
OPERATION continued tiring Telephone Numbers into the HEADSET or BASE UNIT Memory 1. Press the bunion on either the HEADSET or BASE UNIT. 2. Dial ihe telephone number you want to store {maximum of 16 digits) on either the HEADSET or BASE UNIT keypad. Press the [Embrocation again. Press a memory location where you want to stir the phone number (1 to 8) for HEADSET and (010 9) for BASE UNIT. You will hear ane confirmation beep.
| | CARE AND MAINTENANCE Security System Your cordless telephone uses & digital security coding shyster to prevent unauthorized use of your telephone lining by another nearby cordless telephone. The stern has its own identifying signal created by microcomputers in both BASE UNIT and HEADSET. Security Coda “This telephone has an internal security code with 85,536 possible combinations.
CARE AND MAINTENANCE continued Recharging the Battery Pack Battery Type Use the following type and size battery pack: 5.6V, 600mAR Ni-MG Battery Pack: GP GPEOAAAHGBHI. Nigh Recharging the Battery Pack The nickel metal hydroxide (NI-MG) battery pack nth HEADSET can be recharged many times using the builtin charge in the SASE UNIT. When the battery pack is low, 2 "beep" sound will be hoard every 12 seconds and tha IN BATHHOUSE LOW LED indicator will blink rapidly.
CARE AND MAINTENANCE continued Replacing the Battery Pack Changing the Battery Pack The battery pack provides power for the HEADSET of your cordless telephone. To Replace the Battery Pack: . Remove the HEADSET battery compartment cover by siding it down. Phil out the battery connector and remove tha battery pack. Pius the new better pack ino the battery connector. Slide the HEADSET battery compartment cover firmly into place in ts closed position. Be fora uss, charge the new battery pack for 12 hours.
CARE AND MAINTENANCE continued Maintenance Instructions Your cordless headset xylophone has been designed to give years of trouble free mechanistically instrument, To assure if longevity, please read the following maintenance Instructions. 1. Keep your telephone away from heat as high temperatures can shorten the te of the electrical components and distort or melt ts plastic parts. Keep your telephone free of dust and moisture. If i gets wet, weeps it intermediately .
PROBLEM SOLVING Problem Solving Section For your assistance, we have listed below a fw common problems. Phone does not work, check the following: 1. BASE UNIT is plugged Into power source. 2. HEADSET is charged. 3. TONE/PULSE SWITCH is in tne right position. 4 LINE CORD is plugged In the jack. Range of phone limited, check ths following: 1. ANTENNA on BASE LIMIT is raised or refashioned 2. BASE UNIT Is centrally located in your residence. 3.
WARNINGS IMPORTANT In order to get maximum life from the HEADSET battery pack, be sure to charge the HEADSET for 12 hours before initial use. Placing your BASE UNIT near appliances LY microwave ovens may cause interference. When you hear interference, press the SCAN button to change ihe operating channel. The AG ADAPTER must always be plugged into an electrical outset.
EE FCC REQUIREMENTS EQUIPMENT NOTES This equipment is registered with the Federal Communications Commission end is in compliance with Part 68 of the FCC Rules and Regulations. On the bottom of this equipment is a label indicating among other information, the FCC Registration Number and Ringer Equivalence Number (REN) for this equipment. Upon request, you must provide this Information to your freephone company.
FCC REQUIREMENTS continued INTERFERENCE INFORMATION This equipment generates and uses and oan radiate low revel radio frequency energy.
Astray Telecommute Limited Warranty Astray wants that the BE-SOFA sold by Astray wink the continental mis of the United States, Hawaii and ‘Na ska, are fro from defects in materials and workmanship under normal use and servile for 1 year.