User's Manual

FCC Statement
1. Set up a hotspot on the smartphone
· Go to Wi-Fi hot
spot settings on the smartphone with
an internet connection.
· Set up Wi-Fi hotspot to be available.
2. Connect to Wi-Fi on M stick
· Go to Wi-Fi settings on M stick.
· Turn on Wi-Fi and select the smartphone from the
detected list.
· Enter the smartphone’s hotspot password
Simple User Manual
C – USB port for ex
ternal devices (Type F)
D – Heat dissipa
tion hole
E – Firmware update button
A –
USB port for connec
tion (Type M)
B – Status indic
ator
1. Insert into USB port
· Insert the M stick into the USB port on the car display
that supports Android Auto.
· Android Auto button will be activated on the car
display.
2. Tap Android Auto button
· Tap Android Auto button on the car display.
3. Proceed Setup Wizard
· Select the language you want in the Setup Wizard
· Tap START button
· Do no
t use the product f
or anything other than its original
purpose.
· Do not touch the product or USB port with wet hands or other
body parts.
· Do not leave the product in a place where there is a risk of
overheating.
· Place the product in a dry, moisture-free place.·
· Product can be damaged where the temperature is high or low.
· Be careful not to damage the product.
· Avoid dropping the product or external impact.
· If the product is damaged, do not use it damaged.
· Do not modify, separate or repair the product at your discretion.
· Be careful when cleaning the product.
· 
Be careful not t
o suck or bite the product by children, infants or pets.
· Do not stab your body such as e
yes or ears or put the product in
your mouth.
· If you are using a hearing aid, check and use the information
related to electromagnetic waves.
· 
Do not stor
e the product with metal products such as coins and keys.
· Do not leave the produc
t in a magnetic 󽗉eld.
· While driving, follow relevant laws and regulations or road safety
rules for product use.
The contents of the user manual may v
ary depending on the
software version of the product, the car display or the smartphone,
and some changes may be made without user noti󽗉cation.
Copyright ⓒ M GEARS
Product appearance How to use How to connect to the internet Caution
Product specification
Product components
- M stick
- Simple user manual
- USB ex
tension cable
- USB Y extension cable
www.m-gears.c
om
- 2 - - 3 - - 4 - - 5 -
Name Android dongle
Model MG-S01
OS) Android 9
CPU Quad-core (Cortex-A53)
RAM 2GB LPDDR4
ROM 16GB eMMC
Connectivity USB 2.0 / Wi-Fi (2.4GHz) / Bluetooth 4.2
Power DC 5V / 2.5W
Size/Weight 3.5x10x1.5cm / 0.3kg
<Android(Samsung)> <iPhone>
* This product is available on c
ar displays with Android
Auto that have been released since 2017. Please refer to
the website for the list of supported vehicles.
* Please refer to the website for information on how to
update 󽗉rmware.
* Network dat
a from the smartphone connected by Wi-Fi
is used when using real-time contents.
* Please ref
er to the website for detailed information on
how to connect to the internet.
* To use the hotspo
t, you need a SIM that can be tethering.
B
A
E
C
D
- 6 -
Changes or modifications not expressly approved by
the party responsible for compliance could void the
user's authority to operate the equipment.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment
and receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions
(1)this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed and
operated with minimum distance 20cm between the
radiator & your body
Android dongle