User Manual

Operation

Preference page

Auto Scanning Setting

Note: If your scanner does not have one touch button feature, you will not be

able to use this function.

Auto Scanning is a fully automatic function, which enables you to perform a complete scan at

your fingertips. By checking the "Enable auto scanning" option in the Auto Scanning Setting area,

the auto scanning function will be enabled. Please note that the default settings for Auto

Scanning Setting appears as follows.

PAGE 1
Operation Preference page Auto Scanning Setting Note: If your scanner does not have one touch button feature, you will not be able to use this function. Auto Scanning is a fully automatic function, which enables you to perform a complete scan at your fingertips. By checking the "Enable auto scanning" option in the Auto Scanning Setting area, the auto scanning function will be enabled. Please note that the default settings for Auto Scanning Setting appears as follows.
PAGE 2
The steps for auto scanning are: 1. Open the TWAIN source window. 2. Locate the Auto Scan button which is situated in the front panel of the scanner 3. Press the Auto Scan button. The scanner will start the scanning process. 4. The scanner will perform the auto area detect function if the "Prescan Image Area Auto Detection" option is checked to define the actual area of your scanned image. Later, this defined area will be used for the final scan.
PAGE 3
Color/Gray Depth Some application programs are not capable of processing 36-bit color and 12-bit gray image data. If you select 36/12 bits option, your scanned image may be abnormal or your system may be crashed. Please check whether your image processing program supports 36/12 bits image data. We would like to suggest that you check the 24/8 bits option. For more information about image data, refer to the user's manual of your application program.