Video Doorbell with Two-Way Audio Model: UVC-G4-Doorbell
Table of Contents Package Contents Before You Begin Hardware Overview Installation Setting Up the G4 Doorbell Sample Wiring Diagrams Specifications Safety Notices Electrical Safety Information Limited Warranty Compliance Declaration of Conformity Online Resources
Package Contents G4 Doorbell Chime Power Kit Angled Mounting Bracket Spade Wire Adapters Flat Mounting Bracket Screw Kit Washers
Before You Begin The G4 Doorbell Camera is designed to work with Ubiquiti’s new integrated camera management system, UniFi Protect. UniFi Protect is a flexible and powerful IP video surveillance system that can manage UniFi Protect cameras and the UniFi Protect mobile app. The software is free from all hosting and licensing fees and comes pre-installed on UniFi’s Cloud Key Gen2 Plus, model UCK-G2-PLUS.
Hardware Overview 1 2 3 4 5 1 Camera/Lens 5MP with day/night vision 2 Button Press button to chime doorbell. 3 Status LED The LED will flash during bootup. LED State Status Off Device is busy; do not power off. Breathing White Initialized, Device not configured. Flashing White System initializing. Steady White Device configured and working. Breathing Blue Device in use, two-way communication. Flashing Blue Device is shutting down. Steady Red Error or weak Wi-Fi signal.
Installation 1. Turn off the electrical breaker to the existing doorbell. 2. Remove the existing doorbell from its mounted location and disconnect all wires. Using the Angled Mounting Bracket 1. Pull the existing wires through the center opening of the Angled Mounting Bracket. 2. Pull the wires through the center opening of the Flat Mounting Bracket as you align it with the front of the Angled Mounting Bracket.
3. Align and place the Flat Mounting Bracket up against the Angled Mounting Bracket and mount them to the wall using the two longer screws from the included screw kit. 4.
5. Using a phillips screwdriver, connect the Spade Wire Adapters to the back of the G4 Doorbell. 6. Connect the copper wires to the Spade Wire Adapters by pressing down on the tabs and inserting one wire into each adapter.
7. Mount the G4 Doorbell onto the Flat Mounting Bracket. 8. Turn on the electrical breaker to power the G4 Doorbell.
Using the Flat Mounting Bracket 1. Pull the existing wires through the center opening of the Flat Mounting Bracket. 2. Secure the Flat Mounting Bracket to the wall using the two shorter screws from the screw kit. If the bracket does not sit flush against the wall, use the included washers to sit between the Flat Mounting Bracket and the wall.
3. Using a phillips screwdriver, connect the Spade Wire Adapters to the back of the G4 Doorbell. 4. Connect the copper wires to the Spade Wire Adapters by pressing down on the tabs and inserting one wire into each adapter.
5. Mount the G4 Doorbell onto the Flat Mounting Bracket. 6. Turn on the electrical breaker that powers the G4 Doorbell.
Setting Up the G4 Doorbell Download and install the UniFi Protect app to set up and configure the G4 Doorbell. 1. Launch the UniFi Protect app. 2. Click the menu in the upper right and tap Add Camera and select G4 Doorbell. 3. Select the wireless network to add the G4 Doorbell to. 4. 5. 6. 7. Enter the password for the wireless network and click OK. Enter a name for the G4 Doorbell and tap Next. The G4 Doorbell now appears in UniFi Protect. Installation complete.
Sample Wiring Diagrams Installation with Chime Box Chimebox FRONT Transformer 16V~24VAC Chimebox TRANS REAR FRONT Transformer 16V~24VAC TRANS REAR Installation without Chime Box Transformer 16V~24VAC Transformer 16V~24VAC
Specifications UVC-G4-Doorbell Dimensions 118.3 x 46.8 x 25.8 mm (4.66 x 1.84 x 1.02") Weight 200 g (1.03 lb) Networking Interface Wi-Fi 802.11ac Management Interface UniFi Protect Night Mode Built-In IR LED Illumination IR Cut Filter View Angle 114° (H), 138° (V), 155° (D) Resolution 1600 x 1200 Max. Frame Rate Microphone Speaker Power Supply Max.
Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in a location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. Electrical Safety Information 1.
Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
ISED Canada CAN ICES-3(B)/NMB-3(B) This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. 2. This device may not cause interference, and This device must accept any interference, including interference that may cause undesired operation of the device. This radio transmitter (IC: 6545A-UVCG4DB) has been approved by ISED Canada.
IMPORTANT NOTE: Radiation Exposure Statement: • This equipment complies with radiation exposure limits set forth for an uncontrolled environment. • This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. • This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities.
Español La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
Declaration of Conformity български [Bulgarian] С настоящото UBIQUITI декларира, че това устройство UVC-G4-Doorbell е в съответствие със съществените изисквания и други приложими разпоредби на Директиви 2014/53/EC, 2014/30/ЕС, 2014/35/ЕС. Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес: ui.
Íslenska [Icelandic] Hér, UBIQUITI, því yfir að þetta UVC-G4-Doorbell tæki er í samræmi við grunnkröfur og önnur viðeigandi ákvæði tilskipana 2014/53/ESB, 2014/30/ESB, 2014/35/ESB. Fullur texti ESB samræmisyfirlýsing er að finna á eftirfarandi netfangi: ui.com/compliance Italiano [Italian] Con la presente, UBIQUITI, dichiara che questo dispositivo UVC-G4-Doorbell, è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti delle direttive 2014/53/UE, 2014/30/UE, 2014/35/UE.
Online Resources Support help.ui.com Community community.ui.com Downloads downloads.ui.com Ubiquiti Inc. 685 Third Avenue New York, NY 10017 USA ©2019 Ubiquiti Inc. All rights reserved. Ubiquiti, the Ubiquiti U logo, the Ubiquiti beam logo, UniFi Protect and UniFi are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. All other trademarks are the property of their respective owners. Apple and the Apple logo are trademarks of Apple Inc.
