Caution: You must read this before you proceed Single Chair Label Description QTY A Side Panel 2 B Back Support Bar 1 C Seat (Labeled with face and bottom) 1 Description QTY Bolt:M6*20MM 10 Label D Picture Picture
E Allen Key 1 F Seat Cushion 1 G Back Cushion 1 Before Beginning Assembly: Step 1 Take out the silders in the four ends of the Seatboard(C ) using Allen Key(E ).
Step 2 Insert the Seat(C) onto the Side Panel(A), as shown in the picture. Step 3 Attach Seat(C) and Side Panel(A) using Bolt(D) with Allen Key(E) as shown in the picture. Loosely tighten the Bolts. Step 4 Attach Back Support Bar(B) to Side Panel(A) using Bolt(D ) with Allen Key(E). Loosely tighten the Bolts.
Step 5 Repeat Step1 to Step 3 to attach the second Side Panel(A). Place chair upright and test for stability. Then in a sequential manner, proceed to fully tighten all Bolts at all joints. Step 6 Stand the Chair up. Put Back Cushion(G) and Seat Cushion(F) on the Chair, and stick the vercro. Your Single Chair is ready for use.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.