UIOT/QR4120 Intelligent thermostat operating manual Shanghai Unisplendor Lelian Internet of Things Technology Co.
Document revision history DATA Version Description Author 2019-10-09 V1.0.
Intelligent thermostat 1 Product Features 1.1. Functional description 1、Control external equipment based on control4 system wiring mode; 2、By connecting with the external equipment, it can control the cooling, heating, fresh air and alarm indicator light of the external equipment; 3 、 Remote power off function ( Operate through mobile APP ) Notice:The power supply of this product is 24VAC.
2 2.1.
2.2. 产品接线孔位图 Product wiring hole bitmap 2.3.
3 3.1. Installation procedure Installation requirements 1、The cover of the product is American UL standard junction box 2、Install the cassette with American UL standard junction box and position adjustment function 3、Do not install outdoors 3.2. Product installation steps 1、Cut off the mains power 2、24VAC power supply is connected in RC(R can be shortconnected with RC, or separately provide heat supply control for the equipment), and C is connected as the common terminal of 24VAC negative electrode.
4、Fix the bottom case on the interior wall cassette with screws, pay attention to the mounting direction 5、Align the top of the panel with the bottom shell and place in the bayonet
6、Press the lower end of the panel to the bottom case to complete the product installation
Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ISED CAN ICES-3 (B)/NMB-3(B) Canadian Compliance Statement This device complies with Industry Canada licenseexempt RSSs. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.