Note 6T Smart phone Quick Start Guide
1.
2. BEFORE USING The phone is a Dual SIM mobile that allows you to use two mobile networks. Insert SIM cards and SD card 1) Switch off the mobile phone, then remove the cover as shown in the figure. 2) Remove the battery, and install SIM and SD cards, place the cards with chip facing downwards, and then slide it into its slot. Make sure that it is correctly inserted.
✓ Note: SD card can be used as internal storage. Option 1: Notification Center--> Tap the notice to set up-->Use for extra phone storage ->Next--> Format(For apps,files and media on this phone only) Option 2: Notification Center--> Tap the notice to set up-->Use for portable storage >Next ->Done(For transferring files and media between devices) ✓ Note: • Do not remove the cards while the device is transferring data. Doing so may cause data to be lost or damage to the cards and device.
Basic Function • Turn on the phone Press and hold the power key for a while to turn on the phone. • Turn off the phone Long press the power key until a menu shows. Choose “Power off’’to turn off the phone. • Restart the phone Long press the power key until a menu shows. Choose “Restart’’to restart the phone. • Lock the screen Option 1: Press the power key to turn off the screen and lock it Option 2: The screen will auto lock if you don't use the phone for a while.
5. WARNING Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.