Ultra Pro Hover HD 250 Amplified Antenna Bar User’s Manual
Introduction: The 37075 Ultra Pro Hover HD 250 Amplified Antenna Bar is specifically designed to receive digital TV reception. The sleek and stylish design will blend in with any décor and fit most HD televisions. Important safety instructions: • USE only indoors. • DO NOT install in wet locations or locations that can get wet.
Antenna Assembly & Installation: 1. After removing Antenna from package, select the mounting method you prefer and place the antenna in the desired location. a. Mount above TV or to wall. b. Lay the antenna flat. c. Use the TV mount (as shown below). Note: When mounting to your HD television, in order to get the antenna to fit properly, please adjust the television mounting bracket by opening it enough so that the antenna sits flush on the television.
. Connect the UL-listed power adapter and plug into an available wall outlet. Note: UL listed power adapter needs to be plugged in for the antenna to work properly. a. If desired use the supplied adhesive strips to mount the amplifier to the back of your TV. 5. SCAN FOR CHANNELS ON YOUR TV: This step is very important. Your TV will NOT receive signals from the antenna without doing a channel scan. See your TV’s menu for this process.
MADE IN CHINA GE is a trademark of General Electric Company and is under license by Jasco Products Company LLC, 10 E. Memorial Rd., Oklahoma City, OK 73114. This Jasco product comes with a limited-lifetime warranty. Visit www.byjasco.com for w arranty details. Questions? Contact us at 1-800-654-8483 b etween 7:00AM—8:00PM CST.
