uPLAY TODAY SUNNYSIDE MODEL # UPLAY-020-N MODEL # UPLAY-020-P Issued/Revised: 04/16/2019 800.458.5872 www.ultraplay.
uPLAY TODAY SUNNYSIDE Dear UPlayToday™ Customer, Thank you for choosing to purchase and install a UPlayToday commercial playsystem by UltraPlay®. We appreciate the confidence you have placed in our company, and we will strive to earn your trust. This is your Owner's Manual & Assembly Instructions booklet. We have designed this manual specifically for the products that you have purchased.
uPLAY TODAY GENERAL COMMERCIAL PLAYGROUND SAFETY GUIDELINES Maintaining your playground equipment and its surrounding area is essential to minimizing the risk of injury to users as well as maximizing its useful lifespan. UPlayToday STRONGLY recommends that you follow these Safety Guidelines in conjunction with conducting periodic maintenance inspections using the accompanying Playground Maintenance Checklist. When installing your playground, always consider local conditions.
uPLAY TODAY GENERAL COMMERCIAL PLAYGROUND SAFETY GUIDELINES Install Wood Mulch (EWF) at a depth of 12". Over time this mulch will compress to a depth of 9" as required by the U.S. Consumer Product Safery Commission, ASTM standard F-1487 and Canadian Standard CAN/CSA-Z-614. For more information on the proper surfacing materials, call the CPSC hotline at 1-800-638-2772. Worn surfaces around equipment should be restored. Concrete footings should never be exposed.
uPLAY TODAY GENERAL COMMERCIAL PLAYGROUND SAFETY GUIDELINES TRIPPING HAZARDS: There should be no exposed concrete footings, abrupt changes in surface elevations, tree roots, tree stumps, and rocks, which can trip children and adults. Check for trip hazards, such as the balance beam support posts, or environmental trip hazards, such as rocks or roots in the play area. Make all necessary improvements or repairs. AFTER THE EQUIPMENT IS IN USE: -Never add components not intended for use with this product.
uPLAY TODAY GENERAL COMMERCIAL PLAYGROUND SAFETY GUIDELINES -Proper maintenance of UPlayToday equipment requires regular tightening of all bolts, nuts, set screws, and other hardware. -All equipment should be free of rust and repainted with an appropriate lead-free paint whenever necessary to deter rusting. This should also be done for any chipped or peeling areas. -Regular checking of all parts, casting, etc., should be made. If part is broken or worn it should be replaced immediately.
uPLAY TODAY GENERAL COMMERCIAL PLAYGROUND SAFETY GUIDELINES -Check for accessible sharp edges or points. Check for protruding bars, bolts, nuts, etc. Eliminate these conditions. -Check for exposed ends of tubing that should be covered with plugs or caps. -Check for loose bolts, nuts, etc. and tighten. -Check for broken or missing rails, steps, rungs, or seats and replace. Issued/Revised: 04/16/2019 800.458.5872 www.ultraplay.
uPLAY TODAY UPlayToday Warranty UltraPlay warrants its products to be free from defects in materials and/or workmanship, subject to normal usage and installation, for a period of 1-year from the date of shipment to the original purchaser. In the event of a claim under this warranty, UltraPlay will replace the component at no cost within the first 12 months from date of shipment to the original customer.
uPLAY TODAY WARRANTY EXCLUSIONS All warranties specifically exclude damage caused by man-made or natural disasters, vandalism, negligence, improper installation or improper use, modification, changes in appearance resulting from weathering, scratches, dents, discoloration, normal wear and tear, or marring as a result of public or private use.
uPLAY TODAY GENERAL INTRODUCTION TO INSTALLATION INSTRUCTIONS IMPORTANT! Please read the entire Installation Instructions packet before beginning the installation. UltraPlay has designed UPlayToday to take advantage of all Consumer Product Safety Commission (CPSC) and ASTM guidelines in force at the time of purchase in an effort to prevent playground accidents.
uPLAY TODAY GENERAL INTRODUCTION TO INSTALLATION INSTRUCTIONS TOOLS REQUIRED: UltraPlay supplies only the special wrenches and bits required to fasten the "tamper-resistant" hardware and components. You will need common wrenches and an Allen key set as well as a drill, string line, level, shovels, post hole digger, pry bar, washable felt tip marker, phillips head screw driver, utility knife, rubber mallet, and a tape measure. A power post hole digger may facilitate installation in some circumstances.
uPLAY TODAY GENERAL INTRODUCTION TO INSTALLATION INSTRUCTIONS 7. CPSC guidelines mandate that there shall be no gaps present in the playground equipment that fall between 3-1/2" and 9". The positioning of certain components by the installer can affect this criteria, so you should always measure distances created when attaching components in order to avoid these spaces which can cause entrapment of a child using the equipment.
uPLAY TODAY WARNING LABEL APPLICATION INSTRUCTIONS The enclosed Warning Labels must be affixed to your playground equipment. At least one Warning Label is needed per play structure, permanently affixed in a conspicuous location within easy view of users. INSTRUCTIONS: 1. Fully assemble and install your UPlayToday playground equipment per the accompying installatioin instructions. 2.
uPLAY TODAY TOOLS REQUIRED Issued/Revised: 04/16/2019 800.458.5872 www.ultraplay.
0 INCH 0 CM 1 2 3 2 1 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 HARDWARE REFERENCE M8 B.H.C.S. Bolts 100mm 45mm 70mm 50mm 40mm 35mm 20mm 30mm 25mm 13mm 4" 1-3/4" 2-3/4" 1-9/16" 2" 1 3/8" 3/4" 1-3/16" 1" 1/2" (33-11-0101) (33-11-0102) (33-11-0103) (33-11-0104) (33-11-0105) (33-11-0106) (33-11-0109) (33-11-0114) (33-11-0107) (33-11-0113) M8 Barrel Nut (33-11-0501) M8 Flat Washer (33-11-0300) M10 B.H.C.S.
uPLAY TODAY UPRIGHT PLACEMENT UPRIGHTS LIST DESCRIPTION QTY 7'-8" UPRIGHT 8 PART NUMBER 02-07-5025 7'-8" UPRIGHT (02-07-5025) 7'-8" UPRIGHT (02-07-5025) Issued/Revised: 04/16/2019 800.458.5872 www.ultraplay.
uPLAY TODAY USE ZONE TOP VIEW CURVED SLIDE (02-07-5005) VINE CLIMBER (02-07-5008) SQUARE DECK (02-07-5001) RAINWHEEL (02-07-5022) BELOW DECK GAME PANEL (02-07-5013) BASS DRUM (02-07-5023) BELOW DECK 4' SHIPS WHEEL PANEL (02-07-0016) 4' 38'-9" 7'8" UPRIGHTS (02-07-5025) 4FT BEANSTALK CLIMBER (02-07-5057) BONE BRIDGE (02-07-5016) ADA STEP (02-07-5000) 23'-5" MINIMUM USE ZONE* REQUIRED *The USE ZONE is the area beneath and immediately adjacent to a play structure or equipment that is designed for u
uPLAY TODAY ELEVATION VIEW 108 1/2 in 135 3/4 in ELEVATION VIEW Issued/Revised: 04/16/2019 800.458.5872 www.ultraplay.
uPLAY TODAY FOOTING DETAIL - SURFACE MOUNT (33-12-0142) DESCRIPTION CONCRETE ANCHOR Parts List QTY 57 PART NUMBER 33-11-0702 UPRIGHT POST UPRIGHT FOOTER 067 CONCRETE ANCHOR 4 in MINIMUM w/3000 PSI CONCRETE GRAVEL IMPORTANT: Never install play equipment over hard, unresilient surfaces such as asphalt, concrete, or compacted earth. It is the owner's responsibility to ensure the "minimum area required" contains an appropriate amount of resilient material to cushion accidental falls.
0 INCH 0 CM 1 2 3 2 1 4 3 5 6 7 5 4 8 9 10 11 12 6 13 14 15 FOOTING DETAIL - SURFACE MOUNT 1. Using Upright Footers as template, mark hole position on concrete. Drill 3/8" Dia. x 2" deep holes into concrete to receive anchor. 2. Attach Upright Footer to concrete using Concrete Anchor, Flat Washer, and Lock Nut. See Detail 067. LOCK NUT FLAT WASHER UPRIGHT FOOTER CONCRETE ANCHOR 067 Issued/Revised: 04/16/2019 800.458.5872 www.ultraplay.
uPLAY TODAY FOOTING DETAIL - ON GROUND (33-12-0143) DESCRIPTION GROUND SPIKE IMPORTANT: UPRIGHTS WILL COME PRE-ASSEMBLED WITH UPRIGHT FOOTER POSITIONED IN THE BOTTOM (2) HOLES TO ACCOMODATE 2" OF SURFACING. WHEN INSTALLING 12" OF SURFACING, REMOVE BOLTS AND ADJUST UPRIGHT FOOTER POSITION TO UTILIZE THE TOP (2) HOLES.
0 INCH 0 CM 1 2 3 2 1 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 FOOTING DETAIL - ON GROUND 1. With Upright Footers in position, secure each Upright Footer to the ground using Ground Spikes. NOTE: A 4lb. hammer may be required to drive spikes into the ground. Install ground spikes angled inward as shown in illustration. See Detail 068. IMPORTANT: Refer to Post Placement/Hole Locations diagram to mark locations of Upright Footers.
uPLAY TODAY FOOTING DETAIL - IN GROUND (33-12-0144) Parts List DESCRIPTION INGROUND FOOTER 3/8" x 1 1/4" P.B.H.C.S. w/PATCH 3/8" FLAT WASHER 3/8" HEX NUT QTY 19 57 57 57 PART NUMBER 02-07-0049 33-05-0019 33-02-0002 33-01-0002 UPRIGHT UPRIGHT FOOTER SURFACING 069 IMPORTANT: UPRIGHTS WILL COME PRE-ASSEMBLED WITH UPRIGHT FOOTER POSITIONED IN THE BOTTOM (2) HOLES TO ACCOMODATE 2" OF SURFACING. WHEN INSTALLING 12" OF SURFACING, REMOVE BOLTS AND ADJUST UPRIGHT FOOTER POSITION TO UTILIZE THE TOP (2) HOLES.
0 INCH 0 CM 1 3 2 1 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 FOOTING DETAIL - IN GROUND 1. Attach Inground Footer to Upright Post using 3/8" x 1 1/4" P.B.H.C.S., 3/8" Flat Washer, and 3/8" Hex Nut. Refer to Footing Table and Footing Layout page for Hole/Footer location. See Detail 069. 2. Continue assembling unit before pouring concrete. Refer to specific component installation instructions. IMPORTANT: POURING CONCRETE IS THE VERY LAST STEP! 3/8" x 1 1/4" P.B.H.C.S.
uPLAY TODAY SUNNYSIDE Parts List DESCRIPTION TUBE CLAMP PANEL CLAMP PANEL CLAMP 90° - DOUBLE 4FT ADA STEPS SQUARE DECK 4FT RIGHT CURVED SLIDE VINE CLIMBER SHIP'S WHEEL PANEL GAME PANEL BONE BRIDGE RAINWHEEL w/TUBE CLAMP BASS DRUM w/TUBE CLAMP 7'-8" UPRIGHT 4FT BEANSTALK CLIMBER QTY 10 4 1 1 2 1 1 1 1 1 1 1 8 1 PART NUMBER 02-07-0039 02-07-0040 02-07-0041 02-07-5000 02-07-5001 02-07-5005 02-07-5008 02-07-5012 02-07-5013 02-07-5016 02-07-5022 02-07-5023 02-07-5025 02-07-5057 Unless Otherwise Specified, All
uPLAY TODAY SUNNYSIDE 7'-8" UPRIGHT (02-07-5025) TUBE CLAMP (02-07-0039) PANEL CLAMP (02-07-0040) PANEL CLAMP 90° - DOUBLE (02-07-0041) RAINWHEEL (02-07-5022) 4FT ADA STEPS (02-07-5000) SHIPS WHEEL PANEL (02-07-5012) 4FT BEANSTALK CLIMBER (02-07-5057) BONE BRIDGE (02-07-5016) SQUARE DECK (02-07-5001) FINISHED ASSEMBLY MODEL # UPLAY-020-N MODEL # UPLAY-020-P SQUARE DECK (02-07-5001) BASS DRUM (02-07-5023) 4FT RIGHT CURVED SLIDE (02-07-5005) GAME PANEL (02-07-5013) VINE CLIMBER (02-07-5008) Issued/
TOP VIEW 7'-2 1/2" Vertical Dim. SUNNYSIDE (UPLAY-020) Hole No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 19 17 16 18 3 5 4 4' 6 FOOTING TABLE Hor. Dim. Ver. Dim.
uPLAY TODAY 7'-8" UPRIGHT w/CAP, CLAMP, & FOOTER 02-07-5025 Parts List DESCRIPTION 3 1/2" UPRIGHT, 7'-8" LG. UPRIGHT FOOTER HARDWARE COMPLETE M10 x 80mm (3 1/8") BHCS BOLT M10 BARREL NUT QTY 1 1 1 2 2 PART NUMBER 02-07-0144 02-07-0042 33-12-0026 33-11-0011 33-11-0401 Unless Otherwise Specified, All Units of Measure are Each Items listed below Hardware Complete line are included with Hardware Complete Number Warning: During Installation, Hardware And Small Parts Are Choking Hazards For Young Children.
uPLAY TODAY 7'-8" UPRIGHT w/CAP, CLAMP, & FOOTER 02-07-5025 3-1/2" UPRIGHT, 7'-8" LG. (02-07-0144) 063 UPRIGHT FOOTER (02-07-0042) FINISHED ASSEMBLY = INSTALLATION DETAIL Issued/Revised: 5/23/2013 800.458.5872 www.ultraplay.
0 INCH 0 CM 1 1 2 3 2 3 4 5 7 6 5 4 8 9 10 11 12 6 13 14 15 7'-8" UPRIGHT w/CAP, CLAMP, & FOOTER 02-07-5025 UPRIGHT LARGE HOLE M10 BARREL NUT (33-11-0401) M10 x 80mm (3 1/8") BHCS BOLT (33-11-0011) TOP (2) HOLES USED FOR 12" ENGINEERED WOOD FIBER BOTTOM (2) HOLES USED FOR 2" POURED IN PLACE OR RUBBER TILES FOOTER 063 Issued/Revised: 5/23/2013 800.458.5872 www.ultraplay.
uPLAY TODAY SQUARE DECK 02-07-5001 Parts List DESCRIPTION SQUARE DECK HARDWARE COMPLETE M10 x 30mm (1 3/16") BHCS BOLT M10 FLATWASHER M10 LOCK NUT QTY 1 1 4 4 4 PART NUMBER 02-07-0003 33-12-0019 33-11-0004* 33-11-0200* 33-11-0400* Unless Otherwise Specified, All Units of Measure are Each Items listed below Hardware Complete line are included with Hardware Complete Number Warning: During Installation, Hardware And Small Parts Are Choking Hazards For Young Children.
uPLAY TODAY SQUARE DECK 02-07-5001 SQUARE DECK (02-07-0003) 044 UNDERNEATH FINISHED ASSEMBLY = INSTALLATION DETAIL Issued/Revised: 4/30/2013 800.458.5872 COMPONENTS SHOWN IN HIDDEN LINES ARE SOLD SEPARATELY www.ultraplay.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 SQUARE DECK 02-07-5001 M10 FLATWASHER (33-11-0200) M10 LOCK NUT (33-11-0400) DECK FLANGE M10 x 30mm (1 3/16") BHCS BOLT (33-11-0004) 044 Issued/Revised: 4/30/2013 800.458.5872 www.ultraplay.
uPLAY TODAY TUBE CLAMP 02-07-0039 DESCRIPTION TUBE CLAMP Parts List QTY 1 PART NUMBER 02-07-0039 Unless Otherwise Specified, All Units of Measure are Each Items listed below Hardware Complete line are included with Hardware Complete Number Warning: During Installation, Hardware And Small Parts Are Choking Hazards For Young Children. Store Unused Parts Appropriately Until Assembly Is Completed.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 TUBE CLAMP 02-07-0039 M8 x 25mm (1") BHCS BOLT (33-11-0103) UPRIGHT M8 LOCK NUT (33-11-0500) M8 LOCK NUT (33-11-0500) CLAMP RIVET (33-11-0700) DRILL THROUGH PRE-DRILLED HOLE IN CLAMP INTO UPRIGHT TO INSTALL CLAMP RIVET. (33-11-0700) M8 x 25mm (1") BHCS BOLT (33-11-0103) 030 Issued/Revised: 6/3/2013 800.458.5872 www.ultraplay.
uPLAY TODAY BONE BRIDGE 02-07-5016 Parts List QTY 1 4 1 10 M10 x 25mm (1") BHCS BOLT M12 LOCKWASHER 6 14 M10 FLATWASHER M10 LOCK NUT 4 12 M8 x 25mm (1") BHCS BOLT M8 LOCKWASHER 4 8 M8 LOCK NUT CLAMP RIVET 4 DESCRIPTION BONE BRIDGE BRACKET HARDWARE COMPLETE PART NUMBER 02-07-0023 02-07-0024 33-12-0006 33-11-0003* 33-11-0203* 33-11-0200* 33-11-0400* 33-11-0103* 33-11-0301* 33-11-0500* 33-11-0700* Unless Otherwise Specified, All Units of Measure are Each Items listed below Hardware Complete line are include
uPLAY TODAY BONE BRIDGE 02-07-5016 BONE BRIDGE (02-07-0023) 029 UNDERNEATH 030 052 BRACKET (02-07-0024) 050 051 UNDERNEATH = INSTALLATION DETAIL FINISHED ASSEMBLY COMPONENTS SHOWN IN HIDDEN LINES ARE SOLD SEPARATELY Issued/Revised: 05/07/13 800.458.5872 www.ultraplay.
0 INCH 0 CM 1 1 2 3 2 4 3 5 6 7 5 4 8 9 10 11 12 6 13 14 15 BONE BRIDGE 02-07-5016 HANDRAIL M8 x 25mm (1") BHCS BOLT (33-11-0103) TUBE CLAMP UPRIGHT M8 LOCK NUT (33-11-0500) M8 x 25mm (1") BHCS BOLT (33-11-0103) M8 LOCK NUT (33-11-0500) M8 LOCKWASHER (33-11-0301) CLAMP RIVET (33-11-0700) 029 M8 x 25mm (1") BHCS BOLT (33-11-0103) 030 DRILL THROUGH PRE-DRILLED HOLE IN CLAMP INTO UPRIGHT TO INSTALL CLAMP RIVET.
0 INCH 0 CM 1 1 2 3 2 3 5 4 6 7 5 4 8 9 10 11 12 6 13 14 15 BONE BRIDGE 02-07-5016 BRACKET M12 LOCKWASHER (33-11-0203) BONE BRIDGE M10 FLATWASHER (33-11-0200) 052 M10 x 25mm (1") BHCS BOLT (33-11-0003) Issued/Revised: 05/07/13 800.458.5872 www.ultraplay.
uPLAY TODAY ADA STEPS 02-07-5000 Parts List DESCRIPTION ADA BARRIER LEFT ADA BARRIER RIGHT 1" FOOTER ADA TRANSFER STAIR ADA DECK ADA DECK SUPPORT POST ADA HANDHOLD ADA STEP 8 1/4" EXTENSION POST 15" EXTENSION POST FOOTER PLATE HARDWARE COMPLETE M10 x 25mm (1") BHCS BOLT M10 x 35mm (1 3/8") BHCS BOLT M10 x 50mm (2") BHCS BOLT M10 x 60mm (2 3/8") BHCS BOLT M10 FLATWASHER M10 LOCK NUT M8 x 25mm (1") BHCS BOLT M8 LOCKWASHER M8 LOCK NUT CLAMP RIVET QTY 1 1 4 1 1 1 1 1 2 2 2 1 13 8 4 2 32 27 12 4 8 4 PART NUMBE
uPLAY TODAY ADA STEPS 02-07-5000 7. Attach ADA Transfer Step to ADA Barriers using M10 x 25mm B.H.C.S. Bolt, M10 Flat Washer, and M10 Lock Nut. See Detail 032. 8. Attach Barrier Footer to ADA Deck Support using M10 x 35mm B.H.C.S. Bolt and M10 Lock Nut. See Detail 028. 9. Attach ADA Deck Support to under side of ADA Deck using M10 x 35 B.H.C.S. Bolt, M10 Flat Washer, and M10 Lock Nut. See Detail 031. 10. Insert Barrier Footer into ADA Handhold and secure using M10 x 35mm B.H.C.S. Bolt and M10 Lock Nut.
uPLAY TODAY ADA STEPS 02-07-5000 029 ADA BARRIER LEFT (02-07-0008) ADA BARRIER RIGHT (02-07-0010) 030 031 ADA DECK (02-07-0004) ADA HANDHOLD (02-07-0011) ADA STEP (02-07-0006) ADA TRANSFER STAIR (02-07-0005) 035 032 031 UNDERNEATH 033 UNDERNEATH UNDERNEATH 028 = INSTALLATION DETAIL Issued/Revised: 4/22/2013 800.458.5872 036 031 FINISHED ASSEMBLY 034 UNDERNEATH ADA DECK SUPPORT POST (02-07-0047) COMPONENTS SHOWN IN HIDDEN LINES ARE SOLD SEPARATELY www.ultraplay.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 ADA STEPS 02-07-5000 M10 LOCK NUT (33-11-0400) M10 x 35mm (1 3/8") BHCS BOLT (33-11-0005) BARRIER TUBE CLAMP SUPPORT POST M8 x 25mm (1") BHCS BOLT (33-11-0103) FOOTER M8 LOCKWASHER (33-11-0301) 029 028 M8 x 25mm (1") BHCS BOLT (33-11-0103) UPRIGHT M8 LOCK NUT (33-11-0500) M10 LOCK NUT (33-11-0400) M10 FLATWASHER (33-11-0200) M8 LOCK NUT (33-11-0500) M10 FLATWASHER (33-11-0200) DECK CLAMP RIVET (33-11-0700) M8 x 2
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 ADA STEPS 02-07-5000 M10 LOCK NUT (33-11-0400) DECK M10 LOCK NUT (33-11-0400) M10 FLATWASHER (33-11-0200) STAIR M10 FLATWASHER (33-11-0200) M10 x 25mm (1") BHCS BOLT (33-11-0003) DECK SUPPORT M10 FLATWASHER (33-11-0200) BARRIER M10 x 35mm (1 3/8") BHCS BOLT (33-11-0005) 032 033 M10 LOCK NUT (33-11-0400) M10 LOCK NUT (33-11-0400) M10 FLATWASHER (33-11-0200) STEP M10 FLATWASHER (33-11-0200) HANDHOLD M10 x 50mm (2")
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 ADA STEPS 02-07-5000 EXTENSION POST M10 LOCK NUT (33-11-0400) M10 x 35mm (1 3/8") BHCS BOLT (33-11-0005) LARGER HOLE FOOTER PLATE 036 Issued/Revised: 4/22/2013 800.458.5872 www.ultraplay.
uPLAY TODAY 4FT BEANSTALK CLIMBER 02-07-5057 Parts List DESCRIPTION QTY 1 FOOTER PLATE ENTRY ARCHWAY w/SOCKET 1 1 4FT BEANSTALK CLIMBER 1 EXTENSION PIPE 1 HARDWARE COMPLETE 2 CLAMP RIVET 6 M8 x 25mm (1") BHCS BOLT 2 M8 LOCKWASHER M8 LOCK NUT 4 1 M10 x 20mm (3/4") BHCS BOLT M10 x 25mm (1") BHCS BOLT 2 2 M10 x 35mm (1 3/8") BHCS BOLT 5 M10 FLATWASHER 4 M10 LOCK NUT M12 LOCKWASHER 1 PART NUMBER 02-07-0046 02-07-0161 02-07-0164 02-07-0203 33-12-1034 33-11-0700 33-11-0103 33-11-0301 33-11-0500 33-11-0002 33-11-
uPLAY TODAY 4FT BEANSTALK CLIMBER 02-07-5057 MAINTENANCE PROCEDURE: Periodically check hardware for tightness, and tighten as necessary. Always check all parts for breakage or wear, and immediately put equipment out of service until any faulty parts found are repaired or replaced. Also Check all metal parts for rust, paint loss and touch-up if necessary with paint. Check for welded areas and verify integrity.
0 INCH 1 0 CM 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 4FT BEANSTALK CLIMBER 02-07-5057 HANDRAIL M8 x 25mm (1") BHCS BOLT (33-11-0103) TUBE CLAMP UPRIGHT M8 LOCK NUT (33-11-0500) M8 x 25mm (1") BHCS BOLT (33-11-0103) M8 LOCKWASHER (33-11-0301) CLAMP RIVET (33-11-0700) DRILL THROUGH PRE-DRILLED HOLE IN CLAMP INTO UPRIGHT TO INSTALL CLAMP RIVET.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 4FT BEANSTALK CLIMBER 02-07-5057 ENTRY ARCHWAY w/SOCKET PIPE w/INSERT M12 LOCKWASHER (33-11-0203) M10 FLATWASHER (33-11-0200) M10 x 20mm (3/4") BHCS BOLT (33-11-0002) 071 CLIMBER M10 x 35mm (1 3/8") BHCS BOLT (33-11-0005) M10 LOCK NUT (33-11-0400) EXTENSION 077 Issued/Revised: 9/5/2013 800.458.5872 www.ultraplay.
uPLAY TODAY VINE CLIMBER 02-07-5008 Parts List DESCRIPTION VINE CLIMBER DECK MOUNTING BRACKET VINE CLIMBER EXTENSION POST-LONG VINE CLIMBER EXTENSION POST-SHORT FOOTER PLATE GRAB BAR TUBE CLAMP HARDWARE COMPLETE M10 x 20mm (3/4") BHCS BOLT M10 x 25mm (1") BHCS BOLT M12 LOCKWASHER M10 FLATWASHER M10 x 35mm (1 3/8") BHCS BOLT M10 LOCK NUT M8 x 25mm (1") BHCS BOLT M8 LOCKWASHER M8 LOCK NUT CLAMP RIVET QTY 1 1 2 2 2 2 4 1 3 4 4 7 2 5 12 4 8 4 PART NUMBER 02-07-0032 02-07-0085 02-07-0097 02-07-0098 02-07-0046
uPLAY TODAY VINE CLIMBER 02-07-5008 NOTE: THE VERTICAL POSITION OF THE GRAB BARS MUST BE A MINIMUM OF 38" ABOVE THE DECK. THE CLAMP POSITION CAN BE ADJUSTED HIGHER TO AVOID INTERFERENCE WITH OTHER CLAMPS. 7. Attach Tube Clamp to Upright using M8 x 25mm B.H.C.S. Bolt and M8 Lock Nut. Once all clamps are on and secure drill Ø1/4" hole through Clamp and Upright to install Clamp Rivet. See Detail 030. (Do not Install Clamp Rivet until entire unit is assembled) 8.
0 INCH 0 CM 1 1 2 3 2 3 5 4 6 7 5 4 8 9 10 11 12 6 13 14 15 VINE CLIMBER 02-07-5008 M8 x 25mm (1") BHCS BOLT (33-11-0103) HANDRAIL UPRIGHT M8 LOCK NUT (33-11-0500) TUBE CLAMP M8 x 25mm (1") BHCS BOLT (33-11-0103) M8 LOCKWASHER (33-11-0301) CLAMP RIVET (33-11-0700) DRILL THROUGH PRE-DRILLED HOLE IN CLAMP INTO UPRIGHT TO INSTALL CLAMP RIVET.
0 INCH 1 0 CM 1 2 3 2 3 5 4 6 7 5 4 8 9 10 11 12 6 13 14 15 VINE CLIMBER 02-07-5008 ROTOMOLD DECK DECK MOUNTING BRACKET M10 FLATWASHER (33-11-0200) M10 x 25mm (1") BHCS BOLT (33-11-0003) M10 FLATWASHER (33-11-0200) EXTENSION POST M12 LOCKWASHER (33-11-0203) ROTOMOLD M12 LOCKWASHER (33-11-0203) 041 M10 x 25mm (1") BHCS BOLT (33-11-0003) 042 Issued/Revised: 4/26/2013 800.458.5872 www.ultraplay.
uPLAY TODAY PANEL CLAMP - SINGLE 02-07-0040 DESCRIPTION PANEL CLAMP Parts List QTY 1 PART NUMBER 02-07-0040 Unless Otherwise Specified, All Units of Measure are Each Items listed below Hardware Complete line are included with Hardware Complete Number Warning: During Installation, Hardware And Small Parts Are Choking Hazards For Young Children. Store Unused Parts Appropriately Until Assembly Is Completed.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 PANEL CLAMP - SINGLE 02-07-0040 M8 x 25mm (1") BHCS BOLT (33-11-0103) UPRIGHT M8 LOCK NUT (33-11-0500) M8 LOCK NUT (33-11-0500) CLAMP RIVET (33-11-0700) DRILL THROUGH PRE-DRILLED HOLE IN CLAMP INTO UPRIGHT TO INSTALL CLAMP RIVET. (33-11-0700) M8 x 25mm (1") BHCS BOLT (33-11-0103) 025 Issued/Revised: 6/4/2013 800.458.5872 www.ultraplay.
uPLAY TODAY 4FT.
uPLAY TODAY 4FT. CURVED SLIDE 02-07-5005 6. Clean out slots in Deck with utility knife if necessary. 7. Attach Slide to Deck using M10 x 20mm B.H.C.S, M12 Lock Washer, and M10 Flat Washer. See Detail 058. 8. Attach Slide Hood to Slide using M10 x 60mm B.H.C.S, M12 Lock Washer, and M10 Flat Washer. See Detail 059. 9. Attach Bottom of Slide Hood to Deck using M8 x 40mm B.H.C.S, M8 Flat Washer, and M8 Lock Nut. See Detail 060. 10. Attach Slide Hood to Panel Clamp using M8 x 20mm B.H.C.S. and M8 Barrel Nut.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 4FT. CURVED SLIDE 02-07-5005 PLATFORM MOUNTING BRACKET M10 x 35mm (1 3/8") BHCS BOLT (33-11-0005) M8 x 25mm (1") BHCS BOLT (33-11-0103) M8 LOCK NUT (33-11-0500) M8 LOCK NUT (33-11-0500) CLAMP RIVET (33-11-0700) M10 LOCK NUT (33-11-0400) DRILL THROUGH PRE-DRILLED HOLE IN CLAMP INTO UPRIGHT TO INSTALL CLAMP RIVET.
0 INCH 0 CM 1 1 3 2 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 4FT.
0 INCH 1 0 CM 1 3 2 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 4FT. CURVED SLIDE 02-07-5005 UPRIGHT M8 BARREL NUT (33-11-0501) PANEL PANEL CLAMP M8 x 20mm (3/4") BHCS BOLT (33-11-0102) SLIDE 061 CENTER SUPPORT POST M10 FLATWASHER (33-11-0200) M12 LOCKWASHER (33-11-0203) M10 x 20mm (3/4") BHCS BOLT (33-11-0002) 062 Issued/Revised: 5/1/2017 800.458.5872 www.ultraplay.
uPLAY TODAY RAIN WHEEL w/TUBE CLAMP 02-07-5022 Parts List DESCRIPTION QTY 1 RAINWHEEL ASS'Y BONGO DRUMS TUBE CLAMP 1 PART NUMBER 02-07-0012 02-07-0056 Unless Otherwise Specified, All Units of Measure are Each Items listed below Hardware Complete line are included with Hardware Complete Number Warning: During Installation, Hardware And Small Parts Are Choking Hazards For Young Children. Store Unused Parts Appropriately Until Assembly Is Completed.
uPLAY TODAY RAIN WHEEL w/TUBE CLAMP 02-07-5022 UPRIGHT RAIN WHEEL ASS'Y (02-07-0012) 030 = INSTALLATION DETAIL Issued/Revised: 10/1/2018 800.458.5872 FINISHED ASSEMBLY COMPONENTS SHOWN IN HIDDEN LINES ARE SOLD SEPARATELY www.ultraplay.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 RAIN WHEEL w/TUBE CLAMP 02-07-5022 M8 x 25mm (1") BHCS BOLT (33-11-0103) UPRIGHT M8 LOCK NUT (33-11-0500) M8 LOCK NUT (33-11-0500) CLAMP RIVET (33-11-0700) DRILL THROUGH PRE-DRILLED HOLE IN CLAMP INTO UPRIGHT TO INSTALL CLAMP RIVET. (33-11-0700) M8 x 25mm (1") BHCS BOLT (33-11-0103) 030 Issued/Revised: 10/1/2018 800.458.5872 www.ultraplay.
uPLAY TODAY BASS DRUM w/TUBE CLAMP 02-07-5023 Parts List DESCRIPTION QTY BASS DRUM BRACKET 1 2 TUBE CLAMP BASS DRUM 1 HARDWARE COMPLETE 1 M8 x 25mm (1") BHCS BOLT 6 2 M8 LOCKWASHER 7 M8 LOCK NUT 3 M8 x 20mm (3/4") BHCS BOLT M8 FLATWASHER 6 2 CLAMP RIVET PART NUMBER 02-07-0091 02-07-0039 02-07-0013 33-12-0021 33-11-0103 33-11-0301 33-11-0500 33-11-0102 33-11-0300 33-11-0700 Unless Otherwise Specified, All Units of Measure are Each Items listed below Hardware Complete line are included with Hardware Complet
uPLAY TODAY BASS DRUM w/TUBE CLAMP 02-07-5023 029 UNDERNEATH BASS DRUM BRACKET (02-07-0091) 053 030 BASS DRUM (02-07-0013) = INSTALLATION DETAIL Issued/Revised: 5/7/2013 800.458.5872 FINISHED ASSEMBLY COMPONENTS SHOWN IN HIDDEN LINES ARE SOLD SEPARATELY www.ultraplay.
0 INCH 0 CM 1 1 2 3 2 3 4 5 7 6 5 4 8 9 10 11 12 6 13 14 15 BASS DRUM w/TUBE CLAMP 02-07-5023 HANDRAIL M8 x 25mm (1") BHCS BOLT (33-11-0103) TUBE CLAMP UPRIGHT M8 LOCK NUT (33-11-0500) M8 x 25mm (1") BHCS BOLT (33-11-0103) M8 LOCK NUT (33-11-0500) M8 LOCKWASHER (33-11-0301) CLAMP RIVET (33-11-0700) DRILL THROUGH PRE-DRILLED HOLE IN CLAMP INTO UPRIGHT TO INSTALL CLAMP RIVET.
uPLAY TODAY PANEL CLAMP 90° - DOUBLE 02-07-0041 Parts List DESCRIPTION QTY 1 PANEL CLAMP 90° DOUBLE PART NUMBER 02-07-0041 Unless Otherwise Specified, All Units of Measure are Each Items listed below Hardware Complete line are included with Hardware Complete Number Warning: During Installation, Hardware And Small Parts Are Choking Hazards For Young Children. Store Unused Parts Appropriately Until Assembly Is Completed.
0 INCH 0 CM 1 1 2 3 2 3 4 5 6 7 5 4 8 9 10 11 12 6 13 14 15 PANEL CLAMP 90° - DOUBLE 02-07-0041 PANEL CLAMP 90° - DOUBLE (02-07-0041) M8 LOCK NUT (33-11-0500) DRILL THROUGH PRE-DRILLED HOLE IN CLAMP IN UPRIGHT TO INSTALL CLAMP RIVET. (33-11-0700) M8 x 25mm (1") BHCS BOLT (33-11-0103) 065 Issued/Revised: 06/04/13 800.458.5872 www.ultraplay.
uPLAY TODAY SHIP'S WHEEL PANEL 02-07-5012 Parts List DESCRIPTION SHIP'S WHEEL PANEL HARDWARE COMPLETE CLAMP RIVET M8 x 25mm (1") BHCS BOLT M8 x 55mm (2 3/16") BHCS BOLT M8 LOCK NUT M8 BARREL NUT M10 x 20mm (3/4") BHCS BOLT M10 FLATWASHER M12 LOCKWASHER QTY 1 1 2 4 2 4 2 2 2 2 PART NUMBER 02-07-0016 33-12-0034 33-11-0700 33-11-0103 33-11-0110 33-11-0500 33-11-0501 33-11-0002 33-11-0200 33-11-0203 Unless Otherwise Specified, All Units of Measure are Each *Items listed below Hardware Complete line are inclu
uPLAY TODAY SHIP'S WHEEL PANEL 02-07-5012 SHIP'S WHEEL PANEL (02-07-0016) 027 026 UNDERNEATH = INSTALLATION DETAIL Issued/Revised: 4/12/2013 800.458.5872 FINISHED ASSEMBLY COMPONENTS SHOWN IN HIDDEN LINES ARE SOLD SEPARATELY www.ultraplay.
0 INCH 0 CM 1 1 2 3 2 3 5 4 6 7 5 4 8 9 10 11 12 6 13 14 15 SHIP'S WHEEL PANEL 02-07-5012 M8 x 25mm (1") BHCS BOLT (33-11-0103) UPRIGHT M10 x 20mm (3/4") BHCS BOLT (33-11-0002) M10 FLATWASHER (33-11-0200) M12 LOCKWASHER (33-11-0203) M8 LOCK NUT (33-11-0500) M8 LOCK NUT (33-11-0500) DECK THREADED INSERT CLAMP RIVET (33-11-0700) PANEL M8 x 25mm (1") BHCS BOLT (33-11-0103) 026 DRILL THROUGH PRE-DRILLED HOLE IN CLAMP INTO UPRIGHT TO INSTALL CLAMP RIVET.
uPLAY TODAY GAME PANEL 02-07-5013 Parts List DESCRIPTION ACORN - LEAF PANEL HARDWARE COMPLETE M10 x 20mm (3/4") BHCS BOLT M12 LOCKWASHER M10 FLATWASHER M8 x 25mm (1") BHCS BOLT M8 x 55mm (2 3/16") BHCS BOLT M8 LOCK NUT M8 BARREL NUT CLAMP RIVET QTY 1 1 2 2 2 4 2 4 2 2 PART NUMBER 02-07-0020 33-12-0034 33-11-0002* 33-11-0203* 33-11-0200* 33-11-0103* 33-11-0110* 33-11-0500* 33-11-0501* 33-11-0700* Unless Otherwise Specified, All Units of Measure are Each *Items listed below Hardware Complete line are inclu
uPLAY TODAY GAME PANEL 02-07-5013 ACORN-LEAF PANEL (02-07-0020) 027 025 026 UNDERNEATH = INSTALLATION DETAIL FINISHED ASSEMBLY COMPONENTS SHOWN IN HIDDEN LINES ARE SOLD SEPARATELY Issued/Revised: 04/11/13 800.458.5872 www.ultraplay.
0 INCH 0 CM 1 1 2 3 2 4 3 5 6 7 5 4 8 9 10 11 12 6 13 14 15 GAME PANEL 02-07-5013 M8 x 25mm (1") BHCS BOLT (33-11-0103) UPRIGHT M10 x 20mm (3/4") BHCS BOLT (33-11-0002) M8 LOCK NUT (33-11-0500) M12 LOCKWASHER (33-11-0203) M10 FLATWASHER (33-11-0200) M8 LOCK NUT (33-11-0500) CLAMP RIVET (33-11-0700) M8 x 25mm (1") BHCS BOLT (33-11-0103) DECK DRILL THROUGH PRE-DRILLED HOLE IN CLAMP INTO UPRIGHT TO INSTALL CLAMP RIVET.