UniFi Access Control Reader Pro Model: UA-Pro
System Components UA-Pro Note: Each UniFi Access component and all third-party accessories are sold separately.
Sample Wiring Topology PoE IN UA-Hub Push Motion Sensor Push Button Door Position Switch Siren External-Powered Door Opener Magnetic Lock Outside UVC-G3-FLEX UA-Pro UA-Lite Peripherals To PoE BT UA-Pro UA-Lite UVC-G3 FLEX Sample UniFi Access Diagram
Access Reader Run an Ethernet cable from the UA-Hub location to the install location of the access reader. Depending on your system setup, the access reader can be installed on either the inside or the outside of the door. UA-Pro 1. Separate the UA-Pro from its mount by removing the security screw from underneath the device. 2. Place the mount against the wall and use it as a template to mark the area where the UA-Pro will be installed. 3.
4. Pull the Ethernet cable from the wall and feed it through the mount. 5. Insert the mount into the wall and use the bottom clip to adjust the camera mount, left or right, until it is level. 6. Secure the mount to the wall using two screws and remove the level template.
7. Connect the Ethernet cable to UA-Pro and secure it to the mount using the security screw that was removed in step one. UID App Download and install the UID app to set up and configure your UniFi Access system. 1. Launch the UID app. 2. Follow the on-screen prompts to complete the installation.
Specifications UA-Pro Dimensions 73.40 x 62.28 x 26.55 mm (2.89 x 2.45 x 1.05") Weight 85 g (2.99 oz) Mounting Options Wall-mount or alloy clamp holder Camera Viewing Angle 147.5º ± 3º Max. Power Consumption 8.3W Power Supply 802.3af PoE LEDs Blue, White Connectivity Ethernet, BLE 4.2 Operating Temperature -10 to 40º C (14 to 104º F) Operating Humidity 20 to 95% Non-condensing Certifications CE, FCC, IC NFC Frequency Read Range Standards Technology 13.
Safety Notices 1. 2. Read, follow, and keep these instructions. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Do not use this product in location that can be submerged by water. Electrical Safety Information 1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer’s label.
Compliance FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
CAN ICES-3(B)/NMB-3(B) Pour réduire le risque d’interférence aux autres utilisateurs, le type d’antenne et son gain doivent être choisies de façon que la puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire pour une communication réussie. Cet appareil est conforme à la norme RSS Industrie Canada exempts de licence norme(s). Son fonctionnement est soumis aux deux conditions suivantes: 1. Cet appareil ne peut pas provoquer d’interférences et 2.
RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities.
Français La directive européenne 2012/19/UE exige que l’équipement sur lequel est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté avec les autres ordures ménagères. Ce symbole indique que le produit doit être éliminé dans un circuit distinct de celui pour les déchets des ménages.
Declaration of Conformity български [Bulgarian] С настоящото Ubiquiti декларира, че това устройство UA-Pro е в съответствие със съществените изисквания и други приложими разпоредби на Директиви 2014/53/ЕС. Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес: www.ui.com/compliance Hrvatski [Croatian] Ubiquiti ovim putem izjavljuje da je ovaj uređaj UA-Pro sukladan osnovnim zahtjevima i ostalim bitnim odredbama Direktiva 2014/53/EU.
Íslenska [Icelandic] Hér, Ubiquiti, því yfir að þetta UA-Pro tæki er í samræmi við grunnkröfur og önnur viðeigandi ákvæði tilskipana 2014/53/ESB. Fullur texti ESB samræmisyfirlýsing er að finna á eftirfarandi netfangi: www.ui.com/compliance Italiano [Italian] Con la presente, Ubiquiti, dichiara che questo dispositivo UA-Pro, è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti delle direttive 2014/53/UE.
Ubiquiti Inc. 685 Third Avenue, 27th Floor New York, NY 10017 USA Support help.ui.com Community community.ui.com Downloads downloads.ui.com ©2019 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, the Ubiquiti U logo, the Ubiquiti beam logo, and UniFi Access are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. Apple, the Apple logo, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.