48-Port 25 Gbps SFP28 and 6-Port 100 Gbps QSFP28 Data Center Access Switch Model: USW-Leaf
• • • • • • • • • • • • • • • • Package Contents Hardware Overview Installation Requirements Hardware Installation Connecting Power Connecting SFP28 Initial Setup via Bluetooth UniFi Controller Software Specifications Safety Notices Electrical Safety Information Limited Warranty Compliance FCC WEEE Compliance Statement Declaration of Conformity
Package Contents UniFi Switch Leaf Rackmount Brackets (Qty. 2) Bracket Screws (Qty. 8) Mounting Screws (Qty. 4) Long Slide Rail Brackets (Qty. 2) Slide Rail Bracket Screws (Qty. 4) SFP28 (25G) DAC Cable, 1 m Cage Nuts (Qty. 4) Short Slide Rail Brackets (Qty. 2) Rail Mounting Screws (Qty. 4) Power Cords (Qty. 2) Square Hole Washers (Qty. 4) Rubber Feet (Qty.
System Requirements • Linux, Mac OS X, or Microsoft Windows 7/8/10 • Java Runtime Environment 1.6 (1.8 or newer recommended) • Web Browser: Google Chrome (Other browsers may have limited functionality.) • UniFi Controller software v5.12.x (or newer), available at: ui.com/download/unifi IMPORTANT: We strongly recommend using UPS backup and power regulation to prevent equipment damage due to stability issues with local AC power.
Port LEDs 2 SFP28 10G/25G Link/Activity LED (Ports 1 - 48) 3 QSFP28 40G/100G Link/Activity LED (Ports 49 - 54) State Status Off No Link White Link Established at 10/25 Gbps Flashing Indicates Activity Off No Link White Link Established at 40/100 Gbps Flashing Indicates Activity Ports Port 4 QSFP28 40G/100G (Ports 49 - 54) 5 SFP28 10G/25G (Ports 1 - 48) Description QSFP28 ports support 40/100 Gbps connections.
Reset and Console Button Description This button serves two functions for the UniFi Switch: 6 Reset Button • Restart Press and release the Reset button quickly. • Restore to Factory Default Settings Press and hold the Reset button for more than five seconds. The USB Type C console port is for CLI management, which is also available via SSH after initial network settings are configured via USB. For more information, go to: help.ui.
Installation Requirements • Phillips screwdriver • Standard-sized, 19" wide, four-post rack with a minimum of 1U height available Hardware Installation The USW-Leaf has airflow ventilation from front to rear. Orient the rear panel towards the hot aisle. 1.
2.
3. 4.
5.
Connecting Power 1. 2.
3. 4.
Connecting SFP28 1. 2.
Initial Setup via Bluetooth 1. 2. 1.5 m 1.
3. 4. Follow the on-screen instructions.
UniFi Controller Software The initial setup allows you to adopt the UniFi Switch later. After initial setup, there are two methods available to adopt the UniFi Switch via the UniFi Controller software: • Over an untagged switch port by the default VLAN 1 • Over a tagged VLAN on a switch port, and you choose which VLAN is used for management Note: You have two management options: • UniFi Controller Software • CLI You cannot use both simultaneously; otherwise, changes may not be implemented properly.
Specifications USW-Leaf Dimensions Weight With Rackmount Brackets Interfaces Networking Management Power Method Power Supply Supported Voltage Range Max. Power Consumption Excluding SFP28/QSFP28 Modules Including Full SFP28/ QSFP28 Modules LEDs System SFP28 Data Ports QSFP28 Data Ports 442.4 x 440 x 43.7 mm (17.42 x 17.32 x 1.72") 8.00 kg (17.64 lb) 8.09 kg (17.
Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. WARNING: Do not use this product in location that can be submerged by water.
Limited Warranty ui.com/support/warranty The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions. Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1.
CAN ICES-3(A)/NMB-3(A) Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. l’appareil ne doit pas produire de brouillage; 2. l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Le présent émetteur radio IC : 6545A-USWLEAF a été approuvé par ISDE Canada.
CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it. Note: This device meets Max. TX power limit per ETSI regulations. WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams.
Español La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
Declaration of Conformity български [Bulgarian] С настоящото UBIQUITI декларира, че това устройство USW-Leaf е в съответствие със съществените изисквания и други приложими разпоредби на Директиви 2014/53/EC, 2014/30/ЕС, 2014/35/ЕС. Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес: ui.
Italiano [Italian] Con la presente, UBIQUITI, dichiara che questo dispositivo USW-Leaf, è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti delle direttive 2014/53/UE, 2014/30/UE, 2014/35/UE. Il testo completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet: ui.
Online Resources Support help.ui.com Community community.ui.com Downloads downloads.ui.com Ubiquiti Inc. 685 Third Avenue New York, NY 10017 USA ©2019 Ubiquiti Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, and UniFi are trademarks or registered trademarks of Ubiquiti Inc. in the United States and in other countries. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.
