UCLEARTM Helmet Communicator HBC 100 User Manual
Welcome to UCLEARTM HBC100 Helmet Communicator User Manual UCLEARTM 1
Note UCLEARTM 2
Contents Contents --------------------------------------------Quick User Guide -----------------------------------Warnings and Safety Instructions -----------------Features --------------------------------------------Installation -----------------------------------------General Operations --------------------------------Mobile Phone Operations --------------------------Music Streaming Operations ----------------------Intercom Operations ------------------------------Button Configurations Summary ----------
Quick User Guide Your HBC100 at a glance Answer button Up button Speaker / charging socket Status indicator Down button GENERAL FUNCTIONS Before using your HBC100 please charge it first! Attach Charger Charge o To charge, use the provided charging cable connecting it either to a USB port or to the adaptor provided. o While charging, the status indicator would show red. o Upon fully charged, the status indicator would show blue.
Quick User Guide Power On Reset o Hold Answer for 2 seconds. o Press all 3 buttons together. Power Off o Hold Answer for 5 seconds. Volume Up Volume Down o Press Up once. o Press Down once. *NOTE: The volumes for mobile phone, music and intercom functions are controlled separately. MOBILE PHONE FUNCTIONS Pairing your HBC100 with your mobile phone Pairing o Hold Up and Down buttons together for 2 seconds. The status indicator would alternately blink blue and red.
Quick User Guide Answer Incoming Call Last Number Redial o Use voice pickup, say ‘hello’ or ‘pickup’. OR o Manually press Answer button once. o Hold Answer and Up button for 2 second. Reject/ End Incoming Call o Hold Answer button for 2 seconds. 3 Way Calling Voice Dial o To swap between 2 concurrent calls, press the Answer button once. o Hold Answer and Down button for 2 second. MUSIC STREAMING FUNCTIONS *NOTE: For music dongles you would need to pair the music dongle before using it with HBC100.
Quick User Guide Backtrack Fast Forward o Press the Down button 2 times. o Press the Up button 2 times. INTERCOM FUNCTIONS Pairing your HBC100 to another HBC100 Helmet 1 (Master Unit) Helmet 2 (Secondary Unit) Pairing (Needs to be done once) o The helmet communicator needs to be switched off before performing the following steps: Press Answer and Down buttons for 5 seconds on helmet 1 & press Answer and Up buttons for 5 seconds on helmet 2.
Warnings and Safety Instructions ! icons to highlight This manual uses the and certain instructions. Below is an explanation of the icons. ! Attention - This icon highlights special instructions and precautions intended to avoid damage to the system. Non-compliance may void the product warranty. Warning - This icon provides precautions important to prevent injuries to the user.
Warnings and Safety Instructions - Prolonged exposure to loud sounds may lead to permanent hearing damage. - Do not attempt to place an outgoing call through the mobile phone while riding on the motorcycle at any point of time. - Please do not use the UCLEARTM helmet communicator in anyway that may distract you or hinder your judgment whilst on the move. Never ever compromise your safety and the safety of others.
Features The UCLEARTM helmet communicator has three main functions: to make mobile phone calls, to listen to music entertainment by wireless Bluetooth and for intercom talk. Mobile Phone Functions • Bluetooth phone audio capabilities, HFP & HSP Profile. • Voice activated call pick up. Music Streaming Functions • Bluetooth music streaming with hi-fi and stereo capabilities, A2DP Profile. • Bluetooth Audio/Video Remote Control capability, AVRCP profile.
Installation The UCLEARTM HBC100 helmet communicator package contains: o A UCLEARTM HBC100 helmet communicator control unit o A pair of hi-fi stereo headset with embedded microphones o Velcro for speakers o A clip bracket and anti slip rubber patch o A metal mounting bracket with double sided tape o An AC charger and USB charging cable o A user manual Install Speakers • Use the velcros to install the speakers into the ear cavity of the helmet. • The microphones MUST be placed facing out.
Installation Your UCLEARTM HBC100 helmet communicator package comes with 2 types of mounting bracket: a clip bracket and a metal mounting bracket. Use either of the brackets to install the HBC100 control unit onto your helmet. Install Clip Bracket • Position and fasten the clip bracket onto the helmet. • When in the correct position, the clip bracket should be firmly secured onto the helmet. • Use additional anti slip rubber patch provided if required.
Installation Install Metal Mounting Bracket • Identify a position on the helmet to adhere the Metal Mounting Bracket. • Peel off the double sided tape protective film. • Carefully place the Metal Mounting Bracket onto the position identified in step 1. (You may only do this step once) • Apply slight pressure onto the metal mounting bracket to ensure that the metal mounting bracket is firmly secured. Install Main Unit • Slide main unit onto the clip bracket.
General Operations Your UCLEARTM HBC100 helmet communicator is now setup and ready to go! Answer button Status indicator Up button Speaker / charging socket Down button The operations described here are applicable to all modes of operations. Power On • Hold the Answer button for 2 seconds to power on the helmet communicator. The status indicator will blink blue and a power up tone can be heard. Power Off • To switch off the helmet communicator, press and hold the Answer button for 5 seconds.
General Operations Charging the Unit • To charge the helmet communicator, connect the provided charging cable to the speaker/ charging socket. Upon charging, if the unit is on, system would automatically initiate power down. Volume Control • The volume control of the helmet communicator can be controlled using the Up and Down buttons. Pressing the Up or Down button one time would increase or reduce the volume respectively. The volume control for each mode is independent of each other.
Mobile Phone Operations different devices linked to the helmet communicator in order to experience the most out of the helmet communicator. To use the helmet communicator with your mobile phone for the first time, you must first connect them wirelessly by pairing. Pairing • To connect the helmet communicator to a mobile phone, hold the Up and Down buttons for 2 seconds. This puts the helmet communicator into paring mode. The status indicator would blink blue and red alternately.
Mobile Phone Operations Voice Call • To activate voice call, hold the Down and Answer buttons for 2 second. The accuracy of this function is dependent on the mobile phone. Last Number Redial • To redial the last number, hold the Up and Answer buttons for 2 second. The capability of this function is dependent on the mobile phone used. 3 way calling • Whilst on a call, if an incoming call comes in, you may answer the call by pressing the Answer button once.
Music Streaming Operations To use the helmet communicator with your music dongle you must connect them first wirelessly first by pairing. This step is only required for music streaming dongles. Pairing • To connect the helmet communicator to a music dongle, hold the Up and Down buttons for 2 seconds. This puts the helmet communicator into paring mode. The status indicator would blink blue and red alternately. • Next, put the music dongle to pairing mode.
Intercom Operations To use the intercom profile on the helmet communicator for the first time, you would need to first connect the two UCLEARTM helmet communicators wirelessly by pairing. Pairing • Pairing readies one UCLEARTM helmet communicator to search for the other UCLEARTM helmet communicator. This pairing process needs to be carried out only once.
Button Configurations Summary The table below shows the button configurations.
Status Indicator Configurations Summary The table below shows the status indicator configurations.
Technical Data Unit Dimensions (L x W x H) 60mm x 40mm x 15mm Weight 30g Audio Frequency response 30Hz to 20kHz Sampling rate 48kHz, 16 bit SPL 105dB + 2dB THD 0.5% Bluetooth Specifications Version 2.1 EDR, Class 2 Profiles HSP, HFP, A2DP, AVRCP, Intercom Radio Carrier frequency 2.402–2.480 GHz Range Up to 10m (open field) RF output power -6 dBm to 4 dBm Power Power consumption 200mW (max) Power input (charging) 5V / 400mA / 2W Built-in battery 3.
Notices BATTERY WARNING: The UCLEARTM helmet communicator contains a rechargeable lithium ion polymer battery. To reduce risks of fire or burns, do not disassemble, crush, puncture, short external contacts or dispose in fire or water. CHARGING NOTICE: To reduce the risk of personal injury, electrical shock, fire or damage to equipments, please follow all the instructions below: - Do not immerse the product, AC adaptor or speakers in water.
Notices The sender will bear all transportation charges for functioning products but which were declared defective. LIMITATIONS OF WARRANTY: All product warranties for the product by UCLEARTM are limited to those mentioned in the product manual.
Notices agents, distributors, suppliers, resellers and all others in its supply and distribution chain either due to the designer’s or manufacturer’s negligence or omissions or any third parties involved. Always comply with the local law and traffic regulations. Where use of the product is not permitted or allowed by any laws and regulations including the traffic laws of your country, we warn you not to go against such restrictions.
Notices CORRECT DISPOSAL OF THIS PRODUCT: Do not dispose this product with other household wastes at the end of its working life. There is a separate collection system for used electronic products in accordance with legislation that requires proper treatment, recovery and recycling. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Notices TECHNICAL SUPPORT: For additional information please visit our website at www.uclear-digital.com For technical support please contact us at: technical@uclear-digital.com COPYRIGHTS: Copyright © 2010 BITwave Pte Ltd & FSC. All rights reserved. No part of this guide may be reproduced in any form or by any process whatsoever without prior written consent from BITwave Pte Ltd and FSC. LICENCES: The UCLEARTM trademark and logo is exclusively owned by BITwave Pte Ltd & FSC.
UCLEAR TM
