Data Sheet

ManualsBrandsUBIQUITI ManualsElectronicsUNMS R Pro

Dimensions 210.4 x 140.2 x 43.7 mm (8.28 x 5.52 x 1.72")

Weight 1.45 kg (3.2 lb)

Enclosure Material SGCC Steel

Networking Interfaces (8) 10/100/1000 Mbps RJ45 LAN Ports

(1) 10/100/1000 Mbps RJ45 WAN Port

(1) 1/10 Gbps SFP+ LAN Port

(1) 1/10 Gbps SFP+ WAN Port

Management Interface Ethernet In-Band

Bluetooth BLE

Processor Quad ARM Cortex-A57 Core at 1.7 GHz

UNMS-R-Pro

Datasheet

Mechanical

Hardware

UNMS Router Pro

UNMS-R-Pro is a high-performance router with (2) high-speed

SFP+ and (9) Gigabit RJ45 ports. By default, it supports dual-WAN

ports: (1) 10G SFP+ and (1) Gigabit RJ45 and features built-in

switching on (8) Gigabit RJ45 ports. Use the Ubiquiti

Network

Management System (UNMS) for centralized control and

monitoring of all UNMS devices.

Summary of content (5 pages)

PAGE 1
UNMS-R-Pro Datasheet UNMS Router Pro UNMS-R-Pro is a high-performance router with (2) high-speed SFP+ and (9) Gigabit RJ45 ports. By default, it supports dual-WAN ports: (1) 10G SFP+ and (1) Gigabit RJ45 and features built-in switching on (8) Gigabit RJ45 ports. Use the Ubiquiti ® Network Management System (UNMS) for centralized control and monitoring of all UNMS devices. Mechanical Dimensions 210.4 x 140.2 x 43.7 mm (8.28 x 5.52 x 1.72") Weight 1.45 kg (3.
PAGE 2
System Memory 4 GB DDR4 On-Board Flash Storage 16 GB eMMC Power Method (1) External AC/DC Adapter (1) UNMS Connector DC Input Power Supply 24VDC, 2.5A Power Adapter (Included) Supported Voltage Range 24 - 28VDC Max.
PAGE 3
RJ45 Data Ports Speed/Link/Activity SFP+ Data Ports Speed/Link/Activity Speci cations are subject to change. Ubiquiti products are sold with a limited warranty described at: www.ui.com/support/warranty ©2020 Ubiquiti Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, and UNMS are trademarks or registered trademarks of Ubiquiti Inc. in the United States and in other countries. All other trademarks are the property of their respective owners.
PAGE 4
FCC & IC Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment Operation of this device is subject to the following conditions: 1. this device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation. L’exploitation est autorisée aux deux conditions suivantes: 1. l’appareil ne doit pas produire de brouillage; 2.
PAGE 5
"IMPORTANT NOTE: Radiation Exposure Statement: -This equipment complies with radiation exposure limits set forth for an uncontrolled environment. -This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. -This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.