User's Manual

Standalone Access Control
User Manual
HBK-A01
1 Packing List
Name
Quantity
Remarks
Access Keypad
1
User Manual
1
Plastic Anchors
4
Ø6mmx25mm, used for fixing
Self-Tapping Screw
4
Ø4mmx25mm, used for fixing
2 Introduction
This RFID card access control unit controls 1 door, and it uses ST MCU assuring stable performance and low-power circuit
makes long service life. OMRON power relay with 10A switching capacity provides an excellent switching performance for
electric locks. It is widely used in factories, houses, residential quarters, offices, mechanical and electrical control
equipment and so on.
3 Features
Full programming from the keypad.
Supports Card, PIN, Card + PIN, Card or PIN.
Can be used as standalone keypad.
Adjustable door open time.
Very low power consumption.
Lock output current short circuit protection.
With bell function, supports external bell.
Built-in buzzer.
Red, blue, white, yellow and green LED indicators display the working status.
4 Specifications
Operating Voltage
12VDC
Lock Output Load
Max. 1.5A
Card Capacity
500
Card Type
Standard 125KHz EM
PIN Capacity
500
Door Relay time
0-99 seconds
Card Reading Distance
Max. 6cm
Operating Temperature
-40 ℃〜60 ℃
Idle Current
50mA
Operating Humidity
10%-90%RH
Waterproof
No
Shell Material
PC + ABS
Product Weight
100g
Shell Size
100x100x18.5mm
Wiring Connections
Electric Lock, Exit Button, External Bell
5 Installation
Remove the back cover from the keypad
Drill 4 holes on the wall for the self-tapping screws and 1 hole for the cable
Put the supplied rubber plugs into the 4 holes
Fix the back cover firmly on the wall with 4 self-tapping screws
Thread the cable through the cable hole
Attach the keypad to the back cover