User's Manual

Quick Installation & Start Guide

The UgMO UG1000B-A Bridge is part of the UG1000 family of products. The Bridge is responsible for

making the internet connection between the UG1000 system and UgMO Knows.

• Remote configuration and alert reporting

• Software upgradeable to allow for future feature

expansion

• Embedded Linux processor provides smart device

intelligence

PAGE 1
Quick Installation & Start Guide The UgMO UG1000B-A Bridge is part of the UG1000 family of products. The Bridge is responsible for making the internet connection between the UG1000 system and UgMO Knows.
PAGE 2
UG1000 Internet Bridge The UG1000B-A Internet Bridge serves as the gateway or avenue by which all network and sensor data is passed to the UgMO Data Base. Each Bridge contains an embedded Linux processor. The bridge also serves as a repeater in any network and can forward data packets toward their final destinations. To install the Bridge, you will need a 110 Volt AC power source that is near a router or other direct Ethernet connection.
PAGE 3
Regulatory Notices FCC ID: YVAUG1000BA; IC ID: 10216A-UG1000BA M/N: UG1000B-A This device complied with Part 15 of the FCC Rules and Industry Canada License Exempt RSS Standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.