Specifications

ManualsBrandsulefone ManualsAudio EquipmentTRUE WIRELESS EARBUDS

2.4GHz 2012 Chip Antenna:2012F245C02

第 1 页共 5 页

Application:

WLAN, 802.11b/g, Bluetooth, etc…

Features

SMD, high reliability, ultra Impact, Omni-directional…

Part number

RANT 2012 F 245

(1) (2) (3) (4)

C02

(5)

(1)Product Type

Chip Antenna

(2)Size Code

2.0x1.2mm

(3)Type Code

(5)Frequency

2.45GHz

(6)Internal code

C02

Electrical Specification

Working Frequency Range

2400 ~2484 MHz

Peak Gain

1.53 dBi (Typ.)

Impedance

50 Ohm

Return loss

10 dB ( Min)

Polarization

Linear

Azimuth Beamwidth

Omni-directional

Operation Temperature(℃)

-40 ~85℃

The specification is defined on EVB.

Dimension and Terminal Configuration

No.

Terminal Name

Feeding/GNG

GND/Feeding

P.S : Top & down and left & right

side are symmetrical, No direction

咏成國際科技有限公司電話

: 13530576606

RAIN International Technology Co., Ltd.

TEL: 13530576606

Dimension (mm)

2.05+-0.15

1.20+-0.15

0.50+-0.10

0.20+-0.10

Summary of content (5 pages)

PAGE 1
2.4GHz 2012 Chip Antenna:2012F245C02 Application: WLAN, 802.11b/g, Bluetooth, etc… Features SMD, high reliability, ultra Impact, Omni-directional… Part number RANT 2012 F 245 (1) (3) (4) (2) C02 (5) (1)Product Type Chip Antenna (2)Size Code 2.0x1.2mm (3)Type Code F (5)Frequency 2.45GHz (6)Internal code C02 Electrical Specification Working Frequency Range 2400 ~2484 MHz Peak Gain 1.53 dBi (Typ.
PAGE 2
.4GHz 2012 Chip Antenna:2012F245C02 Evaluation Board Reference PCB Dimension Antenna Layout Reference Unit :mm Unit :mm Electrical Characteristics Return Loss & Radiation Trc2 dB Mag 10 dB / Ref 0 dB Invisible Loss Return Trc3 1 dB Mag 10 dB / Ref 0 dB Cal int Offs M 1 2.4000 00 GHz -10.77 6 dB M 2 2.4420 00 GHz -24.81 2 dB M 3 2.484000 GHz -10.
PAGE 3
2.4GHz 2012 Chip Antenna:2012F245C02 Taping Specifications Reel and Taping Specification Reel Specification TYPE SIZE 2012 7” ψB A 5K/Reel 2.0±0.5 13.5±1.0 ψC ψD 21±1.0 60±1.0 ψM W 11.5±2.0 178±2.0 Tapping Specification Packaging Type A B W E F G H T ψD P +0.10 Paper Type 3216 1.90±0.20 3.50±0.20 8.0±0.20 1.75±0.10 3.5±0.05 4.0±0.10 2.0±0.05 0.75±0.10 1.50 -0 第3页共5页 4.0±0.
PAGE 4
2.4GHz 2012 Chip Antenna:2012F245C02 Reliability Table Test Item Procedure Electrical Characterization Requirements Ceramic Type Remark (Reference) Fulfill the electrical specification User Spec. Thermal Shock 1. Preconditioning: 50 ± 10℃ / 1 hr , then keep for 24 ± 1 hrs at room temp. 2. Initial measure: Spec: refer Initial spec. 3. Rapid change of temperature test: -30℃ to +85℃; 100 cycles; 15 minutes at Lower category temperature; 15 minutes at Upper category temperature. No Visible Damage.
PAGE 5
2.4GHz 2012 Chip Antenna:2012F245C02 Board Flex (SMD) 1. Mounting method: IR-Reflow. PCB Size (L:100 × W:40 × T:1.6mm) 2. Apply the load in direction of the arrow until bending reaches 2 mm. No Visible Damage. AEC-Q200 005 Adhesion Force of 1.8Kg for 60 seconds. No Visible Damage Magnification of 20X or greater may be employed for inspection of the mechanical integrity of the device body terminals and body/terminal junction.