Advanced Gigabit Router with PoE and SFP Model: ER-X-SFP
Introduction Thank you for purchasing the Ubiquiti Networks® EdgeRouter™ X SFP. This Quick Start Guide is designed to guide you through installation and also includes warranty terms. Package Contents EdgeRouter X SFP Power Adapter (24V, 2.5A) Advanced Gigabit Router with PoE and SFP Model: ER-X-SFP Power Cord Quick Start Guide TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above).
Installation Requirements • For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use. • For outdoor applications, shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the power supply. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial‑grade, shielded Ethernet cable from Ubiquiti Networks. For more details, visit www.ubnt.
Top Panel Power PoE Link/Act eth5 Power LED State Status Off Power Off Green Power On Off No Link Green 100/1000 Mbps (1 Gbps) Link Flashing Indicates Activity Off No PoE Green 24V Passive Off No Link Green 10/100/1000 Mbps Link Flashing Indicates Activity Status Link/Act eth0-eth4 PoE Link/Act
Back Panel Power Reset Ground Button Description There are two methods to reset the EdgeRouter X SFP to factory defaults: Runtime Reset (Recommended) Reset The EdgeRouter X SFP should be running after bootup is complete. Press and hold the Reset button for about 10 seconds until the eth4 Link LED starts flashing and then becomes solidly lit. After a few seconds, the LED will turn off, and the EdgeRouter X SFP will automatically reboot. Power-on Reset 1.
Hardware Installation Place the EdgeRouter X SFP on a flat, horizontal surface or mount it on a wall (mounting screws not included). WARNING: FAILURE TO PROVIDE PROPER VENTILATION MAY CAUSE FIRE HAZARD. KEEP AT LEAST 20 MM OF CLEARANCE NEXT TO THE VENTILATION HOLES FOR ADEQUATE AIRFLOW. Connecting Power 1. Connect the Power Adapter to the Power port. 2. Connect the Power Cord to the Power Adapter. Connect the other end of the Power Cord to a power outlet.
Connecting Ethernet 1. Connect an Ethernet cable from your computer or host system to the port labeled eth0 on the EdgeRouter X SFP. Note: PoE is disabled by default. 2. Connect Ethernet cables from the Ethernet ports of your devices to the rest of the ports in this range: eth1-eth4.
Using the SFP Port (Optional) To use the eth5/SFP port: 1. Remove the protective plug covering the eth5/SFP port. 2. Plug a fiber SFP module into the eth5/SFP port. SN: 9 DDM 15 m 2617 K M310nC 20KM - 20 /Rx1 s SM/S 0M 50nm 00 Mbp 1 Tx15 F1000 E 1308 05 3. Connect a fiber optic cable to the fiber SFP module. Then connect the other end of the cable to another fiber device. For information about compatible fiber SFP modules, visit: community.ubnt.
Accessing the Configuration Interface Note: Ensure that your host system is connected to the eth0 port of the EdgeRouter X SFP. 1. Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet. 2. Launch your web browser. Type https://192.168.1.1 in the address field. Press enter (PC) or return (Mac). 3. The login screen will appear. Enter ubnt in the Username and Password fields.
Configuring PoE Settings WARNING: Before activating 24V passive PoE, ensure that the connected device supports PoE and the supplied voltage. 1. On the Dashboard screen, go to Actions > PoE for the interface you want to configure. 2. Select 24V from the PoE drop‑down menu. 3. Click Save. For more information, refer to the EdgeOS User Guide, which is available at documentation.ubnt.
Specifications EdgeRouter X SFP Dimensions Weight Max. Power Consumption Max. Total PoE Output 142 x 75 x 23 mm (5.59 x 2.95 x 0.91") 215 g (7.58 oz) 5W 50W @ 24V PoE Output Passive 24V (Pins 4, 5+; 7, 8-) Power Input 24VDC, 2.
Safety Notices 1. Read, follow, and keep these instructions. 2. Heed all warnings. 3. Only use attachments/accessories specified by the manufacturer. WARNING: Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. WARNING: Do not use this product in location that can be submerged by water.
Limited Warranty UBIQUITI NETWORKS, Inc (“UBIQUITI NETWORKS”) warrants that the product(s) furnished hereunder (the “Product(s)”) shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation.
Disclaimer EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PUR
Note Some countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you.
Australia and New Zealand Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it.
Español La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
Declaration of Conformity Česky [Czech] UBIQUITI NETWORKS tímto prohlašuje, že toto UBIQUITI NETWORKS zařízení, je ve shod se základními požadavky a dalšími příslušnými ustanoveními směrnic 2014/30/EU, 2014/35/EU. Dansk [Danish] Hermed, UBIQUITI NETWORKS, erklærer at denne UBIQUITI NETWORKS enhed, er i overensstemmelse med de væsentlige krav og øvrige relevante krav i direktiver 2014/30/EU, 2014/35/EU.
Malti [Maltese] Hawnhekk, UBIQUITI NETWORKS, tiddikjara li dan il-mezz UBIQUITI NETWORKS huwa konformi mar-rekwiżiti essenzjali u dispożizzjonijiet rilevanti oħrajn ta ‘Direttivi 2014/30/UE, 2014/35/UE. Herved UBIQUITI NETWORKS, erklærer at denne UBIQUITI NETWORKS Norsk [Norwegian] enheten, er i samsvar med de grunnleggende kravene og andre relevante bestemmelser i direktivene 2014/30/EU, 2014/35/EU.
www.ubnt.com ©2015-2016 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, EdgeMAX, EdgeOS, EdgeRouter, and TOUGHCable are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. All other trademarks are the property of their respective owners.
