UIOT/QR4120 《Pan-tilt camera》 Manual SHANGHAI UNISPLENDOR LELIAN INTERNET OF THINGS TECHNOLOGY CO.,LTD.
Pan-tilt camera 1 Step 1.1. Camera connection Please connect the camera with the power adapter ,as shown in the following figure.The camera takes about a minute to boot up. Note: indoor camera :You will hear the machine speak continuously “dingdong -- dingdong ---”, This means the machine is ready to pair up to connect to WiFi. Outdoor camera: you will not hear any sound because the outdoor camera needs to be connected to the Internet cable . 1. The camera supports 2.
Attention : If the subnet mask does not match on the search tool, please click “IP Match ” ,Double-click th e camera's IP address in the search tool , The login screen will appear in your default browser, as shown below : Attention : The default username and password is "admin" ( For security, please modify your account information after logging in ) Please enter the correct username and password when the login screen appears Support Max 4 visitors at the same time (First Stream:2 visitors;Second Stream:2
(If th is isn't your first time, click on "PC view" to se e video). B. Refresh the page and log in again , The video will be shown , as follows : Real-time video playback interface 1.2. Product installation requirements 1. Install the product as close to the intelligent server as possible 2. Because this product is wireless, considering the communication dis tance, the us er should decide whe ther to use the wireless repeater or not according to the actual debugging situation 3.
2 Mobile client use steps 2.1. Connect to network 1. After the normal power supply of the device, connect the smart server, register and log in the smart home app. as following picture shows: Click on the area shown by the arrow in the lower right corner “Me”.
2. Enter the screen as shown in the figure below, and click "device management" at the red arrow in the upper left corner of the screen as shown in the figure below.
3. Enter the device management interface as shown in the figure below, and click "+" in the upper right corner of the screen to add the device. 4. Enter the device type selection interface as shown in the figure below, find the red arrow position "video" and click to enter the next step.
5. In the "select device type" interface, find the "camera" icon and click to go to the next step.
6. Click to enter the "add camera" interface, and follow the prompts to enter the network. When entering the network, the device must first set up a room.
entering the network, the device can be put into the room that has been created and named to facilitate operation and management.
7. After creating a room, you can find the room you created and the equipment you have netted in the room. In the room to view video, capture, motion detection shortcut operation.
3 Equipment operation instructions 3.1. detailed description 1. Video recording, Shouting and capturing can be done on the APP after the camera is normally connected.
2. Add scenarios to the device control page.
3. Click the button in the upper right corner of the device control page to switch between horizontal and vertical screens.
4.
3.1.1.
3.1.2. Device Settings You can set the device image rollover, motion detection. Turn on the motion detection switch -> Selected time period -> Choose video or snapshot, When triggered, the APP will receive the push message "my smart server at home, your living room camera detects movement and has recorded", and can view the video or capture pictures.
3.1.3.
3.1.4. motion detection You can view the history of motion detection. Click the page motion detection button to view the list of events for motion detection. “.” Red represents not viewed, green represents viewed, click to view. Note: motion detection requires camera support.
3.1.5. Operating Record In this page, you can view the history of the operation of the device. Not e: the contents of this manual and specifications of this prod uct are subj ect to change wit ho ut pri or noti ce.
FCC Instructions: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IC Notice: In addition to containing other required statements specified elsewhere in this standard or in the applicable RSS, user manuals for licence-exempt radio apparatus shall contain the following text, or an equivalent notice, that shall be displayed in a conspicuous location, either in the user manual or on the device, or both: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).