Safety data sheet

ManualsBrandsULTRALIFE ManualsBatteriesNon-standard battery AA Lithium Lithium Mignon HighPower 3.6 V 2000 mAh 1 pc(s)

- Page 1/5 - MSDS Li-SOCl

Rev 2.Dec.2004

MATERIAL SAFETY DATA SHEET

(form according to EEC Directive 93/112/EC)

1. Identification of the product and supplier

Identification of the product: ER14505M Lithium, Thionyl Chloride (Li-SOCl2)

non-rechargeable batteries

Manufacturer: Able New Energy Co., Ltd

Address: ABLE Industrial Zone,Xintang Village,

Guanlan Town, Baoan District,

Shenzhen, China 518110

Telephone: +86-755-29807563

Fax: +86-755-29807510

e-mail: able@able-battery.com

2. Composition and information about the ingredients

Active materials

Appr . Percent of Total Weight (%)

Lithium (Li) 4.29 (0.727g)

Carbon black (C) 4.18

Thionyl chloride (SOCL2) 30.73

Lithium aluminum tetrachloride

(LiAlCl4)

4.89

Passive materials

Appr . Percent of Total Weight (%)

Base Metal Steel 50.8

Others Plastic 3.23

Glass fiber 1.88

3. Hazards identification

The lithium-thionyl chloride batteries are not hazardous when used according to the

recommendations of the manufacturer.

But if the design of the circuit doesn’t forecast all the necessary cares to prevent the

inversion of polarity in the assembly of the battery or the battery bt packs, there is the risk

of dangers due to the explosion of the battery.

Define with care the assembling process to assure that accidental short circuit don’t

happen.

Summary of content (5 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET (form according to EEC Directive 93/112/EC) 1. Identification of the product and supplier Identification of the product: Manufacturer: Address: Telephone: Fax: e-mail: ER14505M Lithium, Thionyl Chloride (Li-SOCl2) non-rechargeable batteries Able New Energy Co., Ltd ABLE Industrial Zone,Xintang Village, Guanlan Town, Baoan District, Shenzhen, China 518110 +86-755-29807563 +86-755-29807510 able@able-battery.com 2.
PAGE 2
Do not expose the batteries to temperatures above 100°C. If the battery lose its integrity and sealing, due to break or damages (mechanical, thermal or electrical), leakage, explosion or fire may follow. In this case there is the risk of release of chemical materials as defined in the paragraph 2 (active materials) of this safety sheet. Here below are shown the nature of special risks and the advices of caution.
PAGE 3
6. Accidental release measures In case of break of a battery, all the people must go away from the place where the incident happened and come back only after the dissolution of the irritating gas. Broken batteries or battery packs must be covered with sodium carbonate (Na2CO3) or dry sand, place them in approved container and dispose in accordance with local regulation. For the eventual handling use gloves in Viton®. 7. Handling and storage 7.
PAGE 4
8. Exposure controls/personal protection If the battery is integral, storage and handle with care, there is any dangers. It is suggested to handle the batteries in a ventilated place, to don’t smoke, eat or drink during the assembling. 9. Physical and chemical properties Appearance: The battery ER14505M is a metal cylinders with diameter 14,2mm and height 50,5 mm, fitted with an external plastic sleeve. 10. Stability and reactivity 10.1 Conditions to avoid: Do not expose at temperature higher than 100°C.
PAGE 5
14. Transport information Restriction for the transport: class 9 in accordance to the United Nation regulation. International convention Road transport: not hazardous in accordance to ADR Rail transport: not hazardous in accordance to RID Sea transport: not hazardous in accordance to IMDG Air transport: not hazardous in accordance to ICAO Note: the batteries which contain few than 0,5g of metal lithium are not restricted for transport. 15.