User's Manual

1. Set up a hotspot on the smartphone
· Go to Wi-Fi hotspo
t settings on the smartphone with
an internet connection.
· Set up Wi-Fi hotspot to be available.
2. Connect to Wi-Fi on M stick
· Go to Wi-Fi settings on M stick.
· Turn on Wi-Fi and select the smartphone from the
detected list.
· Enter the smartphone’s hotspot password
Simple User Manual
C – USB port for ext
ernal devices (Type F)
D – Heat dissipation hole
E – Firmw
are update button
A –
USB port for connection (T
ype M)
B – Status indica
tor
1. Insert into USB port
· Insert the M stick into the USB port on the car display
that supports Android Auto.
· Android Auto button will be activated on the car
display.
2. Tap Android Auto button
· Tap Android Auto button on the car display.
3. Proceed Setup Wizard
· Select the language you want in the Setup Wizard
· Tap START button
· Do not use the product for anything o
ther than its original
purpose.
· Do not touch the product or USB port with wet hands or other
body parts.
· Do not leave the product in a place where there is a risk of
overheating.
· Place the product in a dry, moisture-free place.·
· Product can be damaged where the temperature is high or low.
· Be careful not to damage the product.
· Avoid dropping the product or external impact.
· If the product is damaged, do not use it damaged.
· Do not modify, separate or repair the product at your discretion.
· Be careful when cleaning the product.
· 
Be careful not to suck or bit
e the product by children, infants or pets.
· Do not stab your body such as eyes or e
ars or put the product in
your mouth.
· If you are using a hearing aid, check and use the information
related to electromagnetic waves.
· 
Do not store the product with metal products such as coins and keys.
· Do not leave the product in a magne
tic 󽗉eld.
· While driving, follow relevant laws and regulations or road safety
rules for product use.
The contents of the user manual may vary depending on the
software version of the product, the car display or the smartphone,
and some changes may be made without user noti󽗉cation.
Copyright ⓒ M GEARS
Product appearance How to use How to connect to the internet Caution
Product specification
Product components
- M stick
- Simple user manual
- USB ext
ension cable
- USB Y extension cable
www.m-gears.com
- 2 - - 3 - - 4 - - 5 -
Name M stick
Model MG-S01
OS) Android 9
CPU Quad-core (Cort
ex-A53)
RAM 2GB LPDDR4
ROM 16GB eMMC
Connectivity USB 2.0 / Wi-Fi (2.4GHz) / Bluetooth 4.2
Power DC 5V / 2.5W
Size/Weight 3.5x10x1.5cm / 0.3kg
<Android(Samsung)> <iPhone>
* This product is available on car displays with Andr
oid
Auto that have been released since 2017. Please refer to
the website for the list of supported vehicles.
* Please refer t
o the website for information on how to
update 󽗉rmware.
* Network data fr
om the smartphone connected by Wi-Fi
is used when using real-time contents.
* Please refer t
o the website for detailed information on
how to connect to the internet.
* To use the hotspot, y
ou need a SIM that can be tethering.
B
A
E
C
D
Android dongle
MG-S01
· Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
· This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
· -- Reorient or relocate the receiving antenna.
· -- Increase the separation between the equipment and receiver.
·
·
-- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help
FCC Statement
· This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
-
6 -